Lines Matching +full:at91rm9200 +full:- +full:tcb
2 * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
4 * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
10 #include <dt-bindings/pinctrl/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/clock/at91.h>
18 interrupt-parent = <&aic>;
38 compatible = "arm,arm926ej-s";
49 compatible = "fixed-clock";
50 #clock-cells = <0>;
51 clock-frequency = <0>;
55 compatible = "fixed-clock";
56 #clock-cells = <0>;
57 clock-frequency = <0>;
62 compatible = "mmio-sram";
67 compatible = "simple-bus";
68 #address-cells = <1>;
69 #size-cells = <1>;
71 u-boot,dm-pre-reloc;
74 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
78 clock-names = "ohci_clk", "hclk", "uhpck";
83 compatible = "atmel,at91sam9261-lcdc";
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_fb>;
89 clock-names = "lcdc_clk", "hclk";
94 compatible = "atmel,at91rm9200-nand";
95 #address-cells = <1>;
96 #size-cells = <1>;
98 atmel,nand-addr-offset = <22>;
99 atmel,nand-cmd-offset = <21>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_nand>;
110 compatible = "simple-bus";
111 #address-cells = <1>;
112 #size-cells = <1>;
114 u-boot,dm-pre-reloc;
117 compatible = "atmel,at91rm9200-tcb";
123 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
127 compatible = "atmel,at91sam9261-udc";
131 clock-names = "pclk", "hclk";
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
142 #address-cells = <1>;
143 #size-cells = <0>;
145 clock-names = "mci_clk";
150 compatible = "atmel,at91sam9261-i2c";
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_i2c_twi>;
155 #address-cells = <1>;
156 #size-cells = <0>;
162 compatible = "atmel,at91sam9260-usart";
165 atmel,use-dma-rx;
166 atmel,use-dma-tx;
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_usart0>;
170 clock-names = "usart";
175 compatible = "atmel,at91sam9260-usart";
178 atmel,use-dma-rx;
179 atmel,use-dma-tx;
180 pinctrl-names = "default";
181 pinctrl-0 = <&pinctrl_usart1>;
183 clock-names = "usart";
188 compatible = "atmel,at91sam9260-usart";
191 atmel,use-dma-rx;
192 atmel,use-dma-tx;
193 pinctrl-names = "default";
194 pinctrl-0 = <&pinctrl_usart2>;
196 clock-names = "usart";
201 compatible = "atmel,at91rm9200-ssc";
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
207 clock-names = "pclk";
212 compatible = "atmel,at91rm9200-ssc";
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
218 clock-names = "pclk";
223 compatible = "atmel,at91rm9200-ssc";
226 pinctrl-names = "default";
227 pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
229 clock-names = "pclk";
234 #address-cells = <1>;
235 #size-cells = <0>;
236 compatible = "atmel,at91rm9200-spi";
238 cs-gpios = <0>, <0>, <0>, <0>;
240 pinctrl-names = "default";
241 pinctrl-0 = <&pinctrl_spi0>;
243 clock-names = "spi_clk";
248 #address-cells = <1>;
249 #size-cells = <0>;
250 compatible = "atmel,at91rm9200-spi";
253 pinctrl-names = "default";
254 pinctrl-0 = <&pinctrl_spi1>;
256 clock-names = "spi_clk";
261 compatible = "atmel,at91sam9260-sdramc";
266 compatible = "atmel,at91sam9260-bus-matrix", "syscon";
270 aic: interrupt-controller@fffff000 {
271 #interrupt-cells = <3>;
272 compatible = "atmel,at91rm9200-aic";
273 interrupt-controller;
275 atmel,external-irqs = <29 30 31>;
279 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_dbgu>;
285 clock-names = "usart";
290 compatible = "atmel,at91rm9200-gpio";
293 #gpio-cells = <2>;
294 gpio-controller;
295 interrupt-controller;
296 #interrupt-cells = <2>;
298 u-boot,dm-pre-reloc;
302 compatible = "atmel,at91rm9200-gpio";
305 #gpio-cells = <2>;
306 gpio-controller;
307 interrupt-controller;
308 #interrupt-cells = <2>;
310 u-boot,dm-pre-reloc;
314 compatible = "atmel,at91rm9200-gpio";
317 #gpio-cells = <2>;
318 gpio-controller;
319 interrupt-controller;
320 #interrupt-cells = <2>;
322 u-boot,dm-pre-reloc;
326 #address-cells = <1>;
327 #size-cells = <1>;
328 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
334 atmel,mux-mask =
339 u-boot,dm-pre-reloc;
343 u-boot,dm-pre-reloc;
344 pinctrl_dbgu: dbgu-0 {
352 pinctrl_usart0: usart0-0 {
358 pinctrl_usart0_rts: usart0_rts-0 {
363 pinctrl_usart0_cts: usart0_cts-0 {
370 pinctrl_usart1: usart1-0 {
