Lines Matching +full:- +full:- +full:disable +full:- +full:spice
14 "-h or -help display this help and exit\n", QEMU_ARCH_ALL)
16 ``-h``
21 "-version display version information and exit\n", QEMU_ARCH_ALL)
23 ``-version``
28 "-machine [type=]name[,prop[=value][,...]]\n"
29 " selects emulated machine ('-machine help' for list)\n"
33 " dump-guest-core=on|off include guest memory in a core dump (default=on)\n"
34 " mem-merge=on|off controls memory merge support (default: on)\n"
35 " aes-key-wrap=on|off controls support for AES key wrapping (default=on)\n"
36 " dea-key-wrap=on|off controls support for DEA key wrapping (default=on)\n"
37 " suppress-vmdesc=on|off disables self-describing migration (default=off)\n"
39 " memory-encryption=@var{} memory encryption object to use (default=none)\n"
41 …" memory-backend='backend-id' specifies explicitly provided backend for main RAM (d…
42 …" cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=s…
45 ``-machine [type=]name[,prop=value[,...]]``
46 Select the emulated machine by name. Use ``-machine help`` to list
52 "pc-i440fx-2.8" and "pc-q35-2.8" for the x86\_64/i686 architectures.
55 version 2.9.0, the 2.9.0 version must support the "pc-i440fx-2.8"
56 and "pc-q35-2.8" machines too. To allow users live migrating VMs to
74 ``dump-guest-core=on|off``
77 ``mem-merge=on|off``
79 supported by the host, de-duplicates identical memory pages
82 ``aes-key-wrap=on|off``
83 Enables or disables AES key wrapping support on s390-ccw hosts.
88 ``dea-key-wrap=on|off``
89 Enables or disables DEA key wrapping support on s390-ccw hosts.
97 ``memory-encryption=``
104 ``memory-backend='id'``
105 An alternative to legacy ``-mem-path`` and ``mem-prealloc`` options.
111 -object memory-backend-file,id=pc.ram,size=512M,mem-path=/hugetlbfs,prealloc=on,share=on
112 -machine memory-backend=pc.ram
113 -m 512M
117 * as backend id one shall use value of 'default-ram-id', advertised by
118 machine type (available via ``query-machines`` QMP command), if migration
121 use ``x-use-canonical-path-for-ramblock-id=off`` backend option
127 -object memory-backend-ram,id=pc.ram,size=512M,x-use-canonical-path-for-ramblock-id=off
128 -machine memory-backend=pc.ram
129 -m 512M
131 …``cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.…
139 configure the downstream Host-managed Device Memory (HDM) decoders
144 which may be identified by the id provided in the -device entry.
153 ``interleave-granularity=granularity`` sets the granularity of
161 …-machine cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=128G,cxl-fmw.0.interle…
165 " sgx-epc.0.memdev=memid,sgx-epc.0.node=numaid\n",
169 ``sgx-epc.0.memdev=@var{memid},sgx-epc.0.node=@var{numaid}``
174 "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL)
176 ``-cpu model``
177 Select CPU model (``-cpu help`` for list and additional feature
182 "-accel [accel=]accelerator[,prop[=value][,...]]\n"
184 …" igd-passthru=on|off (enable Xen integrated Intel graphics passthrough, default=of…
185 … " kernel-irqchip=on|off|split controls accelerated irqchip support (default=on)\n"
186 " kvm-shadow-mem=size of KVM shadow MMU in bytes\n"
187 " one-insn-per-tb=on|off (one guest instruction per TCG translation block)\n"
188 " split-wx=on|off (enable TCG split w^x mapping)\n"
189 " tb-size=n (TCG translation block cache size)\n"
190 " dirty-ring-size=n (KVM dirty ring GFN count, default 0)\n"
191 …" eager-split-size=n (KVM Eager Page Split chunk size, default 0, disabled. ARM onl…
192 …" notify-vmexit=run|internal-error|disable,notify-window=n (enable notify VM exit a…
193 " thread=single|multi (enable multi-threaded TCG)\n"
196 ``-accel name[,prop=value[,...]]``
203 ``igd-passthru=on|off``
208 ``kernel-irqchip=on|off|split``
209 Controls KVM in-kernel irqchip support. The default is full
212 non-MSI interrupts. Disabling the in-kernel irqchip completely
215 ``kvm-shadow-mem=size``
218 ``one-insn-per-tb=on|off``
222 the logs produced by the ``-d`` option.
224 ``split-wx=on|off``
230 ``tb-size=n``
234 Controls number of TCG threads. When the TCG is multi-threaded
236 additional host cores. The default is to enable multi-threading
237 where both the back-end and front-ends support it and no
241 ``dirty-ring-size=n``
242 When the KVM accelerator is used, it controls the size of the per-vCPU
247 Set this value to 0 to disable the feature. By default, this feature
248 is disabled (dirty-ring-size=0). When enabled, KVM will instead
251 ``eager-split-size=n``
253 enabling dirty-logging on a huge-page requires breaking it into
255 lazily by default. There are performance benefits in doing huge-page
257 with break-before-make sequences are considerable and also if guest
263 (eager-split-size=0).
265 ``notify-vmexit=run|internal-error|disable,notify-window=n``
269 if the exit happens. ``internal-error`` option enables the feature.
270 It raises a internal error. ``disable`` option doesn't enable the feature.
272 open up for a specified of time (i.e. notify-window).
273 Default: notify-vmexit=run,notify-window=0.
283 "-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets]\n"
300 " three-level CPU hierarchy of sockets/cores/threads, the parameters will\n"
306 " can be defined through the supported sub-option. Unsupported parameters\n"
307 " can also be provided in addition to the sub-option, but their values\n"
311 ``-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets][,dies=dies][,…
330 be defined through the supported sub-option. Unsupported parameters can
331 also be provided in addition to the sub-option, but their values must be
339 For example, the following sub-option defines a CPU topology hierarchy
347 -smp 8,sockets=2,cores=2,threads=2,maxcpus=8
349 The following sub-option defines a CPU topology hierarchy (2 sockets
357 -smp 32,sockets=2,dies=2,modules=2,cores=2,threads=2,maxcpus=32
359 The following sub-option defines a CPU topology hierarchy (2 sockets
367 -smp 16,sockets=2,clusters=2,cores=2,threads=2,maxcpus=16
380 -smp 2
383 to guest if it's explicitly specified in -smp.
387 "-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n"
388 "-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=node]\n"
389 "-numa dist,src=source,dst=destination,val=distance\n"
390 "-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]\n"
391 …"-numa hmat-lb,initiator=node,target=node,hierarchy=memory|first-level|second-level|third-level,da…
392 …"-numa hmat-cache,node-id=node,size=size,level=level[,associativity=none|direct|complex][,policy=n…
395 ``-numa node[,mem=size][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=initiator]``
397 ``-numa node[,memdev=id][,cpus=firstcpu[-lastcpu]][,nodeid=node][,initiator=initiator]``
399 ``-numa dist,src=source,dst=destination,val=distance``
401 ``-numa cpu,node-id=node[,socket-id=x][,core-id=y][,thread-id=z]``
403 ``-numa hmat-lb,initiator=node,target=node,hierarchy=hierarchy,data-type=type[,latency=lat][,bandwi…
405 ``-numa hmat-cache,node-id=node,size=size,level=level[,associativity=str][,policy=str][,line=size]``
413 omitted). A non-contiguous set of VCPUs can be represented by
422 -numa node,cpus=0-2,cpus=5
425 which uses '\ ``socket-id|core-id|thread-id``\ ' properties to
429 '\ ``hotpluggable-cpus``\ ' monitor command. '\ ``node-id``\ '
438 -M pc \
439 -smp 1,sockets=2,maxcpus=2 \
440 -numa node,nodeid=0 -numa node,nodeid=1 \
441 -numa cpu,node-id=0,socket-id=0 -numa cpu,node-id=1,socket-id=1
448 '\ ``-memory-backend-ram``\ ' allows memory preallocation).
458 for '\ ``-numa node``\ ' without memory specified was removed.
472 -machine hmat=on \
473 -m 2G,slots=2,maxmem=4G \
474 -object memory-backend-ram,size=1G,id=m0 \
475 -object memory-backend-ram,size=1G,id=m1 \
476 -numa node,nodeid=0,memdev=m0 \
477 -numa node,nodeid=1,memdev=m1,initiator=0 \
478 -smp 2,sockets=2,maxcpus=2 \
479 -numa cpu,node-id=0,socket-id=0 \
480 -numa cpu,node-id=0,socket-id=1
493 Note that the -``numa`` option doesn't allocate any of the specified
495 means that one still has to use the ``-m``, ``-smp`` options to
498 Use '\ ``hmat-lb``\ ' to set System Locality Latency and Bandwidth
504 In '\ ``hmat-lb``\ ' option, node are NUMA node IDs. hierarchy is
507 hierarchy is 'first-level\|second-level\|third-level', this
509 for each domain. type of 'data-type' is type of data represented by
510 this structure instance: if 'hierarchy' is 'memory', 'data-type' is
513 'first-level\|second-level\|third-level', 'data-type' is
523 In '\ ``hmat-cache``\ ' option, node-id is the NUMA-id of the memory
526 level 0 should not be used with '\ ``hmat-cache``\ ' option.
