Lines Matching +refs:flash +refs:boot

16 Booting from QSPI requires two images, RCW and u-boot-dtb.bin.
17 The difference between QSPI boot RCW image and NOR boot image is the PBI
18 command sequence for setting the boot location pointer. It's should point
19 to the address for u-boot in QSPI flash.
21 RCW image should be written to the beginning of QSPI flash device.
22 Example of using u-boot command
31 To get the QSPI image, build u-boot with QSPI config, for example,
32 <board_name>_qspi_defconfig. The image needed is u-boot-dtb.bin.
33 The u-boot image should be written to 0x10000(but 0x1000 for LS1043A, LS2080A).
37 => sf erase 10000 +<size of u-boot image>
39 => sf write <u-boot image in memory> 10000 <size of u-boot image>
42 With these two images in QSPI flash device, the board can boot from QSPI.