Lines Matching +full:coordinate +full:- +full:readouts
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
14 /dts-v1/;
17 #include <dt-bindings/pwm/pwm.h>
18 #include <dt-bindings/interrupt-controller/irq.h>
21 model = "TI AM335x EVM-SK";
22 compatible = "ti,am335x-evmsk", "ti,am33xx";
25 stdout-path = &uart0;
26 tick-timer = &timer2;
31 cpu0-supply = <&vdd1_reg>;
41 compatible = "regulator-fixed";
42 regulator-name = "vbat";
43 regulator-min-microvolt = <5000000>;
44 regulator-max-microvolt = <5000000>;
45 regulator-boot-on;
49 compatible = "regulator-fixed";
50 regulator-name = "lis3_reg";
51 regulator-boot-on;
55 pinctrl-names = "default";
56 pinctrl-0 = <&wl12xx_gpio>;
57 compatible = "regulator-fixed";
58 regulator-name = "vwl1271";
59 regulator-min-microvolt = <1800000>;
60 regulator-max-microvolt = <1800000>;
62 startup-delay-us = <70000>;
63 enable-active-high;
67 compatible = "regulator-fixed";
68 regulator-name = "vtt";
69 regulator-min-microvolt = <1500000>;
70 regulator-max-microvolt = <1500000>;
72 regulator-always-on;
73 regulator-boot-on;
74 enable-active-high;
78 pinctrl-names = "default";
79 pinctrl-0 = <&user_leds_s0>;
81 compatible = "gpio-leds";
86 default-state = "off";
92 default-state = "off";
98 linux,default-trigger = "mmc0";
99 default-state = "off";
105 linux,default-trigger = "heartbeat";
106 default-state = "off";
111 compatible = "gpio-keys";
129 wakeup-source;
140 compatible = "pwm-backlight";
142 brightness-levels = <0 58 61 66 75 90 125 170 255>;
143 default-brightness-level = <8>;
147 compatible = "simple-audio-card";
148 simple-audio-card,name = "AM335x-EVMSK";
149 simple-audio-card,widgets =
151 simple-audio-card,routing =
154 simple-audio-card,format = "dsp_b";
155 simple-audio-card,bitclock-master = <&sound_master>;
156 simple-audio-card,frame-master = <&sound_master>;
157 simple-audio-card,bitclock-inversion;
159 simple-audio-card,cpu {
160 sound-dai = <&mcasp1>;
163 sound_master: simple-audio-card,codec {
164 sound-dai = <&tlv320aic3106>;
165 system-clock-frequency = <24000000>;
171 pinctrl-names = "default", "sleep";
172 pinctrl-0 = <&lcd_pins_default>;
173 pinctrl-1 = <&lcd_pins_sleep>;
175 panel-info {
176 ac-bias = <255>;
177 ac-bias-intrpt = <0>;
178 dma-burst-sz = <16>;
181 sync-edge = <0>;
182 sync-ctrl = <1>;
183 raster-order = <0>;
184 fifo-th = <0>;
186 display-timings {
190 hback-porch = <43>;
191 hfront-porch = <8>;
192 hsync-len = <4>;
193 vback-porch = <12>;
194 vfront-porch = <4>;
195 vsync-len = <10>;
196 clock-frequency = <9000000>;
197 hsync-active = <0>;
198 vsync-active = <0>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
209 pinctrl-single,pins = <
242 pinctrl-single,pins = <
276 pinctrl-single,pins = <
285 pinctrl-single,pins = <
294 pinctrl-single,pins = <
301 pinctrl-single,pins = <
308 pinctrl-single,pins = <
314 pinctrl-single,pins = <
320 pinctrl-single,pins = <
352 pinctrl-single,pins = <
384 pinctrl-single,pins = <
392 pinctrl-single,pins = <
400 pinctrl-single,pins = <
406 pinctrl-single,pins = <
415 pinctrl-single,pins = <
424 pinctrl-single,pins = <
436 pinctrl-single,pins = <
