arm/dts/at91sam9g45-gurnard.dts

2  * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
4  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 /dts-v1/;
17 		stdout-path = "serial0:115200n8";
21 		reg = <0x20000000 0x8000000>;
26 			clock-frequency = <32768>;
30 			clock-frequency = <18432000>;
35 		u-boot,dm-pre-reloc;
38 			u-boot,dm-pre-reloc;
40 			display-timings {
42 					clock-frequency = <4166666>;
45 					hfront-porch = <1>;
46 					hback-porch = <1>;
47 					hsync-len = <1>;
48 					vback-porch = <4>;
49 					vfront-porch = <2>;
50 					vsync-len = <1>;
51 					hsync-active = <0>;
52 					vsync-active = <0>;
56 					clock-frequency = <4166666>;
59 					hfront-porch = <2>;
60 					hback-porch = <2>;
61 					hsync-len = <10>;
62 					vback-porch = <2>;
63 					vfront-porch = <2>;
64 					vsync-len = <10>;
65 					hsync-active = <0>;
66 					vsync-active = <0>;
82 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
94 				phy-mode = "rmii";
99 				pinctrl-0 = <
105 					reg = <1>;
106 					bus-width = <4>;
107 					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
113 				pinctrl-0 = <&pinctrl_ssc0_tx>;
117 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
120 					spi-max-frequency = <50000000>;
121 					reg = <1>;
126 				atmel,wakeup-counter = <10>;
127 				atmel,wakeup-rtt-timer;
130 			rtc@fffffd20 {
131 				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
145 			nand-bus-width = <8>;
146 			nand-ecc-mode = "hardware";
147 			nand-on-flash-bbt;
152 			atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;