Lines Matching +full:op +full:- +full:panel
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
11 /dts-v1/;
14 #include <dt-bindings/pinctrl/am43xx.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
28 stdout-path = &uart0;
29 tick-timer = &timer2;
33 compatible = "pwm-backlight";
35 brightness-levels = <0 51 53 56 62 75 101 152 255>;
36 default-brightness-level = <8>;
40 compatible = "ti,da830-evm-audio";
41 ti,model = "AM437x-SK-EVM";
42 ti,audio-codec = <&tlv320aic3106>;
43 ti,mcasp-controller = <&mcasp1>;
44 ti,codec-clock-rate = <24000000>;
45 ti,audio-routing =
51 compatible = "gpio-matrix-keypad";
53 pinctrl-names = "default";
54 pinctrl-0 = <&matrix_keypad_pins>;
56 debounce-delay-ms = <5>;
57 col-scan-delay-us = <5>;
59 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
62 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
74 compatible = "gpio-leds";
76 pinctrl-names = "default";
77 pinctrl-0 = <&leds_pins>;
80 label = "am437x-sk:red:heartbeat";
82 linux,default-trigger = "heartbeat";
83 default-state = "off";
87 label = "am437x-sk:green:mmc1";
89 linux,default-trigger = "mmc0";
90 default-state = "off";
94 label = "am437x-sk:blue:cpu0";
96 linux,default-trigger = "cpu0";
97 default-state = "off";
101 label = "am437x-sk:blue:usr3";
103 default-state = "off";
108 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
111 pinctrl-names = "default";
112 pinctrl-0 = <&lcd_pins>;
114 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
116 panel-timing {
117 clock-frequency = <9000000>;
120 hfront-porch = <2>;
121 hback-porch = <2>;
122 hsync-len = <41>;
123 vfront-porch = <2>;
124 vback-porch = <2>;
125 vsync-len = <10>;
126 hsync-active = <0>;
127 vsync-active = <0>;
128 de-active = <1>;
129 pixelclk-active = <1>;
134 remote-endpoint = <&dpi_out>;
142 pinctrl-single,pins = <
151 pinctrl-single,pins = <
160 pinctrl-single,pins = <
167 pinctrl-single,pins = <
174 pinctrl-single,pins = <
186 pinctrl-single,pins = <
192 pinctrl-single,pins = <
199 pinctrl-single,pins = <
219 pinctrl-single,pins = <
239 pinctrl-single,pins = <
271 pinctrl-single,pins = <
303 pinctrl-single,pins = <
311 pinctrl-single,pins = <
319 pinctrl-single,pins = <
320 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
327 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
353 pinctrl-single,pins = <
364 pinctrl-single,pins = <
373 pinctrl-single,pins = <
379 pinctrl-single,pins = <
385 pinctrl-single,pins = <
393 pinctrl-names = "default";
394 pinctrl-0 = <&i2c0_pins>;
395 clock-frequency = <400000>;
401 interrupt-controller;
402 #interrupt-cells = <2>;
404 dcdc1: regulator-dcdc1 {
405 compatible = "ti,tps65218-dcdc1";
407 regulator-name = "vdd_core";
408 regulator-min-microvolt = <912000>;
409 regulator-max-microvolt = <1144000>;
410 regulator-boot-on;
411 regulator-always-on;
414 dcdc2: regulator-dcdc2 {
415 compatible = "ti,tps65218-dcdc2";
417 regulator-name = "vdd_mpu";
418 regulator-min-microvolt = <912000>;
419 regulator-max-microvolt = <1378000>;
420 regulator-boot-on;
421 regulator-always-on;
424 dcdc3: regulator-dcdc3 {
425 compatible = "ti,tps65218-dcdc3";
426 regulator-name = "vdds_ddr";
427 regulator-min-microvolt = <1500000>;
428 regulator-max-microvolt = <1500000>;
429 regulator-boot-on;
430 regulator-always-on;
433 dcdc4: regulator-dcdc4 {
434 compatible = "ti,tps65218-dcdc4";
435 regulator-name = "v3_3d";
436 regulator-min-microvolt = <3300000>;
437 regulator-max-microvolt = <3300000>;
438 regulator-boot-on;
439 regulator-always-on;
442 ldo1: regulator-ldo1 {
443 compatible = "ti,tps65218-ldo1";
444 regulator-name = "v1_8d";
445 regulator-min-microvolt = <1800000>;
446 regulator-max-microvolt = <1800000>;
447 regulator-boot-on;
448 regulator-always-on;
451 power-button {
452 compatible = "ti,tps65218-pwrbutton";
467 pinctrl-names = "default";
468 pinctrl-0 = <&i2c1_pins>;
469 clock-frequency = <400000>;
471 edt-ft5306@38 {
473 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
474 pinctrl-names = "default";
475 pinctrl-0 = <&edt_ft5306_ts_pins>;
478 interrupt-parent = <&gpio0>;
481 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
483 touchscreen-size-x = <480>;
484 touchscreen-size-y = <272>;
493 AVDD-supply = <&dcdc4>;
494 IOVDD-supply = <&dcdc4>;
495 DRVDD-supply = <&dcdc4>;
496 DVDD-supply = <&ldo1>;
504 Vdd-supply = <&dcdc4>;
505 Vdd_IO-supply = <&dcdc4>;
506 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
516 pinctrl-names = "default";
517 pinctrl-0 = <&ecap0_pins>;
534 pinctrl-names = "default";
535 pinctrl-0 = <&mmc1_pins>;
537 vmmc-supply = <&dcdc4>;
538 bus-width = <4>;
539 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
549 pinctrl-names = "default";
550 pinctrl-0 = <&usb1_pins>;
560 pinctrl-names = "default";
561 pinctrl-0 = <&usb2_pins>;
566 pinctrl-names = "default";
567 pinctrl-0 = <&qspi_pins>;
569 spi-max-frequency = <48000000>;
571 compatible = "mx66l51235l","spi-flash";
572 spi-max-frequency = <48000000>;
574 spi-cpol;
575 spi-cpha;
576 spi-tx-bus-width = <1>;
577 spi-rx-bus-width = <4>;
578 #address-cells = <1>;
579 #size-cells = <1>;
594 label = "QSPI.U-BOOT-SPL_OS";
602 label = "QSPI.U-BOOT-ENV.backup";
617 pinctrl-names = "default", "sleep";
618 pinctrl-0 = <&cpsw_default>;
619 pinctrl-1 = <&cpsw_sleep>;
625 pinctrl-names = "default", "sleep";
626 pinctrl-0 = <&davinci_mdio_default>;
627 pinctrl-1 = <&davinci_mdio_sleep>;
633 phy-mode = "rgmii";
639 phy-mode = "rgmii";
648 pinctrl-names = "default";
649 pinctrl-0 = <&mcasp1_pins>;
653 op-mode = <0>;
654 tdm-slots = <2>;
655 serial-dir = <
659 tx-num-evt = <1>;
660 rx-num-evt = <1>;
666 pinctrl-names = "default";
667 pinctrl-0 = <&dss_pins>;
671 remote-endpoint = <&lcd_in>;
672 data-lines = <24>;
686 cpu0-supply = <&dcdc2>;
691 pinctrl-names = "default", "sleep";
692 pinctrl-0 = <&vpfe0_pins_default>;
693 pinctrl-1 = <&vpfe0_pins_sleep>;
698 /* remote-endpoint = <&sensor>; add once we have it */
699 ti,am437x-vpfe-interface = <0>;
700 bus-width = <8>;
701 hsync-active = <0>;
702 vsync-active = <0>;