Lines Matching +full:pcie +full:- +full:phy1
3 * (DB-88F6820-AMC)
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * This file is dual-licensed: you can use it either under the terms
42 /dts-v1/;
43 #include "armada-385.dtsi"
44 #include <dt-bindings/gpio/gpio.h>
48 compatible = "marvell,a385-amc", "marvell,armada385", "marvell,armada380";
51 stdout-path = "serial0:115200n8";
70 internal-regs {
72 clock-frequency = <100000>;
73 u-boot,i2c-slave-addr = <0x0>;
74 pinctrl-names = "default";
75 pinctrl-0 = <&i2c0_pins>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&uart0_pins>;
88 u-boot,dm-pre-reloc;
93 phy = <&phy1>;
94 phy-mode = "sgmii";
102 pinctrl-names = "default";
107 pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
110 phy-mode = "rgmii-id";
115 pinctrl-names = "default";
116 pinctrl-0 = <&mdio_pins>;
118 phy0: ethernet-phy@1 {
122 phy1: ethernet-phy@0 { label
129 num-cs = <1>;
130 marvell,nand-keep-config;
131 marvell,nand-enable-arbiter;
132 nand-on-flash-bbt;
136 pcie {
138 pcie@1,0 {
148 pinctrl-names = "default";
149 pinctrl-0 = <&spi1_pins>;
151 u-boot,dm-pre-reloc;
153 spi-flash@0 {
154 u-boot,dm-pre-reloc;
155 #address-cells = <1>;
156 #size-cells = <1>;
157 compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
159 spi-max-frequency = <50000000>;
160 m25p,fast-read;
165 clock-frequency = <20000000>;