376 pinctrl_usart1_rts: usart1_rts-0 {
381 pinctrl_usart1_cts: usart1_cts-0 {
388 pinctrl_usart2: usart2-0 {
394 pinctrl_usart2_rts: usart2_rts-0 {
399 pinctrl_usart2_cts: usart2_cts-0 {
406 pinctrl_nand: nand-0 {
414 pinctrl_mmc0_clk: mmc0_clk-0 {
419 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
425 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
434 pinctrl_ssc0_tx: ssc0_tx-0 {
441 pinctrl_ssc0_rx: ssc0_rx-0 {
450 pinctrl_ssc1_tx: ssc1_tx-0 {
457 pinctrl_ssc1_rx: ssc1_rx-0 {
466 pinctrl_ssc2_tx: ssc2_tx-0 {
473 pinctrl_ssc2_rx: ssc2_rx-0 {
482 pinctrl_spi0: spi0-0 {
491 pinctrl_spi1: spi1-0 {
500 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
504 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
508 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
512 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
516 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
520 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
524 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
528 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
532 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
538 pinctrl_i2c_bitbang: i2c-0-bitbang {
543 pinctrl_i2c_twi: i2c-0-twi {
551 pinctrl_fb: fb-0 {
579 compatible = "atmel,at91rm9200-pmc", "syscon";
582 interrupt-controller;
583 #address-cells = <1>;
584 #size-cells = <0>;
585 #interrupt-cells = <1>;
586 u-boot,dm-pre-reloc;
589 compatible = "atmel,at91rm9200-clk-main-osc";
590 #clock-cells = <0>;
591 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
596 compatible = "atmel,at91rm9200-clk-main";
597 #clock-cells = <0>;
602 compatible = "atmel,at91rm9200-clk-pll";
603 #clock-cells = <0>;
604 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
607 atmel,clk-input-range = <1000000 32000000>;
608 #atmel,pll-clk-output-range-cells = <4>;
609 atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
614 compatible = "atmel,at91rm9200-clk-pll";
615 #clock-cells = <0>;
616 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
619 atmel,clk-input-range = <1000000 5000000>;
620 #atmel,pll-clk-output-range-cells = <4>;
621 atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
625 compatible = "atmel,at91rm9200-clk-master";
626 #clock-cells = <0>;
627 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
629 atmel,clk-output-range = <0 94000000>;
630 atmel,clk-divisors = <1 2 4 0>;
631 u-boot,dm-pre-reloc;
635 compatible = "atmel,at91rm9200-clk-usb";
636 #clock-cells = <0>;
637 atmel,clk-divisors = <1 2 4 0>;
642 compatible = "atmel,at91rm9200-clk-programmable";
643 #address-cells = <1>;
644 #size-cells = <0>;
645 interrupt-parent = <&pmc>;
649 #clock-cells = <0>;
655 #clock-cells = <0>;
661 #clock-cells = <0>;
667 #clock-cells = <0>;
674 compatible = "atmel,at91rm9200-clk-system";
675 #address-cells = <1>;
676 #size-cells = <0>;
679 #clock-cells = <0>;
685 #clock-cells = <0>;
691 #clock-cells = <0>;
697 #clock-cells = <0>;
703 #clock-cells = <0>;
709 #clock-cells = <0>;
715 #clock-cells = <0>;
721 #clock-cells = <0>;
728 compatible = "atmel,at91rm9200-clk-peripheral";
729 #address-cells = <1>;
730 #size-cells = <0>;
732 u-boot,dm-pre-reloc;
735 #clock-cells = <0>;
737 u-boot,dm-pre-reloc;
741 #clock-cells = <0>;
743 u-boot,dm-pre-reloc;
747 #clock-cells = <0>;
749 u-boot,dm-pre-reloc;
753 #clock-cells = <0>;
758 #clock-cells = <0>;
763 #clock-cells = <0>;
768 #clock-cells = <0>;
773 #clock-cells = <0>;
779 #clock-cells = <0>;
783 #clock-cells = <0>;
788 #clock-cells = <0>;
793 #clock-cells = <0>;
798 #clock-cells = <0>;
803 #clock-cells = <0>;
808 #clock-cells = <0>;
813 #clock-cells = <0>;
818 #clock-cells = <0>;
823 #clock-cells = <0>;
828 #clock-cells = <0>;
835 compatible = "atmel,at91sam9260-rstc";
841 compatible = "atmel,at91sam9260-shdwc";
847 compatible = "atmel,at91sam9260-pit";
854 compatible = "atmel,at91sam9260-rtt";
862 compatible = "atmel,at91sam9260-wdt";
870 compatible = "atmel,at91sam9260-gpbr", "syscon";
878 compatible = "i2c-gpio";
879 pinctrl-names = "default";
880 pinctrl-0 = <&pinctrl_i2c_bitbang>;
883 i2c-gpio,sda-open-drain;
884 i2c-gpio,scl-open-drain;
885 i2c-gpio,delay-us = <2>; /* ~100 kHz */
886 #address-cells = <1>;
887 #size-cells = <0>;