528 'none/direct(direct-mapped)/complex(complex cache indexing)'. policy
533 access memory in node 0 with access-latency 5 nanoseconds,
534 access-bandwidth is 200 MB/s; The processors in NUMA node 0 access
535 memory in NUMA node 1 with access-latency 10 nanoseconds,
536 access-bandwidth is 100 MB/s. And for memory side cache information,
538 policy is write-back, the cache Line size is 8 bytes:
542 -machine hmat=on \
543 -m 2G \
544 -object memory-backend-ram,size=1G,id=m0 \
545 -object memory-backend-ram,size=1G,id=m1 \
546 -smp 2,sockets=2,maxcpus=2 \
547 -numa node,nodeid=0,memdev=m0 \
548 -numa node,nodeid=1,memdev=m1,initiator=0 \
549 -numa cpu,node-id=0,socket-id=0 \
550 -numa cpu,node-id=0,socket-id=1 \
551 -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=5 \
552 … -numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=200M \
553 -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,latency=10 \
554 … -numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=100M \
555 -numa hmat-cache,node-id=0,size=10K,level=1,associativity=direct,policy=write-back,line=8 \
556 -numa hmat-cache,node-id=1,size=10K,level=1,associativity=direct,policy=write-back,line=8
559 DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd,
560 "-add-fd fd=fd,set=set[,opaque=opaque]\n"
563 ``-add-fd fd=fd,set=set[,opaque=opaque]``
576 This option defines a free-form string that can be used to
579 You can open an image using pre-opened file descriptors from an fd
582 .. parsed-literal::
585 -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
586 -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
587 -drive file=/dev/fdset/2,index=0,media=disk
591 "-set group.id.arg=value\n"
593 " i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL)
595 ``-set group.id.arg=value``
600 "-global driver.property=value\n"
601 "-global driver=driver,property=property,value=value\n"
605 ``-global driver.prop=value``
607 ``-global driver=driver,property=property,value=value``
610 .. parsed-literal::
612 |qemu_system_x86| -global ide-hd.physical_block_size=4096 disk-image.img
617 use -``device``.
619 -global driver.prop=value is shorthand for -global
625 "-boot [order=drives][,once=drives][,menu=on|off]\n"
626 " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]\n"
627 " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n"
633 ``-boot [order=drives][,once=drives][,menu=on|off][,splash=sp_name][,splash-time=sp_time][,reboot-t…
636 (floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p
637 (Etherboot from network adapter 1-4), hard disk boot is the default.
645 as firmware/BIOS supports them. The default is non-interactive boot.
656 ms when boot failed, then reboot. If rb\_timeout is '-1', guest will
657 not reboot, qemu passes '-1' to bios by default. Currently Seabios
662 options. The default is non-strict boot.
664 .. parsed-literal::
667 |qemu_system_x86| -boot order=nc
668 # boot from CD-ROM first, switch back to default order after reboot
669 |qemu_system_x86| -boot once=d
671 |qemu_system_x86| -boot menu=on,splash=/root/boot.bmp,splash-time=5000
673 Note: The legacy format '-boot drives' is still supported but its
678 "-m [size=]megs[,slots=n,maxmem=size]\n"
686 ``-m [size=]megs[,slots=n,maxmem=size]``
693 For example, the following command-line sets the guest startup RAM
697 .. parsed-literal::
699 |qemu_system| -m 1G,slots=3,maxmem=4G
705 DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath,
706 "-mem-path FILE provide backing storage for guest RAM\n", QEMU_ARCH_ALL)
708 ``-mem-path path``
712 DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc,
713 "-mem-prealloc preallocate guest memory (use with -mem-path)\n",
716 ``-mem-prealloc``
717 Preallocate memory when using -mem-path.
721 "-k language use keyboard layout (for example 'fr' for French)\n",
724 ``-k language``
735 ar de-ch es fo fr-ca hu ja mk no pt-br sv
736 da en-gb et fr fr-ch is lt nl pl ru th
737 de en-us fi fr-be hr it lv nl-be pt sl tr
739 The default is ``en-us``.
744 "-audio [driver=]driver[,prop[=value][,...]]\n"
747 " options are the same as for -audiodev\n"
748 "-audio [driver=]driver,model=value[,prop[=value][,...]]\n"
750 " apart from 'model', options are the same as for -audiodev.\n"
751 " use '-audio model=help' to show possible devices.\n",
754 ``-audio [driver=]driver[,model=value][,prop[=value][,...]]``
755 If the ``model`` option is specified, ``-audio`` is a shortcut
761 The following two example do exactly the same, to show how ``-audio``
764 .. parsed-literal::
766 |qemu_system| -audiodev pa,id=pa -device sb16,audiodev=pa
767 |qemu_system| -audio pa,model=sb16
769 If the ``model`` option is not specified, ``-audio`` is used to
772 particular, ``-audio none`` ensures that no audio is produced even
776 ``-audiodev`` option below. Use ``driver=help`` to list the available
782 "-audiodev [driver=]driver,id=id[,prop[=value][,...]]\n"
784 " Use ``-audiodev help`` to list the available drivers\n"
786 " timer-period= timer period in microseconds\n"
787 " in|out.mixing-engine= use mixing engine to mix streams inside QEMU\n"
788 " in|out.fixed-settings= use fixed settings for host audio\n"
794 " in|out.buffer-length= length of buffer in microseconds\n"
795 "-audiodev none,id=id,[,prop[=value][,...]]\n"
798 "-audiodev alsa,id=id[,prop[=value][,...]]\n"
800 " in|out.period-length= length of period in microseconds\n"
801 " in|out.try-poll= attempt to use poll mode\n"
805 "-audiodev coreaudio,id=id[,prop[=value][,...]]\n"
806 " in|out.buffer-count= number of buffers\n"
809 "-audiodev dsound,id=id[,prop[=value][,...]]\n"
813 "-audiodev oss,id=id[,prop[=value][,...]]\n"
815 " in|out.buffer-count= number of buffers\n"
816 " in|out.try-poll= attempt to use poll mode\n"
817 " try-mmap= try using memory mapped access\n"
819 " dsp-policy= set timing policy (0..10), -1 to use fragment mode\n"
822 "-audiodev pa,id=id[,prop[=value][,...]]\n"
828 "-audiodev pipewire,id=id[,prop[=value][,...]]\n"
830 " in|out.stream-name= name of pipewire stream\n"
834 "-audiodev sdl,id=id[,prop[=value][,...]]\n"
835 " in|out.buffer-count= number of buffers\n"
838 "-audiodev sndio,id=id[,prop[=value][,...]]\n"
841 "-audiodev spice,id=id[,prop[=value][,...]]\n"
844 "-audiodev dbus,id=id[,prop[=value][,...]]\n"
846 "-audiodev wav,id=id[,prop[=value][,...]]\n"
850 ``-audiodev [driver=]driver,id=id[,prop[=value][,...]]``
859 -audiodev alsa,id=example,in.frequency=44110,out.frequency=8000
860 -audiodev alsa,id=example,out.channels=1 # leaves in.channels unspecified
871 ``timer-period=period``
875 ``in|out.mixing-engine=on|off``
878 off, fixed-settings must be off too. Note that disabling this
881 otherwise you'll get no sound. It's not recommended to disable
885 ``in|out.fixed-settings=on|off``
891 Specify the frequency to use when using fixed-settings. Default
895 Specify the number of channels to use when using fixed-settings.
899 Specify the sample format to use when using fixed-settings.
906 ``in|out.buffer-length=usecs``
909 ``-audiodev none,id=id[,prop[=value][,...]]``
913 ``-audiodev alsa,id=id[,prop[=value][,...]]``
923 ``in|out.period-length=usecs``
926 ``in|out.try-poll=on|off``
932 ``-audiodev coreaudio,id=id[,prop[=value][,...]]``
938 ``in|out.buffer-count=count``
941 ``-audiodev dsound,id=id[,prop[=value][,...]]``
951 ``-audiodev oss,id=id[,prop[=value][,...]]``
953 Unix-like systems.
961 ``in|out.buffer-count=count``
964 ``in|out.try-poll=on|of``
967 ``try-mmap=on|off``
974 ``dsp-policy=policy``
976 means smaller latency but higher CPU usage). Use -1 to use
977 buffer sizes specified by ``buffer`` and ``buffer-count``. This
980 ``-audiodev pa,id=id[,prop[=value][,...]]``
996 ``-audiodev pipewire,id=id[,prop[=value][,...]]``
1008 ``in|out.stream-name``
1011 ``-audiodev sdl,id=id[,prop[=value][,...]]``
1018 ``in|out.buffer-count=count``
1021 ``-audiodev sndio,id=id[,prop[=value][,...]]``
1023 OpenBSD and most other Unix-like systems.
1034 ``-audiodev spice,id=id[,prop[=value][,...]]``
1035 Creates a backend that sends audio through SPICE. This backend
1036 requires ``-spice`` and automatically selected in that case, so
1040 ``-audiodev wav,id=id[,prop[=value][,...]]``
1051 "-device driver[,prop[=value][,...]]\n"
1054 " use '-device help' to print all possible drivers\n"
1055 " use '-device driver,help' to print all possible properties\n",
1058 ``-device driver[,prop[=value][,...]]``
1061 properties, use ``-device help`` and ``-device driver,help``.
