Lines Matching full:dpl
54 | MC DPL Blob |
81 | MC DPL Blob (1M) | |
103 | MC DPL Blob (1M) | |
124 mcinitcmd: This environment variable is defined to initiate MC and DPL deployment
127 will be null and MC will not be booted and DPL will not be applied
128 during U-boot booting.However the MC, DPC and DPL can be applied from
133 using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
143 setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000'
146 MC binary, DPC binary and DPL binary are stored and 0x580300000, 0x580800000
148 …noted that these addresses in 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x58070000…
325 (MC). These commands are used to start mc, aiop and apply DPL
328 Please note Management complex Firmware(MC), DPL and DPC are no
333 b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
342 Assumption: MC firmware, DPL and DPC dtb is already programmed
351 b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
356 Assumption: MC firmware, DPL and DPC dtb is already programmed
362 => fsl_mc apply dpl 580700000
368 c) fsl_mc apply DPL <DPL_addr> - Apply DPL file
370 Please note actual AIOP start will happen during DPL parsing of
374 Assumption: MC firmware, DPL, DPC dtb and AIOP firmware is already
380 => fsl_mc apply dpl 580700000