arm/dts/ast2600-pfr.dts

1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /dts-v1/;
4 #include "ast2600-u-boot.dtsi"
8 	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
16 		stdout-path = &uart5;
34 			clock-frequency = <800000000>;
37 			clock-frequency = <800000000>;
43 	u-boot,dm-pre-reloc;
48 	clock-frequency = <400000000>;
65 	pinctrl-names = "default";
66 	pinctrl-0 = <	&pinctrl_mdio1_default &pinctrl_mdio2_default
68 	#address-cells = <1>;
69 	#size-cells = <0>;
70 	ethphy0: ethernet-phy@0 {
74 	ethphy1: ethernet-phy@1 {
78 	ethphy2: ethernet-phy@2 {
82 	ethphy3: ethernet-phy@3 {
89 	phy-mode = "rgmii-rxid";
90 	phy-handle = <&ethphy0>;
91 	pinctrl-names = "default";
92 	pinctrl-0 = <&pinctrl_rgmii1_default>;
97 	phy-mode = "rgmii-rxid";
98 	phy-handle = <&ethphy1>;
99 	pinctrl-names = "default";
100 	pinctrl-0 = <&pinctrl_rgmii2_default>;
105 	phy-mode = "rgmii";
106 	phy-handle = <&ethphy2>;
107 	pinctrl-names = "default";
108 	pinctrl-0 = <&pinctrl_rgmii3_default>;
113 	phy-mode = "rgmii";
114 	phy-handle = <&ethphy3>;
115 	pinctrl-names = "default";
116 	pinctrl-0 = <&pinctrl_rgmii4_default>;
122 	pinctrl-names = "default";
123 	pinctrl-0 = <&pinctrl_fmcquad_default>;
124 	timing-calibration-disabled;
128 		spi-max-frequency = <12500000>;
129 		spi-tx-bus-width = <1>;
130 		spi-rx-bus-width = <1>;
135 		spi-max-frequency = <12500000>;
136 		spi-tx-bus-width = <1>;
137 		spi-rx-bus-width = <1>;
142 		spi-max-frequency = <12500000>;
143 		spi-tx-bus-width = <1>;
144 		spi-rx-bus-width = <1>;
151 	pinctrl-names = "default";
152 	pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
155 	timing-calibration-disabled;
159 		spi-max-frequency = <12500000>;
160 		spi-tx-bus-width = <1>;
161 		spi-rx-bus-width = <1>;
166 		spi-max-frequency = <12500000>;
167 		spi-tx-bus-width = <1>;
168 		spi-rx-bus-width = <1>;
175 	pinctrl-names = "default";
176 	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
178 	timing-calibration-disabled;
182 		spi-max-frequency = <12500000>;
183 		spi-tx-bus-width = <1>;
184 		spi-rx-bus-width = <1>;
189 		spi-max-frequency = <12500000>;
190 		spi-tx-bus-width = <1>;
191 		spi-rx-bus-width = <1>;
196 		spi-max-frequency = <12500000>;
197 		spi-tx-bus-width = <1>;
198 		spi-rx-bus-width = <1>;
203 	u-boot,dm-pre-reloc;
204 	timing-phase = <0x000f0097>;
208 	u-boot,dm-pre-reloc;
210 	bus-width = <4>;
211 	pinctrl-names = "default";
212 	pinctrl-0 = <&pinctrl_emmc_default>;
213 	sdhci-drive-type = <1>;
217 	timing-phase = <0x00c6375f>;
222 	bus-width = <4>;
223 	pwr-gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
224 	pwr-sw-gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
225 	pinctrl-names = "default";
226 	pinctrl-0 = <&pinctrl_sd1_default>;
227 	sdhci-drive-type = <1>;
232 	bus-width = <4>;
233 	pwr-gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
234 	pwr-sw-gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
235 	pinctrl-names = "default";
236 	pinctrl-0 = <&pinctrl_sd2_default>;
237 	sdhci-drive-type = <1>;
243 	pinctrl-names = "default";
244 	pinctrl-0 = <&pinctrl_i2c5_default>;
250 	pinctrl-names = "default";
251 	pinctrl-0 = <&pinctrl_i2c6_default>;
257 	pinctrl-names = "default";
258 	pinctrl-0 = <&pinctrl_i2c7_default>;
264 	pinctrl-names = "default";
265 	pinctrl-0 = <&pinctrl_i2c8_default>;
271 	pinctrl-names = "default";
272 	pinctrl-0 = <&pinctrl_i2c9_default>;
301 	mac0-clk-delay = <0x10 0x0a
304 	mac1-clk-delay = <0x10 0x0a
307 	mac2-clk-delay = <0x08 0x04
310 	mac3-clk-delay = <0x08 0x04
316 	u-boot,dm-pre-reloc;
321 	u-boot,dm-pre-reloc;