1065 ``-device ipmi-bmc-sim,id=id[,prop[=value][,...]]``
1099 ``-device ipmi-bmc-extern,id=id,chardev=id[,slave_addr=val]``
1105 it is strongly recommended that you use the "reconnect-ms=" chardev
1116 ``-device isa-ipmi-kcs,bmc=id[,ioport=val][,irq=val]``
1121 The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern
1129 Define the interrupt to use. The default is 5. To disable
1132 ``-device isa-ipmi-bt,bmc=id[,ioport=val][,irq=val]``
1136 ``-device pci-ipmi-kcs,bmc=id``
1140 The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above.
1142 ``-device pci-ipmi-bt,bmc=id``
1145 ``-device intel-iommu[,option=...]``
1146 This is only supported by ``-machine q35``, which will enable Intel VT-d
1151 complete x2apic. Currently it only supports kvm kernel-irqchip modes
1152 ``off`` or ``split``, while full kernel-irqchip is not yet supported.
1154 kernel-irqchip.
1156 ``caching-mode=on|off`` (default: off)
1157 This enables caching mode for the VT-d emulated device. When
1158 caching-mode is enabled, each guest DMA buffer mapping will generate an
1160 a synchronous way. It is required for ``-device vfio-pci`` to work
1161 with the VT-d device, because host assigned devices requires to setup
1164 ``device-iotlb=on|off`` (default: off)
1165 This enables device-iotlb capability for the emulated VT-d device. So
1169 ``aw-bits=39|48`` (default: 39)
1171 space has 39 bits width for 3-level IOMMU page tables, and 48 bits for
1172 4-level IOMMU page tables.
1174 Please also refer to the wiki page for general scenarios of VT-d
1175 emulation in QEMU: https://wiki.qemu.org/Features/VT-d.
1177 ``-device virtio-iommu-pci[,option=...]``
1178 This is only supported by ``-machine q35`` (x86_64) and ``-machine virt`` (ARM).
1183 virtio-iommu. If host, the granule matches the host page size.
1185 ``aw-bits=val`` (val between 32 and 64, default depends on machine)
1191 "-name string1[,process=string2][,debug-threads=on|off]\n"
1194 " When debug-threads is enabled, individual threads are given a separate name\n"
1198 ``-name name``
1206 "-uuid %08x-%04x-%04x-%04x-%012x\n"
1209 ``-uuid uuid``
1224 ``-device`` to specify the hardware device and ``-blockdev`` to
1230 The ``-drive`` option combines the device and backend into a single
1235 Older options like ``-hda`` are essentially macros which expand into
1236 ``-drive`` options for various drive interfaces. The original forms
1243 "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
1246 ``-fda file``
1248 ``-fdb file``
1254 "-hda/-hdb file use 'file' as hard disk 0/1 image\n", QEMU_ARCH_ALL)
1257 "-hdc/-hdd file use 'file' as hard disk 2/3 image\n", QEMU_ARCH_ALL)
1260 ``-hda file``
1262 ``-hdb file``
1264 ``-hdc file``
1266 ``-hdd file``
1275 "-cdrom file use 'file' as CD-ROM image\n",
1278 ``-cdrom file``
1279 Use file as CD-ROM image on the default bus of the emulated machine
1280 (which is IDE1 master on x86, so you cannot use ``-hdc`` and ``-cdrom``
1282 host CD-ROM by using ``/dev/cdrom`` as filename.
1286 "-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]\n"
1287 " [,cache.direct=on|off][,cache.no-flush=on|off]\n"
1288 " [,read-only=on|off][,auto-read-only=on|off]\n"
1289 " [,force-share=on|off][,detect-zeroes=on|off|unmap]\n"
1293 ``-blockdev option[,option[,option[,...]]]``
1301 existing node (file=node-name), or you define a new node inline,
1305 A block driver node created with ``-blockdev`` can be used for a
1307 in a ``-device`` argument that defines a block device.
1313 ``node-name``
1317 (if you use ``-drive`` as well) the ID of a drive.
1324 ``read-only``
1325 Open the node read-only. Guest write attempts will fail.
1327 Note that some block drivers support only read-only access,
1329 the default value ``read-only=off`` does not work and the
1332 ``auto-read-only``
1333 If ``auto-read-only=on`` is set, QEMU may fall back to
1334 read-only usage even when ``read-only=off`` is requested, or
1339 ``force-share``
1348 Enabling ``force-share=on`` requires ``read-only=on``.
1355 ``cache.no-flush``
1357 failures, you can use ``cache.no-flush=on``. This option
1370 ``detect-zeroes=detect-zeroes``
1371 detect-zeroes is "off", "on" or "unmap" and enables the
1377 ``Driver-specific options for file``
1378 This is the protocol-level block driver for accessing regular
1398 -blockdev driver=file,node-name=disk,filename=disk.img
1400 ``Driver-specific options for raw``
1413 -blockdev driver=file,node-name=disk_file,filename=disk.img
1414 -blockdev driver=raw,node-name=disk,file=disk_file
1420 -blockdev driver=raw,node-name=disk,file.driver=file,file.filename=disk.img
1422 ``Driver-specific options for qcow2``
1434 pass ``null`` here in order to disable the default backing
1437 ``lazy-refcounts``
1441 ``cache-size``
1443 caches in bytes (default: the sum of l2-cache-size and
1444 refcount-cache-size)
1446 ``l2-cache-size``
1448 cache-size is not specified - 32M on Linux platforms, and 8M
1449 on non-Linux platforms; otherwise, as large as possible
1450 within the cache-size, while permitting the requested or the
1453 ``refcount-cache-size``
1455 (default: 4 times the cluster size; or if cache-size is
1459 ``cache-clean-interval``
1465 ``pass-discard-request``
1470 ``pass-discard-snapshot``
1475 ``pass-discard-other``
1480 ``discard-no-unref``
1485 setting of the pass-discard-request option. Keeping the clusters
1487 caused by freeing and re-allocating them later. Besides potential
1496 ``overlap-check``
1500 ``blockdev-add``.
1506 -blockdev driver=file,node-name=my_file,filename=/tmp/disk.qcow2
1507 -blockdev driver=qcow2,node-name=hda,file=my_file,overlap-check=none,cache-size=16777216
1513 …-blockdev driver=qcow2,node-name=disk,file.driver=http,file.filename=http://example.com/image.qcow2
1515 ``Driver-specific options for other drivers``
1516 Please refer to the QAPI documentation of the ``blockdev-add``
1521 "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
1526 " [,readonly=on|off][,copy-on-read=on|off]\n"
1527 " [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]\n"
1536 ``-drive option[,option[,option[,...]]]``
1539 defining the corresponding ``-blockdev`` and ``-device`` options.
1541 ``-drive`` accepts all options that are accepted by ``-blockdev``.
1573 given drive (see ``-snapshot``).
1579 and ``cache.no-flush`` options (as in ``-blockdev``), and
1581 the ``write-cache`` option of block guest devices (as in
1582 ``-device``). The modes correspond to the following settings:
1585 \ cache.writeback cache.direct cache.no-flush
1613 ``copy-on-read=copy-on-read``
1614 copy-on-read is "on" or "off" and enables whether to copy read
1662 When using the ``-snapshot`` option, unsafe caching is always used.
1664 Copy-on-read avoids accessing the same backing file sectors
1666 network. By default copy-on-read is off.
