Lines Matching +full:bitclock +full:- +full:inversion
2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
8 /dts-v1/;
11 #include "am57xx-commercial-grade.dtsi"
12 #include "dra74x-mmc-iodelay.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
17 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
27 stdout-path = &uart3;
35 vdd_3v3: fixedregulator-vdd_3v3 {
36 compatible = "regulator-fixed";
37 regulator-name = "vdd_3v3";
38 vin-supply = <®en1>;
39 regulator-min-microvolt = <3300000>;
40 regulator-max-microvolt = <3300000>;
43 aic_dvdd: fixedregulator-aic_dvdd {
44 compatible = "regulator-fixed";
45 regulator-name = "aic_dvdd_fixed";
46 vin-supply = <&vdd_3v3>;
47 regulator-min-microvolt = <1800000>;
48 regulator-max-microvolt = <1800000>;
51 vtt_fixed: fixedregulator-vtt {
53 compatible = "regulator-fixed";
54 regulator-name = "vtt_fixed";
55 vin-supply = <&smps3_reg>;
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 regulator-always-on;
59 regulator-boot-on;
60 enable-active-high;
65 compatible = "gpio-leds";
68 label = "beagle-x15:usr0";
70 linux,default-trigger = "heartbeat";
71 default-state = "off";
75 label = "beagle-x15:usr1";
77 linux,default-trigger = "cpu0";
78 default-state = "off";
82 label = "beagle-x15:usr2";
84 linux,default-trigger = "mmc0";
85 default-state = "off";
89 label = "beagle-x15:usr3";
91 linux,default-trigger = "disk-activity";
92 default-state = "off";
98 compatible = "gpio-fan";
100 gpio-fan,speed-map = <0 0>,
102 #cooling-cells = <2>;
106 compatible = "hdmi-connector";
113 remote-endpoint = <&tpd12s015_out>;
122 #address-cells = <1>;
123 #size-cells = <0>;
129 remote-endpoint = <&hdmi_out>;
137 remote-endpoint = <&hdmi_connector_in>;
144 compatible = "simple-audio-card";
145 simple-audio-card,name = "BeagleBoard-X15";
146 simple-audio-card,widgets =
149 simple-audio-card,routing =
154 simple-audio-card,format = "dsp_b";
155 simple-audio-card,bitclock-master = <&sound0_master>;
156 simple-audio-card,frame-master = <&sound0_master>;
157 simple-audio-card,bitclock-inversion;
159 simple-audio-card,cpu {
160 sound-dai = <&mcasp3>;
163 sound0_master: simple-audio-card,codec {
164 sound-dai = <&tlv320aic3104>;
172 clock-frequency = <400000>;
177 interrupt-parent = <&gpio1>;
180 #interrupt-cells = <2>;
181 interrupt-controller;
183 ti,system-power-controller;
184 ti,palmas-override-powerhold;
187 compatible = "ti,tps659038-pmic";
192 regulator-name = "smps12";
193 regulator-min-microvolt = < 850000>;
194 regulator-max-microvolt = <1250000>;
195 regulator-always-on;
196 regulator-boot-on;
201 regulator-name = "smps3";
202 regulator-min-microvolt = <1350000>;
203 regulator-max-microvolt = <1350000>;
204 regulator-always-on;
205 regulator-boot-on;
210 regulator-name = "smps45";
211 regulator-min-microvolt = < 850000>;
212 regulator-max-microvolt = <1250000>;
213 regulator-always-on;
214 regulator-boot-on;
219 regulator-name = "smps6";
220 regulator-min-microvolt = <850000>;
221 regulator-max-microvolt = <1150000>;
222 regulator-always-on;
223 regulator-boot-on;
230 regulator-name = "smps8";
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
233 regulator-always-on;
234 regulator-boot-on;
241 regulator-name = "ldo1";
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <3300000>;
