arm/dts/am335x-pxm2.dtsi

6  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
14 #include <dt-bindings/input/input.h>
18 		stdout-path = &uart0;
19 		tick-timer = &timer2;
24 			cpu0-supply = <&vdd1_reg>;
29 		compatible = "pwm-backlight";
31 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
40 		default-brightness-level = <80>;
41 		power-supply = <&backlight_reg>;
42 		enable-gpios = <&gpio3 16 0>;
46 		compatible = "regulator-fixed";
47 		regulator-name = "backlight_reg";
48 		regulator-boot-on;
51 	gpio_keys: restart-keys {
52 		compatible = "gpio-keys";
59 			gpio-key,wakeup;
64 		compatible = "gpio-leds";
86 		compatible = "regulator-gpio";
87                 regulator-name = "lcd-3v3";
88 		regulator-min-microvolt = <1800000>;
89                 regulator-max-microvolt = <3300000>;
90 		regulator-type = "voltage";
91 		startup-delay-us = <100>;
94 		enable-at-boot;
96                 enable-active-high;
100 		compatible = "regulator-fixed";
101 		regulator-name = "vbat";
102 		regulator-min-microvolt = <5000000>;
103 		regulator-max-microvolt = <5000000>;
104 		regulator-boot-on;
108 		compatible = "regulator-fixed";
109 		regulator-name = "vmmc";
110 		regulator-min-microvolt = <3300000>;
111 		regulator-max-microvolt = <3300000>;
121 	phy-mode = "rgmii-txid";
126 	phy-mode = "rgmii-txid";
130 	pinctrl-names = "default", "sleep";
131 	pinctrl-0 = <&davinci_mdio_default>;
132 	pinctrl-1 = <&davinci_mdio_sleep>;
145 		pinctrl-names = "default";
146 		pinctrl-0 = <&ecap0_pins>;
151 	pinctrl-names = "default";
152 	pinctrl-0 = <&nandflash_pins>;
159 		nand-bus-width = <8>;
160 		ti,nand-ecc-opt = "bch8";
161 		gpmc,device-nand = "true";
162 		gpmc,device-width = <1>;
163 		gpmc,sync-clk-ps = <0>;
164 		gpmc,cs-on-ns = <0>;
165 		gpmc,cs-rd-off-ns = <44>;
166 		gpmc,cs-wr-off-ns = <44>;
167 		gpmc,adv-on-ns = <6>;
168 		gpmc,adv-rd-off-ns = <34>;
169 		gpmc,adv-wr-off-ns = <44>;
170 		gpmc,we-on-ns = <0>;
171 		gpmc,we-off-ns = <40>;
172 		gpmc,oe-on-ns = <0>;
173 		gpmc,oe-off-ns = <54>;
174 		gpmc,access-ns = <64>;
175 		gpmc,rd-cycle-ns = <82>;
176 		gpmc,wr-cycle-ns = <82>;
177 		gpmc,wait-on-read = "true";
178 		gpmc,wait-on-write = "true";
179 		gpmc,bus-turnaround-ns = <0>;
180 		gpmc,cycle2cycle-delay-ns = <0>;
181 		gpmc,clk-activation-ns = <0>;
182 		gpmc,wait-monitoring-ns = <0>;
183 		gpmc,wr-access-ns = <40>;
184 		gpmc,wr-data-mux-bus-ns = <0>;
186 		#address-cells = <1>;
187 		#size-cells = <1>;
193 	pinctrl-names = "default";
194 	pinctrl-0 = <&i2c0_pins>;
195 	clock-frequency = <400000>;
209 	pinctrl-names = "default";
210 	pinctrl-0 = <&i2c1_pins>;
211 	clock-frequency = <100000>;
221 	pinctrl-names = "default";
222 	pinctrl-0 = <&i2c2_pins>;
223 	clock-frequency = <100000>;
229 		interrupt-parent = <&gpio1>;
231 		wakeup-gpios = <&gpio1 25 0>;
240 	pinctrl-names = "default", "sleep";
241 	pinctrl-0 = <&cpsw_default>;
242 	pinctrl-1 = <&cpsw_sleep>;
247 	vmmc-supply = <&vmmc>;
248 	bus-width = <4>;
249 	cd-gpios = <&gpio0 6 0>;
250 	wp-gpios = <&gpio3 18 0>;
255 	rgmii-no-delay;
261 	vcc1-supply = <&vbat>;
262 	vcc2-supply = <&vbat>;
263 	vcc3-supply = <&vbat>;
264 	vcc4-supply = <&vbat>;
265 	vcc5-supply = <&vbat>;
266 	vcc6-supply = <&vbat>;
267 	vcc7-supply = <&vbat>;
268 	vccio-supply = <&vbat>;
272 			regulator-always-on;
276 			regulator-always-on;
280 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
281 			regulator-name = "vdd_mpu";
282 			regulator-min-microvolt = <912500>;
283 			regulator-max-microvolt = <1312500>;
284 			regulator-boot-on;
285 			regulator-always-on;
289 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
290 			regulator-name = "vdd_core";
291 			regulator-min-microvolt = <912500>;
292 			regulator-max-microvolt = <1150000>;
293 			regulator-boot-on;
294 			regulator-always-on;
298 			regulator-always-on;
302 			regulator-always-on;
306 			regulator-always-on;
310 			regulator-always-on;
314 			regulator-always-on;
318 			regulator-always-on;
322 			regulator-always-on;
326 			regulator-always-on;
330 			regulator-min-microvolt = <1800000>;
331 			regulator-max-microvolt = <3300000>;
332 			regulator-always-on;
338 	pinctrl-names = "default";
339 	pinctrl-0 = <&uart0_pins>;
370 	pinctrl-names = "default";
371 	pinctrl-0 = <&clkout2_pin &gpio_pin>;
374 		pinctrl-single,pins = <
380 		pinctrl-single,pins = <
398 		pinctrl-single,pins = <
416 		pinctrl-single,pins = <
424 		pinctrl-single,pins = <
432 		pinctrl-single,pins = <
440 		pinctrl-single,pins = <
453 		pinctrl-single,pins = <
460 		pinctrl-single,pins = <
467 		pinctrl-single,pins = <
474 		pinctrl-single,pins = <
508 		pinctrl-single,pins = <
528 		pinctrl-single,pins = <
536 	wdt-keep-enabled;