1668 Instead of ``-cdrom`` you can use:
1670 .. parsed-literal::
1672 |qemu_system| -drive file=file,index=2,media=cdrom
1674 Instead of ``-hda``, ``-hdb``, ``-hdc``, ``-hdd``, you can use:
1676 .. parsed-literal::
1678 |qemu_system| -drive file=file,index=0,media=disk
1679 |qemu_system| -drive file=file,index=1,media=disk
1680 |qemu_system| -drive file=file,index=2,media=disk
1681 |qemu_system| -drive file=file,index=3,media=disk
1683 You can open an image using pre-opened file descriptors from an fd
1686 .. parsed-literal::
1689 -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
1690 -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
1691 -drive file=/dev/fdset/2,index=0,media=disk
1695 .. parsed-literal::
1697 |qemu_system_x86| -drive file=file,if=ide,index=1,media=cdrom
1702 .. parsed-literal::
1704 |qemu_system_x86| -drive if=ide,index=1,media=cdrom
1706 Instead of ``-fda``, ``-fdb``, you can use:
1708 .. parsed-literal::
1710 |qemu_system_x86| -drive file=file,index=0,if=floppy
1711 |qemu_system_x86| -drive file=file,index=1,if=floppy
1716 .. parsed-literal::
1718 |qemu_system_x86| -drive file=a -drive file=b
1722 .. parsed-literal::
1724 |qemu_system_x86| -hda a -hdb b
1728 "-mtdblock file use 'file' as on-board Flash memory image\n",
1731 ``-mtdblock file``
1732 Use file as on-board Flash memory image.
1736 "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL)
1738 ``-sd file``
1743 "-snapshot write to temporary files instead of disk image files\n",
1746 ``-snapshot``
1749 force the write back by pressing C-a s (see the :ref:`disk images`
1753 snapshot is incompatible with ``-blockdev`` (instead use qemu-img
1755 If you have mixed ``-blockdev`` and ``-drive`` declarations you
1762 "-fsdev local,id=id,path=path,security_model=mapped-xattr|mapped-file|passthrough|none\n"
1764 " [[,throttling.bps-total=b]|[[,throttling.bps-read=r][,throttling.bps-write=w]]]\n"
1765 " [[,throttling.iops-total=i]|[[,throttling.iops-read=r][,throttling.iops-write=w]]]\n"
1766 …" [[,throttling.bps-total-max=bm]|[[,throttling.bps-read-max=rm][,throttling.bps-write-max=wm]]]\n"
1767 …" [[,throttling.iops-total-max=im]|[[,throttling.iops-read-max=irm][,throttling.iops-write-max=iwm…
1768 " [[,throttling.iops-size=is]]\n"
1769 "-fsdev synth,id=id\n",
1773 ``-fsdev local,id=id,path=path,security_model=security_model [,writeout=writeout][,readonly=on][,fm…
1775 ``-fsdev synth,id=id[,readonly=on]``
1793 Supported security models are "passthrough", "mapped-xattr",
1794 "mapped-file" and "none". In "passthrough" security model, files
1796 guest. This requires QEMU to run as root. In "mapped-xattr"
1799 "mapped-file" these attributes are stored in the hidden
1815 default read-write access is given.
1819 Works only with security models "mapped-xattr" and
1820 "mapped-file".
1824 host. Works only with security models "mapped-xattr" and
1825 "mapped-file".
1827 ``throttling.bps-total=b,throttling.bps-read=r,throttling.bps-write=w``
1831 ``throttling.bps-total-max=bm,bps-read-max=rm,bps-write-max=wm``
1836 ``throttling.iops-total=i,throttling.iops-read=r, throttling.iops-write=w``
1840 ``throttling.iops-total-max=im,throttling.iops-read-max=irm, throttling.iops-write-max=iwm``
1845 ``throttling.iops-size=is``
1849 -fsdev option is used along with -device driver "virtio-9p-...".
1851 ``-device virtio-9p-type,fsdev=id,mount_tag=mount_tag``
1852 Options for virtio-9p-... driver are:
1859 Specifies the id value specified along with -fsdev option.
1867 … "-virtfs local,path=path,mount_tag=tag,security_model=mapped-xattr|mapped-file|passthrough|none\n"
1869 "-virtfs synth,mount_tag=tag[,id=id][,readonly=on]\n",
1873 ``-virtfs local,path=path,mount_tag=mount_tag ,security_model=security_model[,writeout=writeout][,r…
1875 ``-virtfs synth,mount_tag=mount_tag``
1877 a virtio-9p-device (a.k.a. 9pfs), which essentially means that a certain
1878 directory on host is made directly accessible by guest as a pass-through
1883 Note that ``-virtfs`` is actually just a convenience shortcut for its
1884 generalized form ``-fsdev -device virtio-9p-pci``.
1886 The general form of pass-through file system options are:
1903 Supported security models are "passthrough", "mapped-xattr",
1904 "mapped-file" and "none". In "passthrough" security model, files
1906 guest. This requires QEMU to run as root. In "mapped-xattr"
1909 "mapped-file" these attributes are stored in the hidden
1925 default read-write access is given.
1929 Works only with security models "mapped-xattr" and
1930 "mapped-file".
1934 host. Works only with security models "mapped-xattr" and
1935 "mapped-file".
1970 "-iscsi [user=user][,password=password][,password-secret=secret-id]\n"
1971 " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE]\n"
1972 " [,initiator-name=initiator-iqn][,id=target-iqn]\n"
1977 ``-iscsi``
1986 "-usb enable on-board USB host controller (if not enabled by default)\n",
1989 ``-usb``
1990 Enable USB emulation on machine types with an on-board USB host
1991 controller (if not enabled by default). Note that on-board USB host
1993 ``-device qemu-xhci`` can be used instead on machines with PCI.
1997 "-usbdevice name add the host or guest USB device 'name'\n",
2000 ``-usbdevice devname``
2001 Add the USB device devname, and enable an on-board USB controller
2003 ``-machine usb=on``). Note that this option is mainly intended for
2004 the user's convenience only. More fine-grained control can be
2006 desired USB device via the ``-device`` option instead. For example,
2007 instead of using ``-usbdevice mouse`` it is possible to use
2008 ``-device qemu-xhci -device usb-mouse`` to connect the USB mouse
2019 ``usb-braille`` USB device).
2034 ``wacom-tablet``
2046 "-display spice-app[,gl=on|off]\n"
2049 "-display sdl[,gl=on|core|es|off][,grab-mod=<mod>][,show-cursor=on|off]\n"
2050 " [,window-close=on|off]\n"
2053 "-display gtk[,full-screen=on|off][,gl=on|off][,grab-on-hover=on|off]\n"
2054 " [,show-tabs=on|off][,show-cursor=on|off][,window-close=on|off]\n"
2055 " [,show-menubar=on|off][,zoom-to-fit=on|off]\n"
2058 "-display vnc=<display>[,<optargs>]\n"
2061 "-display curses[,charset=<encoding>]\n"
2064 "-display cocoa[,full-grab=on|off][,swap-opt-cmd=on|off]\n"
2065 " [,show-cursor=on|off][,left-command-key=on|off]\n"
2066 " [,full-screen=on|off][,zoom-to-fit=on|off]\n"
2069 "-display egl-headless[,rendernode=<file>]\n"
2072 "-display dbus[,addr=<dbusaddr>]\n"
2075 "-display none\n"
2079 "\"-display gtk\"\n"
2081 "\"-display sdl\"\n"
2083 "\"-display cocoa\"\n"
2085 "\"-vnc localhost:0,to=99,id=default\"\n"
2087 "\"-display none\"\n"
2091 ``-display type``
2092 Select type of display to use. Use ``-display help`` to list the available
2095 ``spice-app[,gl=on|off]``
2096 Start QEMU as a Spice server and launch the default Spice client
2097 application. The Spice server will redirect the serial consoles
2101 Export the display over D-Bus interfaces. (Since 7.0)
2106 ``addr=<dbusaddr>`` : D-Bus bus address to connect to.
2108 ``p2p=yes|no`` : Use peer-to-peer connection, accepted via QMP ``add_client``.
2110 ``gl=on|off|core|es`` : Use OpenGL for rendering (the D-Bus interface
2118 ``grab-mod=<mods>`` : Used to select the modifier keys for toggling
2120 either ``lshift-lctrl-lalt`` or ``rctrl``.
2124 ``show-cursor=on|off`` : Force showing the mouse cursor
2126 ``window-close=on|off`` : Allow to quit qemu with window close button
2130 drop-down menus and other UI elements to configure and control
2133 ``full-screen=on|off`` : Start in fullscreen mode
2137 ``grab-on-hover=on|off`` : Grab keyboard input on mouse hover
2139 ``show-tabs=on|off`` : Display the tab bar for switching between the
2143 ``show-cursor=on|off`` : Force showing the mouse cursor
2145 ``window-close=on|off`` : Allow to quit qemu with window close button
2147 ``show-menubar=on|off`` : Display the main window menubar, defaults to "on"
2149 ``zoom-to-fit=on|off`` : Expand video output to the window size,
2165 provides drop-down menus and other UI elements to configure and
2168 ``full-grab=on|off`` : Capture all key presses, including system combos.
