arm/dts/at91-sama5d3_xplained.dts

2  * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
9 /dts-v1/;
14 	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
17 		u-boot,dm-pre-reloc;
18 		stdout-path = &dbgu;
31 			clock-frequency = <32768>;
35 			clock-frequency = <12000000>;
41 		pinctrl-names = "default";
42 		pinctrl-0 = <&pinctrl_onewire_tm_default>;
53 			mmc0: mmc@f0000000 {
54 				u-boot,dm-pre-reloc;
55 …pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd…
56 				vmmc-supply = <&vcc_mmc0_reg>;
57 				vqmmc-supply = <&vcc_3v3_reg>;
59 				slot@0 {
61 					bus-width = <8>;
62 					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
66 			mmc1: mmc@f8000000 {
67 				u-boot,dm-pre-reloc;
68 				vmmc-supply = <&vcc_3v3_reg>;
69 				vqmmc-supply = <&vcc_3v3_reg>;
71 				slot@0 {
73 					bus-width = <4>;
74 					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
78 			spi0: spi@f0004000 {
79 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
88 				pinctrl-0 = <&pinctrl_i2c0_pu>;
96 					compatible = "active-semi,act8865";
102 							regulator-name = "VCC_1V8";
103 							regulator-min-microvolt = <1800000>;
104 							regulator-max-microvolt = <1800000>;
105 							regulator-always-on;
109 							regulator-name = "VCC_1V2";
110 							regulator-min-microvolt = <1200000>;
111 							regulator-max-microvolt = <1200000>;
112 							regulator-always-on;
116 							regulator-name = "VCC_3V3";
117 							regulator-min-microvolt = <3300000>;
118 							regulator-max-microvolt = <3300000>;
119 							regulator-always-on;
123 							regulator-name = "FUSE_2V5";
124 							regulator-min-microvolt = <2500000>;
125 							regulator-max-microvolt = <2500000>;
129 							regulator-name = "VDDANA";
130 							regulator-min-microvolt = <3300000>;
131 							regulator-max-microvolt = <3300000>;
132 							regulator-always-on;
139 				phy-mode = "rgmii";
140 				#address-cells = <1>;
141 				#size-cells = <0>;
144 				ethernet-phy@7 {
150 				pinctrl-names = "default";
151 				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
160 				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
168 			mmc1: mmc@f8000000 {
169 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
171 				slot@0 {
173 					bus-width = <4>;
174 					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
178 			spi1: spi@f8008000 {
179 				cs-gpios = <&pioC 25 0>;
184 				pinctrl-0 = <
202 				pinctrl-0 = <&pinctrl_i2c2_pu>;
207 				phy-mode = "rmii";
208 				#address-cells = <1>;
209 				#size-cells = <0>;
212 				ethernet-phy@1 {
218 				u-boot,dm-pre-reloc;
224 					u-boot,dm-pre-reloc;
243 						u-boot,dm-pre-reloc;
249 						u-boot,dm-pre-reloc;
268 			nand-bus-width = <8>;
269 			nand-ecc-mode = "hw";
270 			atmel,has-pmecc;
271 			atmel,pmecc-cap = <4>;
272 			atmel,pmecc-sector-size = <512>;
273 			nand-on-flash-bbt;
308 			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
309 			pinctrl-names = "default";
310 			pinctrl-0 = <&pinctrl_usba_vbus>;
315 			num-ports = <3>;
316 			atmel,vbus-gpio = <0
329 		compatible = "regulator-fixed";
331 		regulator-name = "mmc0-card-supply";
332 		regulator-min-microvolt = <3300000>;
333 		regulator-max-microvolt = <3300000>;
334 		regulator-always-on;
338 		compatible = "gpio-keys";
340 		pinctrl-names = "default";
341 		pinctrl-0 = <&pinctrl_key_gpio>;
347 			wakeup-source;
352 		compatible = "gpio-leds";
357 			linux,default-trigger = "heartbeat";