Lines Matching +full:at91sam9260 +full:- +full:adc
2 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
6 * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
18 model = "Atmel AT91SAM9260 family SoC";
19 compatible = "atmel,at91sam9260";
20 interrupt-parent = <&aic>;
41 compatible = "arm,arm926ej-s";
52 compatible = "fixed-clock";
53 #clock-cells = <0>;
54 clock-frequency = <0>;
58 compatible = "fixed-clock";
59 #clock-cells = <0>;
60 clock-frequency = <0>;
64 compatible = "fixed-clock";
65 #clock-cells = <0>;
66 clock-frequency = <5000000>;
71 compatible = "mmio-sram";
76 compatible = "simple-bus";
77 #address-cells = <1>;
78 #size-cells = <1>;
80 u-boot,dm-pre-reloc;
83 compatible = "simple-bus";
84 #address-cells = <1>;
85 #size-cells = <1>;
87 u-boot,dm-pre-reloc;
89 aic: interrupt-controller@fffff000 {
90 #interrupt-cells = <3>;
91 compatible = "atmel,at91rm9200-aic";
92 interrupt-controller;
94 atmel,external-irqs = <29 30 31>;
98 compatible = "atmel,at91sam9260-sdramc";
103 compatible = "atmel,at91sam9260-pmc", "syscon";
106 interrupt-controller;
107 #address-cells = <1>;
108 #size-cells = <0>;
109 #interrupt-cells = <1>;
110 u-boot,dm-pre-reloc;
113 compatible = "atmel,at91rm9200-clk-main-osc";
114 #clock-cells = <0>;
115 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
120 compatible = "atmel,at91rm9200-clk-main";
121 #clock-cells = <0>;
126 compatible = "fixed-clock";
127 #clock-cells = <0>;
128 clock-frequency = <32768>;
129 clock-accuracy = <50000000>;
133 compatible = "atmel,at91sam9260-clk-slow";
134 #clock-cells = <0>;
139 compatible = "atmel,at91rm9200-clk-pll";
140 #clock-cells = <0>;
141 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
144 atmel,clk-input-range = <1000000 32000000>;
145 #atmel,pll-clk-output-range-cells = <4>;
146 atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
151 compatible = "atmel,at91rm9200-clk-pll";
152 #clock-cells = <0>;
153 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
156 atmel,clk-input-range = <1000000 5000000>;
157 #atmel,pll-clk-output-range-cells = <4>;
158 atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
162 compatible = "atmel,at91rm9200-clk-master";
163 #clock-cells = <0>;
164 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
166 atmel,clk-output-range = <0 105000000>;
167 atmel,clk-divisors = <1 2 4 0>;
168 u-boot,dm-pre-reloc;
172 compatible = "atmel,at91rm9200-clk-usb";
173 #clock-cells = <0>;
174 atmel,clk-divisors = <1 2 4 0>;
179 compatible = "atmel,at91rm9200-clk-programmable";
180 #address-cells = <1>;
181 #size-cells = <0>;
182 interrupt-parent = <&pmc>;
186 #clock-cells = <0>;
192 #clock-cells = <0>;
199 compatible = "atmel,at91rm9200-clk-system";
200 #address-cells = <1>;
201 #size-cells = <0>;
204 #clock-cells = <0>;
210 #clock-cells = <0>;
216 #clock-cells = <0>;
222 #clock-cells = <0>;
229 compatible = "atmel,at91rm9200-clk-peripheral";
230 #address-cells = <1>;
231 #size-cells = <0>;
233 u-boot,dm-pre-reloc;
236 #clock-cells = <0>;
238 u-boot,dm-pre-reloc;
242 #clock-cells = <0>;
244 u-boot,dm-pre-reloc;
248 #clock-cells = <0>;
250 u-boot,dm-pre-reloc;
254 #clock-cells = <0>;
259 #clock-cells = <0>;
264 #clock-cells = <0>;
269 #clock-cells = <0>;
274 #clock-cells = <0>;
279 #clock-cells = <0>;
285 #clock-cells = <0>;
289 #clock-cells = <0>;
294 #clock-cells = <0>;
299 #clock-cells = <0>;
304 #clock-cells = <0>;
309 #clock-cells = <0>;
314 #clock-cells = <0>;
319 #clock-cells = <0>;
324 #clock-cells = <0>;
329 #clock-cells = <0>;
334 #clock-cells = <0>;
339 #clock-cells = <0>;