2172 https://support.apple.com/en-in/guide/mac-help/mh32356/mac
2174 ``swap-opt-cmd=on|off`` : Swap the Option and Command keys so that their
2175 key codes match their position on non-Mac
2179 ``show-cursor=on|off`` : Force showing the mouse cursor
2181 ``left-command-key=on|off`` : Disable forwarding left command key to host
2183 ``full-screen=on|off`` : Start in fullscreen mode
2185 ``zoom-to-fit=on|off`` : Expand video output to the window size,
2188 ``egl-headless[,rendernode=<file>]``
2191 VNC or SPICE displays.
2199 the QEMU user. This option differs from the -nographic option in
2200 that it only affects what is done with video output; -nographic
2206 "-nographic disable graphical output and redirect serial I/Os to console\n",
2209 ``-nographic``
2212 monitor in a window. With this option, you can totally disable
2217 Use C-a h for help on switching between the console and monitor.
2221 DEF("spice", HAS_ARG, QEMU_OPTION_spice,
2222 "-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n"
2223 " [,x509-key-file=<file>][,x509-key-password=<file>]\n"
2224 " [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n"
2225 " [,x509-dh-key-file=<file>][,addr=addr]\n"
2227 " [,tls-ciphers=<list>]\n"
2228 " [,tls-channel=[main|display|cursor|inputs|record|playback]]\n"
2229 " [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n"
2230 " [,sasl=on|off][,disable-ticketing=on|off]\n"
2231 " [,password-secret=<secret-id>]\n"
2232 " [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]\n"
2233 " [,jpeg-wan-compression=[auto|never|always]]\n"
2234 " [,zlib-glz-wan-compression=[auto|never|always]]\n"
2235 " [,streaming-video=[off|all|filter]][,disable-copy-paste=on|off]\n"
2236 " [,disable-agent-file-xfer=on|off][,agent-mouse=[on|off]]\n"
2237 " [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n"
2239 " enable spice\n"
2240 " at least one of {port, tls-port} is mandatory\n",
2244 ``-spice option[,option[,...]]``
2245 Enable the spice remote desktop protocol. Valid options are
2248 Set the TCP port spice is listening on for plaintext channels.
2251 Set the IP address spice is listening on. Default is any
2257 ``password-secret=<secret-id>``
2262 Require that the client use SASL to authenticate with the spice.
2275 ``disable-ticketing=on|off``
2278 ``disable-copy-paste=on|off``
2279 Disable copy paste between the client and the guest.
2281 ``disable-agent-file-xfer=on|off``
2282 Disable spice-vdagent based file-xfer between the client and the
2285 ``tls-port=<nr>``
2286 Set the TCP port spice is listening on for encrypted channels.
2288 ``x509-dir=<dir>``
2289 Set the x509 file directory. Expects same filenames as -vnc
2292 …``x509-key-file=<file>``; \ ``x509-key-password=<file>``; \ ``x509-cert-file=<file>``; \ ``x509-ca…
2295 ``tls-ciphers=<list>``
2298 …``tls-channel=[main|display|cursor|inputs|record|playback]``; \ ``plaintext-channel=[main|display|…
2303 explicitly forced into one mode the spice client is allowed to
2306 ``image-compression=[auto_glz|auto_lz|quic|glz|lz|off]``
2309 ``jpeg-wan-compression=[auto|never|always]``; \ ``zlib-glz-wan-compression=[auto|never|always]``
2313 ``streaming-video=[off|all|filter]``
2316 ``agent-mouse=[on|off]``
2317 Enable/disable passing mouse events via vdagent. Default is on.
2319 ``playback-compression=[on|off]``
2320 Enable/disable audio stream compression (using celt 0.5.1).
2323 ``seamless-migration=[on|off]``
2324 Enable/disable spice seamless migration. Default is off.
2327 Enable/disable OpenGL context. Default is off.
2335 "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|virtio|none]\n"
2338 ``-vga type``
2355 VMWare SVGA-II compatible adapter. Use it if you have
2362 installed though. Recommended choice when using the spice
2367 framebuffer for sun4m machines and offers both 8-bit and 24-bit
2371 (sun4m only) Sun cgthree framebuffer. This is a simple 8-bit
2380 Disable VGA card.
2383 DEF("full-screen", 0, QEMU_OPTION_full_screen,
2384 "-full-screen start in full screen\n", QEMU_ARCH_ALL)
2386 ``-full-screen``
2391 "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n",
2394 ``-g`` *width*\ ``x``\ *height*\ ``[x``\ *depth*\ ``]``
2407 "-vnc <display> shorthand for -display vnc=<display>\n", QEMU_ARCH_ALL)
2410 ``-vnc display[,option[,option[,...]]]``
2416 using this option (option ``-device usb-tablet``). When using the
2417 VNC display, you must use the ``-k`` parameter to set the keyboard
2418 layout if you are not using en-us. Valid syntax for the display is
2422 until the number L, if the originally defined "-vnc display" is
2475 either "vnc" or "spice".
2478 should use ``expire_password <protocol> <expiration-time>``
2489 ``password-secret=<secret-id>``
2492 object identified by ``secret-id``.
2494 ``tls-creds=ID``
2500 using the ``-object tls-creds`` argument.
2502 ``tls-authz=ID``
2525 ``sasl-authz=ID``
2535 creation of two ``authz-list`` objects with IDs of
2540 ``sasl-authz`` and ``tls-authz`` options are a replacement.
2548 ``non-adaptive=on|off``
2549 Disable adaptive encodings. Adaptive encodings are enabled by
2556 ``share=[allow-exclusive|force-shared|ignore]``
2557 Set display sharing policy. 'allow-exclusive' allows clients to
2561 session (vncviewer: -shared switch). This is the default.
2562 'force-shared' disables exclusive client access. Useful for
2564 specify -shared disconnect everybody else. 'ignore' completely
2569 ``key-delay-ms``
2571 milliseconds. Default is 10. Keyboards are low-bandwidth
2579 transmission. When not using an -audiodev argument, this option
2583 ``power-control=on|off``
2592 DEF("win2k-hack", 0, QEMU_OPTION_win2k_hack,
2593 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n",
2596 ``-win2k-hack``
2599 option slows down the IDE transfers). Synonym of ``-global
2600 ide-device.win2k-install-hack=on``.
2603 DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk,
2604 "-no-fd-bootchk disable boot signature checking for floppy disks\n",
2607 ``-no-fd-bootchk``
2608 Disable boot signature checking for floppy disks in BIOS. May be
2609 needed to boot from old floppy disks. Synonym of ``-m fd-bootchk=off``.
2613 …"-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,a…
2616 ``-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n] [,asl_compiler_id=str][,…
2629 "-smbios file=binary\n"
2631 "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n"
2634 "-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n"
2637 "-smbios type=2[,manufacturer=str][,product=str][,version=str][,serial=str]\n"
2640 "-smbios type=3[,manufacturer=str][,version=str][,serial=str][,asset=str]\n"
2643 "-smbios type=4[,sock_pfx=str][,manufacturer=str][,version=str][,serial=str]\n"
2644 " [,asset=str][,part=str][,max-speed=%d][,current-speed=%d]\n"
2645 " [,processor-family=%d][,processor-id=%d]\n"
2647 …"-smbios type=8[,external_reference=str][,internal_reference=str][,connector_type=%d][,port_type=%…
2649 "-smbios type=11[,value=str][,path=filename]\n"
2651 "-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]\n"
2654 "-smbios type=41[,designation=str][,kind=str][,instance=%d][,pcidev=str]\n"
2658 ``-smbios file=binary``
2661 ``-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d][,uefi=on|off]``
2664 ``-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str][,uuid=uuid][,sku=str][…
2667 ``-smbios type=2[,manufacturer=str][,product=str][,version=str][,serial=str][,asset=str][,location=…
2670 ``-smbios type=3[,manufacturer=str][,version=str][,serial=str][,asset=str][,sku=str]``
2673 ``-smbios type=4[,sock_pfx=str][,manufacturer=str][,version=str][,serial=str][,asset=str][,part=str…
2676 ``-smbios type=9[,slot_designation=str][,slot_type=%d][,slot_data_bus_width=%d][,current_usage=%d][…
2679 ``-smbios type=11[,value=str][,path=filename]``
2700 .. parsed-literal::
2702 -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\\
2708 .. parsed-literal::
2710 $ dmidecode -t 11
2713 String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/
2718 ``-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str][,asset=str][,part=str][,…
2721 ``-smbios type=41[,designation=str][,kind=str][,instance=%d][,pcidev=str]``
2730 .. parsed-literal::
2732 -netdev user,id=internet \\
2733 -device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \\
2734 -smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
2738 ..parsed-literal::
2740 $ ip -brief l
2754 "-netdev user,id=str[,ipv4=on|off][,net=addr[/mask]][,host=addr]\n"
2755 " [,ipv6=on|off][,ipv6-net=addr[/int]][,ipv6-host=addr]\n"
2757 " [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,domainname=domain]\n"