443 pinctrl-names = "default";
444 pinctrl-0 = <&uart0_pins>;
450 pinctrl-names = "default";
451 pinctrl-0 = <&i2c0_pins>;
454 clock-frequency = <400000>;
463 Vdd-supply = <&lis3_reg>;
464 Vdd_IO-supply = <&lis3_reg>;
466 st,click-single-x;
467 st,click-single-y;
468 st,click-single-z;
469 st,click-thresh-x = <10>;
470 st,click-thresh-y = <10>;
471 st,click-thresh-z = <10>;
472 st,irq1-click;
473 st,irq2-click;
474 st,wakeup-x-lo;
475 st,wakeup-x-hi;
476 st,wakeup-y-lo;
477 st,wakeup-y-hi;
478 st,wakeup-z-lo;
479 st,wakeup-z-hi;
480 st,min-limit-x = <120>;
481 st,min-limit-y = <120>;
482 st,min-limit-z = <140>;
483 st,max-limit-x = <550>;
484 st,max-limit-y = <550>;
485 st,max-limit-z = <750>;
489 #sound-dai-cells = <0>;
495 AVDD-supply = <&vaux2_reg>;
496 IOVDD-supply = <&vaux2_reg>;
497 DRVDD-supply = <&vaux2_reg>;
498 DVDD-supply = <&vbat>;
536 pinctrl-names = "default";
537 pinctrl-0 = <&ecap2_pins>;
544 vcc1-supply = <&vbat>;
545 vcc2-supply = <&vbat>;
546 vcc3-supply = <&vbat>;
547 vcc4-supply = <&vbat>;
548 vcc5-supply = <&vbat>;
549 vcc6-supply = <&vbat>;
550 vcc7-supply = <&vbat>;
551 vccio-supply = <&vbat>;
555 regulator-always-on;
559 regulator-always-on;
563 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
564 regulator-name = "vdd_mpu";
565 regulator-min-microvolt = <912500>;
566 regulator-max-microvolt = <1312500>;
567 regulator-boot-on;
568 regulator-always-on;
572 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
573 regulator-name = "vdd_core";
574 regulator-min-microvolt = <912500>;
575 regulator-max-microvolt = <1150000>;
576 regulator-boot-on;
577 regulator-always-on;
581 regulator-always-on;
585 regulator-always-on;
589 regulator-always-on;
593 regulator-always-on;
597 regulator-always-on;
601 regulator-always-on;
605 regulator-always-on;
609 regulator-always-on;
613 regulator-min-microvolt = <1800000>;
614 regulator-max-microvolt = <3300000>;
615 regulator-always-on;
621 pinctrl-names = "default", "sleep";
622 pinctrl-0 = <&cpsw_default>;
623 pinctrl-1 = <&cpsw_sleep>;
629 pinctrl-names = "default", "sleep";
630 pinctrl-0 = <&davinci_mdio_default>;
631 pinctrl-1 = <&davinci_mdio_sleep>;
637 phy-mode = "rgmii-txid";
643 phy-mode = "rgmii-txid";
649 vmmc-supply = <&vmmc_reg>;
650 bus-width = <4>;
651 pinctrl-names = "default";
652 pinctrl-0 = <&mmc1_pins>;
653 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
665 ti,no-reset-on-init;
670 vmmc-supply = <&wl12xx_vmmc>;
671 ti,non-removable;
672 bus-width = <4>;
673 cap-power-off-card;
674 pinctrl-names = "default";
675 pinctrl-0 = <&mmc2_pins>;
677 #address-cells = <1>;
678 #size-cells = <0>;
682 interrupt-parent = <&gpio0>;
684 ref-clock-frequency = <38400000>;
689 #sound-dai-cells = <0>;
690 pinctrl-names = "default", "sleep";
691 pinctrl-0 = <&mcasp1_pins>;
692 pinctrl-1 = <&mcasp1_pins_sleep>;
696 op-mode = <0>; /* MCASP_IIS_MODE */
697 tdm-slots = <2>;
699 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
702 tx-num-evt = <32>;
703 rx-num-evt = <32>;
710 ti,x-plate-resistance = <200>;
711 ti,coordinate-readouts = <5>;
712 ti,wire-config = <0x00 0x11 0x22 0x33>;