344 #clock-cells = <0>;
349 #clock-cells = <0>;
354 #clock-cells = <0>;
359 #clock-cells = <0>;
366 compatible = "atmel,at91sam9260-rstc";
372 compatible = "atmel,at91sam9260-shdwc";
378 compatible = "atmel,at91sam9260-pit";
385 compatible = "atmel,at91rm9200-tcb";
391 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
395 compatible = "atmel,at91rm9200-tcb";
401 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
405 compatible = "atmel,at91rm9200-gpio";
408 #gpio-cells = <2>;
409 gpio-controller;
410 interrupt-controller;
411 #interrupt-cells = <2>;
413 u-boot,dm-pre-reloc;
417 compatible = "atmel,at91rm9200-gpio";
420 #gpio-cells = <2>;
421 gpio-controller;
422 interrupt-controller;
423 #interrupt-cells = <2>;
425 u-boot,dm-pre-reloc;
429 compatible = "atmel,at91rm9200-gpio";
432 #gpio-cells = <2>;
433 gpio-controller;
434 interrupt-controller;
435 #interrupt-cells = <2>;
437 u-boot,dm-pre-reloc;
441 #address-cells = <1>;
442 #size-cells = <1>;
443 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
450 atmel,mux-mask = <
456 u-boot,dm-pre-reloc;
460 u-boot,dm-pre-reloc;
461 pinctrl_dbgu: dbgu-0 {
469 pinctrl_usart0: usart0-0 {
475 pinctrl_usart0_rts: usart0_rts-0 {
480 pinctrl_usart0_cts: usart0_cts-0 {
485 pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
491 pinctrl_usart0_dcd: usart0_dcd-0 {
496 pinctrl_usart0_ri: usart0_ri-0 {
503 pinctrl_usart1: usart1-0 {
509 pinctrl_usart1_rts: usart1_rts-0 {
514 pinctrl_usart1_cts: usart1_cts-0 {
521 pinctrl_usart2: usart2-0 {
527 pinctrl_usart2_rts: usart2_rts-0 {
532 pinctrl_usart2_cts: usart2_cts-0 {
539 pinctrl_usart3: usart3-0 {
545 pinctrl_usart3_rts: usart3_rts-0 {
550 pinctrl_usart3_cts: usart3_cts-0 {
557 pinctrl_uart0: uart0-0 {
565 pinctrl_uart1: uart1-0 {
573 pinctrl_nand: nand-0 {
581 pinctrl_macb_rmii: macb_rmii-0 {
595 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
607 pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
621 pinctrl_mmc0_clk: mmc0_clk-0 {
626 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
632 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
639 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
645 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
654 pinctrl_ssc0_tx: ssc0_tx-0 {
661 pinctrl_ssc0_rx: ssc0_rx-0 {
670 pinctrl_spi0: spi0-0 {
679 pinctrl_spi1: spi1-0 {
688 pinctrl_i2c_gpio0: i2c_gpio0-0 {
696 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
700 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
704 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
708 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
712 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
716 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
720 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
724 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
728 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
734 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
738 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
742 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
746 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
750 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
754 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
758 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
762 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
766 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
773 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
776 pinctrl-names = "default";
777 pinctrl-0 = <&pinctrl_dbgu>;
779 clock-names = "usart";