2758 " [,tftp=dir][,tftp-server-name=name][,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
2766 "-netdev tap,id=str,ifname=name\n"
2769 "-netdev tap,id=str[,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile]\n"
2772 " [,poll-us=n]\n"
2778 " use '[down]script=no' to disable script execution\n"
2789 " use vhostforce=on to force vhost on for non-MSIX virtio guests\n"
2793 " use 'poll-us=n' to specify the maximum number of microseconds that could be\n"
2795 "-netdev bridge,id=str[,br=bridge][,helper=helper]\n"
2801 "-netdev l2tpv3,id=str,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport]\n"
2809 " VM to a router and even VM to Host. It is a nearly-universal\n"
2810 " standard (RFC3931). Note - this implementation uses static\n"
2811 " pre-configured tunnels (same as the Linux kernel).\n"
2823 " use 'counter=off' to force a 'cut-down' L2TPv3 with no counter\n"
2827 "-netdev socket,id=str[,fd=h][,listen=[host]:port][,connect=host:port]\n"
2830 "-netdev socket,id=str[,fd=h][,mcast=maddr:port[,localaddr=addr]]\n"
2833 "-netdev socket,id=str[,fd=h][,udp=host:port][,localaddr=host:port]\n"
2836 …-netdev stream,id=str[,server=on|off],addr.type=inet,addr.host=host,addr.port=port[,to=maxport][,n…
2837 …"-netdev stream,id=str[,server=on|off],addr.type=unix,addr.path=path[,abstract=on|off][,tight=on|o…
2838 …"-netdev stream,id=str[,server=on|off],addr.type=fd,addr.str=file-descriptor[,reconnect-ms=millise…
2841 …"-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=inet,local.h…
2842 …"-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=fd,local.str…
2845 …"-netdev dgram,id=str,local.type=inet,local.host=addr,local.port=port[,remote.type=inet,remote.hos…
2846 "-netdev dgram,id=str,local.type=unix,local.path=path[,remote.type=unix,remote.path=path]\n"
2847 "-netdev dgram,id=str,local.type=fd,local.str=file-descriptor\n"
2851 "-netdev vde,id=str[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n"
2858 "-netdev netmap,id=str,ifname=name[,devname=nmname]\n"
2859 " attach to the existing netmap-enabled network interface 'name', or to a\n"
2864 "-netdev af-xdp,id=str,ifname=name[,mode=native|skb][,force-copy=on|off]\n"
2865 " [,queues=n][,start-queue=m][,inhibit=on|off][,sock-fds=x:y:...:z]\n"
2868 …" use 'force-copy=on|off' to force XDP copy mode even if device supports zero-copy …
2871 " use 'sock-fds' to provide file descriptors for already open AF_XDP sockets\n"
2874 " use 'start-queue=m' to specify the first queue that should be used\n"
2877 "-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n"
2878 " configure a vhost-user network, backed by a chardev 'dev'\n"
2881 "-netdev vhost-vdpa,id=str[,vhostdev=/path/to/dev][,vhostfd=h]\n"
2882 " configure a vhost-vdpa network,Establish a vhost-vdpa netdev\n"
2887 "-netdev vmnet-host,id=str[,isolated=on|off][,net-uuid=uuid]\n"
2888 " [,start-address=addr,end-address=addr,subnet-mask=mask]\n"
2892 " specify network UUID 'uuid' to disable DHCP and interact with\n"
2893 " vmnet-host interfaces within this isolated network\n"
2894 "-netdev vmnet-shared,id=str[,isolated=on|off][,nat66-prefix=addr]\n"
2895 " [,start-address=addr,end-address=addr,subnet-mask=mask]\n"
2900 "-netdev vmnet-bridged,id=str,ifname=name[,isolated=on|off]\n"
2905 "-netdev hubport,id=str,hubid=n[,netdev=nd]\n"
2908 "-nic [tap|bridge|"
2922 "af-xdp|"
2925 "vhost-user|"
2928 "vmnet-host|vmnet-shared|vmnet-bridged|"
2931 " initialize an on-board / default host NIC (using MAC address\n"
2933 "-nic none use it alone to have zero network devices (the default is to\n"
2937 "-net nic[,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n"
2938 " configure or create an on-board (or machine default) NIC and\n"
2939 " connect it to hub 0 (please use -nic unless you need a hub)\n"
2940 "-net ["
2953 "af-xdp|"
2956 "vmnet-host|vmnet-shared|vmnet-bridged|"
2960 " (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL)
2962 ``-nic [tap|bridge|user|l2tpv3|vde|netmap|af-xdp|vhost-user|socket][,...][,mac=macaddr][,model=mn]``
2963 This option is a shortcut for configuring both the on-board
2966 ``-netdev`` options below. The guest NIC model can be set with
2970 The following two example do exactly the same, to show how ``-nic``
2973 .. parsed-literal::
2975 |qemu_system| -netdev user,id=n1,ipv6=off -device e1000,netdev=n1,mac=52:54:98:76:54:32
2976 |qemu_system| -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
2978 ``-nic none``
2984 ``-netdev user,id=id[,option][,option][,...]``
2998 top-most bits. Default is 10.0.2.0/24.
3001 Specify the guest-visible address of the host. Default is the
3004 ``ipv6-net=addr[/int]``
3008 as the number of valid top-most bits (default is 64).
3010 ``ipv6-host=addr``
3011 Specify the guest-visible IPv6 address of the host. Default is
3021 Specifies the client hostname reported by the built-in DHCP
3025 Specify the first of the 16 IPs the built-in DHCP server can
3030 Specify the guest-visible address of the virtual nameserver. The
3034 ``ipv6-dns=addr``
3035 Specify the guest-visible address of the IPv6 virtual
3040 Provides an entry for the domain-search list sent by the
3041 built-in DHCP server. More than one domain suffix can be
3049 .. parsed-literal::
3051 |qemu_system| -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
3054 Specifies the client domain name reported by the built-in DHCP
3058 When using the user mode network stack, activate a built-in TFTP
3062 The built-in TFTP server is read-only; it does not implement any
3065 ``tftp-server-name=name``
3078 .. parsed-literal::
3080 |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
3081 -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
3084 When using the user mode network stack, activate a built-in SMB
3104 ``hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport``
3108 (default first address given by the built-in DHCP server). By
3116 .. parsed-literal::
3119 |qemu_system| -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
3121 xterm -display :1
3126 .. parsed-literal::
3129 |qemu_system| -nic user,hostfwd=tcp::5555-:23
3135 ``guestfwd=[tcp]:server:port-dev``; \ ``guestfwd=[tcp]:server:port-cmd:command``
3144 .. parsed-literal::
3148 |qemu_system| -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
3154 .. parsed-literal::
3158 |qemu_system| -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
3160 ``-netdev tap,id=id[,fd=h][,ifname=name][,script=file][,downscript=dfile][,br=bridge][,helper=helpe…
3166 ``/etc/qemu-ifup`` and the default network deconfigure script is
3167 ``/etc/qemu-ifdown``. Use ``script=no`` or ``downscript=no`` to
3168 disable script execution.
3173 ``/path/to/qemu-bridge-helper`` and the default bridge device is
3181 .. parsed-literal::
3184 |qemu_system| linux.img -nic tap
3186 .. parsed-literal::
3191 -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
3192 -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
3194 .. parsed-literal::
3198 |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
3199 -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
3201 ``-netdev bridge,id=id[,br=bridge][,helper=helper]``
3206 ``/path/to/qemu-bridge-helper`` and the default bridge device is
3211 .. parsed-literal::
3215 |qemu_system| linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
3217 .. parsed-literal::
3221 |qemu_system| linux.img -netdev bridge,br=qemubr0,id=n1 -device virtio-net,netdev=n1
3223 ``-netdev socket,id=id[,fd=h][,listen=[host]:port][,connect=host:port]``
3233 .. parsed-literal::
3237 -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
3238 -netdev socket,id=n1,listen=:1234
3241 -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
3242 -netdev socket,id=n2,connect=127.0.0.1:1234
3244 ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
3254 ``ethN=mcast``), see http://user-mode-linux.sf.net.
3260 .. parsed-literal::
3264 -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
3265 -netdev socket,id=n1,mcast=230.0.0.1:1234
3268 -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
3269 -netdev socket,id=n2,mcast=230.0.0.1:1234
3272 -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
3273 -netdev socket,id=n3,mcast=230.0.0.1:1234
3277 .. parsed-literal::
3281 -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
3282 -netdev socket,id=n1,mcast=239.192.168.1:1102
3288 .. parsed-literal::
3291 -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
3292 -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
3294 …-netdev stream,id=str[,server=on|off],addr.type=inet,addr.host=host,addr.port=port[,to=maxport][,n…
3309 ``keep-alive=on|off``
3310 enable keep-alive when connecting to this socket. Not supported for passive sockets.
