Lines Matching refs:SD
125 from the location where it is stored(NOR, NAND, SD, SATA, USB)during
151 devices like SATA, USB, NAND, SD etc.
206 Booting from SD/eMMC
208 Booting from SD/eMMC requires two images, RCW and u-boot-with-spl.bin.
209 The difference between SD boot RCW image and QSPI-NOR boot image is the
211 and QDS which uses SD device with block size 512. Block location can be
217 This command copies u-boot image from SD device into OCRAM. The values
218 need to adjust accordingly for SD/eMMC
222 depending upon SD or eMMC.
223 SRC_ADDR is the offset of u-boot-with-spl.bin image in SD device.
234 RCW image should be written at 8th block of device(SD/eMMC). Example of
240 To form the SD-Boot image, build u-boot with SD config, for example,
248 With these two images in SD/eMMC device, the board can boot from SD/eMMC.