784 compatible = "atmel,at91sam9260-usart";
787 atmel,use-dma-rx;
788 atmel,use-dma-tx;
789 pinctrl-names = "default";
790 pinctrl-0 = <&pinctrl_usart0>;
792 clock-names = "usart";
797 compatible = "atmel,at91sam9260-usart";
800 atmel,use-dma-rx;
801 atmel,use-dma-tx;
802 pinctrl-names = "default";
803 pinctrl-0 = <&pinctrl_usart1>;
805 clock-names = "usart";
810 compatible = "atmel,at91sam9260-usart";
813 atmel,use-dma-rx;
814 atmel,use-dma-tx;
815 pinctrl-names = "default";
816 pinctrl-0 = <&pinctrl_usart2>;
818 clock-names = "usart";
823 compatible = "atmel,at91sam9260-usart";
826 atmel,use-dma-rx;
827 atmel,use-dma-tx;
828 pinctrl-names = "default";
829 pinctrl-0 = <&pinctrl_usart3>;
831 clock-names = "usart";
836 compatible = "atmel,at91sam9260-usart";
839 atmel,use-dma-rx;
840 atmel,use-dma-tx;
841 pinctrl-names = "default";
842 pinctrl-0 = <&pinctrl_uart0>;
844 clock-names = "usart";
849 compatible = "atmel,at91sam9260-usart";
852 atmel,use-dma-rx;
853 atmel,use-dma-tx;
854 pinctrl-names = "default";
855 pinctrl-0 = <&pinctrl_uart1>;
857 clock-names = "usart";
862 compatible = "cdns,at91sam9260-macb", "cdns,macb";
865 pinctrl-names = "default";
866 pinctrl-0 = <&pinctrl_macb_rmii>;
868 clock-names = "hclk", "pclk";
873 compatible = "atmel,at91sam9260-udc";
877 clock-names = "pclk", "hclk";
882 compatible = "atmel,at91sam9260-i2c";
885 #address-cells = <1>;
886 #size-cells = <0>;
895 #address-cells = <1>;
896 #size-cells = <0>;
897 pinctrl-names = "default";
899 clock-names = "mci_clk";
904 compatible = "atmel,at91rm9200-ssc";
907 pinctrl-names = "default";
908 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
910 clock-names = "pclk";
915 #address-cells = <1>;
916 #size-cells = <0>;
917 compatible = "atmel,at91rm9200-spi";
920 pinctrl-names = "default";
921 pinctrl-0 = <&pinctrl_spi0>;
923 clock-names = "spi_clk";
928 #address-cells = <1>;
929 #size-cells = <0>;
930 compatible = "atmel,at91rm9200-spi";
933 pinctrl-names = "default";
934 pinctrl-0 = <&pinctrl_spi1>;
936 clock-names = "spi_clk";
940 adc0: adc@fffe0000 {
941 #address-cells = <1>;
942 #size-cells = <0>;
943 compatible = "atmel,at91sam9260-adc";
947 clock-names = "adc_clk", "adc_op_clk";
948 atmel,adc-use-external-triggers;
949 atmel,adc-channels-used = <0xf>;
950 atmel,adc-vref = <3300>;
951 atmel,adc-startup-time = <15>;
952 atmel,adc-res = <8 10>;
953 atmel,adc-res-names = "lowres", "highres";
954 atmel,adc-use-res = "highres";
958 trigger-name = "timer-counter-0";
959 trigger-value = <0x1>;
963 trigger-name = "timer-counter-1";
964 trigger-value = <0x3>;
969 trigger-name = "timer-counter-2";
970 trigger-value = <0x5>;
975 trigger-name = "external";
976 trigger-value = <0xd>;
977 trigger-external;
982 compatible = "atmel,at91sam9260-rtt";
990 compatible = "atmel,at91sam9260-wdt";
994 atmel,watchdog-type = "hardware";
995 atmel,reset-type = "all";
996 atmel,dbg-halt;
1001 compatible = "atmel,at91sam9260-gpbr", "syscon";
1008 compatible = "atmel,at91rm9200-nand";
1009 #address-cells = <1>;
1010 #size-cells = <1>;
1014 atmel,nand-addr-offset = <21>;
1015 atmel,nand-cmd-offset = <22>;
1016 pinctrl-names = "default";
1017 pinctrl-0 = <&pinctrl_nand>;
1026 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1030 clock-names = "ohci_clk", "hclk", "uhpck";
1036 compatible = "i2c-gpio";
1040 i2c-gpio,sda-open-drain;
1041 i2c-gpio,scl-open-drain;
1042 i2c-gpio,delay-us = <2>; /* ~100 kHz */
1043 #address-cells = <1>;
1044 #size-cells = <0>;
1045 pinctrl-names = "default";
1046 pinctrl-0 = <&pinctrl_i2c_gpio0>;