3321 ``reconnect-ms=milliseconds``
3327 .. parsed-literal::
3331 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3332 … -netdev stream,id=net0,server=on,addr.type=inet,addr.host=localhost,addr.port=1234
3335 -device virtio-net,netdev=net0,mac=52:54:00:12:34:57 \\
3336 …-netdev stream,id=net0,server=off,addr.type=inet,addr.host=localhost,addr.port=1234,reconnect-ms=5…
3338 ``-netdev stream,id=str[,server=on|off],addr.type=unix,addr.path=path[,abstract=on|off][,tight=on|o…
3353 ``reconnect-ms=milliseconds``
3357 Example (using passt as a replacement of -netdev user):
3359 .. parsed-literal::
3366 -device virtio-net,netdev=net0 \\
3367 -netdev stream,id=net0,server=off,addr.type=unix,addr.path=/tmp/passt_1.socket
3371 .. parsed-literal::
3375 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3379 -device virtio-net,netdev=net0,mac=52:54:00:12:34:57 \\
3380 … -netdev stream,id=net0,server=off,addr.type=unix,addr.path=/tmp/qemu0,reconnect-ms=5000
3382 ``-netdev stream,id=str[,server=on|off],addr.type=fd,addr.str=file-descriptor[,reconnect-ms=millise…
3388 ``addr.str=file-descriptor``
3391 ``reconnect-ms=milliseconds``
3395 ``-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=inet,local.h…
3406 .. parsed-literal::
3410 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3411 -netdev dgram,id=net0,remote.type=inet,remote.host=224.0.0.1,remote.port=1234
3414 -device virtio-net,netdev=net0,mac=52:54:00:12:34:57 \\
3415 -netdev dgram,id=net0,remote.type=inet,remote.host=224.0.0.1,remote.port=1234
3418 -device virtio-net,netdev=net0,mac=52:54:00:12:34:58 \\
3419 -netdev dgram,id=net0,remote.type=inet,remote.host=224.0.0.1,remote.port=1234
3421 ``-netdev dgram,id=str,remote.type=inet,remote.host=maddr,remote.port=port[,local.type=fd,local.str…
3427 ``local.str=file-descriptor``
3430 ``-netdev dgram,id=str,local.type=inet,local.host=addr,local.port=port[,remote.type=inet,remote.hos…
3442 .. parsed-literal::
3446 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3447 …-netdev dgram,id=net0,local.type=inet,local.host=localhost,local.port=1234,remote.type=inet,remote…
3450 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3451 …-netdev dgram,id=net0,local.type=inet,local.host=localhost,local.port=1235,remote.type=inet,remote…
3453 ``-netdev dgram,id=str,local.type=unix,local.path=path[,remote.type=unix,remote.path=path]``
3465 .. parsed-literal::
3469 -device virtio-net,netdev=net0,mac=52:54:00:12:34:56 \\
3470 …-netdev dgram,id=net0,local.type=unix,local.path=/tmp/qemu0,remote.type=unix,remote.path=/tmp/qemu1
3473 -device virtio-net,netdev=net0,mac=52:54:00:12:34:57 \\
3474 …-netdev dgram,id=net0,local.type=unix,local.path=/tmp/qemu1,remote.type=unix,remote.path=/tmp/qemu0
3476 ``-netdev dgram,id=str,local.type=fd,local.str=file-descriptor``
3480 ``local.str=file-descriptor``
3483 ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsess…
3519 Force a 'cut-down' L2TPv3 with no counter as in
3520 draft-mkonstan-l2tpext-keyed-ipv6-tunnel-00
3530 the bridge br-lan on the remote Linux host 1.2.3.4:
3532 .. parsed-literal::
3542 brctl addif br-lan vmtunnel0
3546 # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
3548 |qemu_system| linux.img -device e1000,netdev=n1 \\
3549 …-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp=on,srcport=16384,dstport=16384,rxsession=0xffffff…
3551 ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
3560 .. parsed-literal::
3563 vde_switch -F -sock /tmp/myswitch
3565 |qemu_system| linux.img -nic vde,sock=/tmp/myswitch
3567 ``-netdev af-xdp,id=str,ifname=name[,mode=native|skb][,force-copy=on|off][,queues=n][,start-queue=m…
3570 XDP program can be forced with 'mode', defaults to best-effort,
3573 defaults to 1. Traffic arriving on non-configured device queues will
3576 .. parsed-literal::
3579 ethtool -L eth0 combined 4
3581 |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
3582 -netdev af-xdp,id=n1,ifname=eth0,queues=4
3584 'start-queue' option can be specified if a particular range of queues
3592 .. parsed-literal::
3595 ethtool -L eth0 combined 1
3597 # note: drivers may require non-empty key/mask pair.
3598 ethtool -N eth0 flow-type ether \\
3600 ethtool -N eth0 flow-type ether \\
3603 |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
3604 -netdev af-xdp,id=n1,ifname=eth0,queues=1,start-queue=1
3607 should be set to 'on' and 'sock-fds' provided with file descriptors for
3611 .. parsed-literal::
3613 |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
3614 -netdev af-xdp,id=n1,ifname=eth0,queues=3,inhibit=on,sock-fds=15:16:17
3616 ``-netdev vhost-user,chardev=id[,vhostforce=on|off][,queues=n]``
3617 Establish a vhost-user netdev, backed by a chardev id. The chardev
3618 should be a unix domain socket backed one. The vhost-user uses a
3621 non-MSIX guests, the feature can be forced with vhostforce. Use
3623 multiqueue vhost-user.
3629 qemu -m 512 -object memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,share=on \
3630 -numa node,memdev=mem \
3631 -chardev socket,id=chr0,path=/path/to/socket \
3632 -netdev type=vhost-user,id=net0,chardev=chr0 \
3633 -device virtio-net-pci,netdev=net0
3635 ``-netdev vhost-vdpa[,vhostdev=/path/to/dev][,vhostfd=h]``
3636 Establish a vhost-vdpa netdev.
3643 ``-netdev hubport,id=id,hubid=hubid[,netdev=nd]``
3651 ``-net nic[,netdev=nd][,macaddr=mac][,model=type] [,name=name][,addr=addr][,vectors=v]``
3652 Legacy option to configure or create an on-board (or machine
3661 can specify the number v of MSI-X vectors that the card should have;
3663 disable MSI-X. If no ``-net`` option is specified, a single NIC is
3665 Use ``-net nic,model=help`` for a list of available devices for your
3668 ``-net user|tap|bridge|socket|l2tpv3|vde[,...][,name=name]``
3670 the same ``-netdev`` option) and connect it to the emulated hub 0
3679 "-chardev help\n"
3680 "-chardev null,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3681 …"-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4=on|off][,ipv6=on|off][,nodelay=on|off]\…
3682 …" [,server=on|off][,wait=on|off][,telnet=on|off][,websocket=on|off][,reconnect-ms=millisec…
3683 " [,logfile=PATH][,logappend=on|off][,tls-creds=ID][,tls-authz=ID] (tcp)\n"
3684 …"-chardev socket,id=id,path=path[,server=on|off][,wait=on|off][,telnet=on|off][,websocket=on|off][…
3686 "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n"
3689 "-chardev msmouse,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3690 "-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n"
3692 "-chardev ringbuf,id=id[,size=size][,logfile=PATH][,logappend=on|off]\n"
3693 …"-chardev file,id=id,path=path[,input-path=input-file][,mux=on|off][,logfile=PATH][,logappend=on|o…
3694 "-chardev pipe,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3696 "-chardev console,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3697 "-chardev serial,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3699 "-chardev pty,id=id[,path=path][,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3700 "-chardev stdio,id=id[,mux=on|off][,signal=on|off][,logfile=PATH][,logappend=on|off]\n"
3703 "-chardev braille,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3707 "-chardev serial,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3710 "-chardev parallel,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n"
3713 "-chardev spicevmc,id=id,name=name[,debug=debug][,logfile=PATH][,logappend=on|off]\n"
3714 "-chardev spiceport,id=id,name=name[,debug=debug][,logfile=PATH][,logappend=on|off]\n"
3722 ``-chardev backend,id=id[,mux=on|off][,options]``
3729 Use ``-chardev help`` to print all available chardev backend types.
3736 front-ends. Specify ``mux=on`` to enable this mode. A multiplexer is
3750 -chardev stdio,mux=on,id=char0 \
3751 -mon chardev=char0,mode=readline \
3752 -serial chardev:char0 \
3753 -serial chardev:char0
3762 -chardev stdio,mux=on,id=char0 \
3763 -mon chardev=char0,mode=readline \
3764 -parallel chardev:char0 \
3765 -chardev tcp,...,mux=on,id=char1 \
3766 -serial chardev:char1 \
3767 -serial chardev:char1
3775 multiplexed character backends; for instance ``-serial mon:stdio``
3777 the QEMU monitor, and ``-nographic`` also multiplexes the console
3791 ``-chardev null,id=id``
3795 …-chardev socket,id=id[,TCP options or unix options][,server=on|off][,wait=on|off][,telnet=on|off][…
3796 Create a two-way stream socket, which can be either a TCP or a unix
3812 ``reconnect-ms`` sets the timeout for reconnecting on non-server
3817 ``tls-creds`` requests enablement of the TLS protocol for
3820 ``-object tls-creds`` argument.
3822 ``tls-auth`` provides the ID of the QAuthZ authorization object
3860 ``-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr][,localport=localport][,ipv4=on|off…
3878 ``-chardev msmouse,id=id``
3882 ``-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]``
3892 ``-chardev ringbuf,id=id[,size=size]``
3896 ``-chardev file,id=id,path=path[,input-path=input-path]``
3903 If ``input-path`` is specified, this is the path of a second file
3904 which will be used for input. If ``input-path`` is not specified,
3907 Note that ``input-path`` is not supported on Windows hosts.
3909 ``-chardev pipe,id=id,path=path``
3910 Create a two-way connection to the guest. The behaviour differs
3924 ``-chardev console,id=id``
3930 ``-chardev serial,id=id,path=path``
3938 ``-chardev pty,id=id[,path=path]``
3939 Create a new pseudo-terminal on the host and connect to it.
3954 ``-chardev stdio,id=id[,signal=on|off]``
3958 includes exiting QEMU with the key sequence Control-c. This option
3959 is enabled by default, use ``signal=off`` to disable it.