244 regulator-boot-on;
245 regulator-always-on;
250 regulator-name = "ldo2";
251 regulator-min-microvolt = <3300000>;
252 regulator-max-microvolt = <3300000>;
253 regulator-always-on;
254 regulator-boot-on;
259 regulator-name = "ldo3";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
268 regulator-name = "ldo4";
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <1800000>;
271 regulator-always-on;
272 regulator-boot-on;
277 regulator-name = "ldo9";
278 regulator-min-microvolt = <1050000>;
279 regulator-max-microvolt = <1050000>;
280 regulator-always-on;
281 regulator-boot-on;
286 regulator-name = "ldoln";
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
289 regulator-always-on;
290 regulator-boot-on;
295 regulator-name = "ldousb";
296 regulator-min-microvolt = <3300000>;
297 regulator-max-microvolt = <3300000>;
298 regulator-boot-on;
303 regulator-name = "regen1";
304 regulator-boot-on;
305 regulator-always-on;
311 compatible = "ti,palmas-rtc";
312 interrupt-parent = <&tps659038>;
314 wakeup-source;
318 compatible = "ti,palmas-pwrbutton";
319 interrupt-parent = <&tps659038>;
321 wakeup-source;
322 ti,palmas-long-press-seconds = <12>;
326 compatible = "ti,palmas-gpio";
327 gpio-controller;
328 #gpio-cells = <2>;
332 compatible = "ti,palmas-usb-vid";
333 ti,enable-vbus-detection;
334 vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
342 interrupt-parent = <&gpio7>;
344 #thermal-sensor-cells = <1>;
348 #sound-dai-cells = <0>;
351 assigned-clocks = <&clkoutmux2_clk_mux>;
352 assigned-clock-parents = <&sys_clk2_dclk_div>;
355 adc-settle-ms = <40>;
357 AVDD-supply = <&vdd_3v3>;
358 IOVDD-supply = <&vdd_3v3>;
359 DRVDD-supply = <&vdd_3v3>;
360 DVDD-supply = <&aic_dvdd>;
371 clock-frequency = <400000>;
376 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
378 interrupt-names = "irq", "wakeup";
380 vcc-supply = <&vdd_3v3>;
381 wakeup-source;
386 ti,no-reset-on-init;
387 ti,no-idle-on-init;
391 cpu0-supply = <&smps12_reg>;
392 voltage-tolerance = <1>;
397 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
402 phy0: ethernet-phy@1 {
406 phy1: ethernet-phy@2 {
417 phy-handle = <&phy0>;
418 phy-mode = "rgmii";
423 phy-handle = <&phy1>;
424 phy-mode = "rgmii";
431 pinctrl-names = "default";
432 pinctrl-0 = <&mmc1_pins_default>;
434 bus-width = <4>;
435 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
441 pinctrl-names = "default";
442 pinctrl-0 = <&mmc2_pins_default>;
444 vmmc-supply = <&vdd_3v3>;
445 bus-width = <8>;
446 ti,non-removable;
447 cap-mmc-dual-data-rate;
455 phy-supply = <&ldousb_reg>;
459 phy-supply = <&ldousb_reg>;
475 * as "host" or "dual-role". If so, provide
493 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
499 polling-delay-passive = <1250>; /* milliseconds */
500 polling-delay = <1500>; /* milliseconds */
503 thermal-sensors = <&tmp102 0>;
519 board_cooling_maps: cooling-maps {
522 cooling-device =
532 vdda_video-supply = <&ldoln_reg>;
537 vdda-supply = <&ldo4_reg>;
541 remote-endpoint = <&tpd12s015_in>;
556 #sound-dai-cells = <0>;
557 assigned-clocks = <&mcasp3_ahclkx_mux>;
558 assigned-clock-parents = <&sys_clkin2>;
561 op-mode = <0>; /* MCASP_IIS_MODE */
562 tdm-slots = <2>;
564 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
567 tx-num-evt = <32>;
568 rx-num-evt = <32>;