3961 ``-chardev braille,id=id``
3965 ``-chardev parallel,id=id,path=path``
3975 ``-chardev spicevmc,id=id,debug=debug,name=name``
3976 ``spicevmc`` is only available when spice support is built in.
3980 ``name`` name of spice channel to connect to
3982 Connect to a spice virtual machine channel, such as vdiport.
3984 ``-chardev spiceport,id=id,debug=debug,name=name``
3985 ``spiceport`` is only available when spice support is built in.
3989 ``name`` name of spice port to connect to
3991 Connect to a spice port, allowing a Spice client to handle the
4001 "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n"
4003 " use cancel-path to provide path to TPM's cancel sysfs entry; if\n"
4005 "-tpmdev emulator,id=id,chardev=dev\n"
4011 ``-tpmdev backend,id=id[,options]``
4013 ``-tpmdev`` option creates the TPM backend and requires a
4014 ``-device`` option that specifies the TPM frontend interface model.
4016 Use ``-tpmdev help`` to print all available TPM backend types.
4020 ``-tpmdev passthrough,id=id,path=path,cancel-path=cancel-path``
4021 (Linux-host only) Enable access to the host's TPM using the
4028 ``cancel-path`` specifies the path to the host TPM device's sysfs
4030 ``cancel-path`` is optional and by default QEMU will search for the
4040 the TPM again and may therefore not show a TPM-specific menu that
4042 user to enable/disable or activate/deactivate the TPM. Further, if
4053 -tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0
4055 Note that the ``-tpmdev`` id is ``tpm0`` and is referenced by
4058 ``-tpmdev emulator,id=id,chardev=dev``
4059 (Linux-host only) Enable access to a TPM emulator using Unix domain
4069 …-chardev socket,id=chrtpm,path=/tmp/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm…
4080 - specify a firmware and let it control finding a kernel
4081 - specify a firmware and pass a hint to the kernel to boot
4082 - direct kernel image boot
4083 - manually load files into the guest's address space
4101 For x86 machines and some other architectures ``-bios`` will generally
4103 more strict ``-pflash`` option needs an image that is sized for the
4106 Please see the :ref:`system-targets-ref` section of the manual for
4112 "-bios file set the filename for the BIOS\n", QEMU_ARCH_ALL)
4114 ``-bios file``
4119 "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL)
4121 ``-pflash file``
4141 "-kernel bzImage use 'bzImage' as kernel image\n", QEMU_ARCH_ALL)
4143 ``-kernel bzImage``
4149 "-append cmdline use 'cmdline' as kernel command line\n", QEMU_ARCH_ALL)
4151 ``-append cmdline``
4156 "-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL)
4159 ``-initrd file``
4162 ``-initrd "file1 arg=foo,file2"``
4169 ``-initrd "bzImage earlyprintk=xen,,keep root=/dev/xvda1,initrd.img"``
4177 "-dtb file use 'file' as device tree image\n", QEMU_ARCH_ALL)
4179 ``-dtb file``
4193 ``-device loader,addr=<addr>,data=<data>,data-len=<data-len>[,data-be=<data-be>][,cpu-num=<cpu-num>…
4196 tweaks the DTB so a hypervisor loaded via ``-kernel`` can find where
4199 ``-device guest-loader,addr=<addr>[,kernel=<path>,[bootargs=<arguments>]][,initrd=<path>]``
4208 "-compat [deprecated-input=accept|reject|crash][,deprecated-output=accept|hide]\n"
4210 "-compat [unstable-input=accept|reject|crash][,unstable-output=accept|hide]\n"
4214 ``-compat [deprecated-input=@var{input-policy}][,deprecated-output=@var{output-policy}]``
4217 ``deprecated-input=accept`` (default)
4219 ``deprecated-input=reject``
4221 ``deprecated-input=crash``
4223 ``deprecated-output=accept`` (default)
4225 ``deprecated-output=hide``
4230 ``-compat [unstable-input=@var{input-policy}][,unstable-output=@var{output-policy}]``
4233 ``unstable-input=accept`` (default)
4235 ``unstable-input=reject``
4237 ``unstable-input=crash``
4239 ``unstable-output=accept`` (default)
4241 ``unstable-output=hide``
4248 "-fw_cfg [name=]<name>,file=<file>\n"
4250 "-fw_cfg [name=]<name>,string=<str>\n"
4254 ``-fw_cfg [name=]name,file=file``
4259 ``-fw_cfg [name=]name,string=str``
4274 -fw_cfg name=opt/com.mycompany/blob,file=./my_blob.bin
4281 "-serial dev redirect the serial port to char device 'dev'\n",
4284 ``-serial dev``
4292 You can use ``-serial none`` to suppress the creation of default
4339 Use a named character device defined with the ``-chardev``
4369 ``-serial udp::4555`` and nc as: ``nc -u -l -p 4555``. Any time
4375 the same source port each time by using something like ``-serial
4385 -serial udp::4555@:4556
4388 -u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T
4393 ``tcp:[host]:port[,server=on|off][,wait=on|off][,nodelay=on|off][,reconnect-ms=milliseconds]``
4400 option disables the Nagle buffering algorithm. The ``reconnect-ms``
4408 -serial tcp:192.168.0.2:4444
4411 -serial tcp::4444,server=on
4414 -serial tcp:192.168.0.100:4444,server=on,wait=off
4418 options work the same as if you had specified ``-serial tcp``.
4423 you do it with Control-] and then type "send break" followed by
4430 ``unix:path[,server=on|off][,wait=on|off][,reconnect-ms=milliseconds]``
4432 works the same as if you had specified ``-serial tcp`` except
4438 sequence of Control-a and then pressing c. dev\_string should be
4443 ``-serial mon:telnet::4444,server=on,wait=off``
4459 "-parallel dev redirect the parallel port to char device 'dev'\n",
4462 ``-parallel dev``
4471 Use ``-parallel none`` to disable all parallel ports.
4475 "-monitor dev redirect the monitor to char device 'dev'\n",
4478 ``-monitor dev``
4481 in non graphical mode. Use ``-monitor none`` to disable the default
4485 "-qmp dev like -monitor but opens in 'control' mode\n",
4488 ``-qmp dev``
4489 Like ``-monitor`` but opens in 'control' mode. For example, to make
4492 -qmp tcp:localhost:4444,server=on,wait=off
4495 flexibility use the ``-mon`` option and an accompanying ``-chardev``.
4498 DEF("qmp-pretty", HAS_ARG, QEMU_OPTION_qmp_pretty, \
4499 "-qmp-pretty dev like -qmp but uses pretty JSON formatting\n",
4502 ``-qmp-pretty dev``
4503 Like ``-qmp`` but uses pretty JSON formatting.
4507 "-mon [chardev=]name[,mode=readline|control][,pretty[=on|off]]\n", QEMU_ARCH_ALL)
4509 ``-mon [chardev=]name[,mode=readline|control][,pretty[=on|off]]``
4513 (QMP; a JSON RPC-style protocol).
4521 -chardev socket,id=mon1,host=localhost,port=4444,server=on,wait=off \
4522 -mon chardev=mon1,mode=control,pretty=on
4524 enables the QMP monitor on localhost port 4444 with pretty-printing.
4528 "-debugcon dev redirect the debug console to char device 'dev'\n",
4531 ``-debugcon dev``
4540 "-pidfile file write PID to 'file'\n", QEMU_ARCH_ALL)
4542 ``-pidfile file``
4548 "--preconfig pause QEMU before machine is initialized (experimental)\n",
4551 ``--preconfig``
4554 affect machine initialization. Use QMP command 'x-exit-preconfig' to
4556 if -S isn't used or pause the second time if -S is used). This
4561 "-S freeze CPU at startup (use 'c' to start execution)\n",
4564 ``-S``
4569 "-overcommit [mem-lock=on|off][cpu-pm=on|off]\n"
4571 " mem-lock=on|off controls memory lock support (default: off)\n"
4572 " cpu-pm=on|off controls cpu power management (default: off)\n",
4575 ``-overcommit mem-lock=on|off``
4577 ``-overcommit cpu-pm=on|off``
4581 Locking qemu and guest memory can be enabled via ``mem-lock=on``
4583 overcommitted and reduces the worst-case latency for guest.
4587 guest) can be enabled via ``cpu-pm=on`` (disabled by default). This
4594 "-gdb dev accept gdb connection on 'dev'. (QEMU defaults to starting\n"
4595 " the guest without waiting for gdb to connect; use -S too\n"
4599 ``-gdb dev``
4602 execution -- if you want QEMU to not start the guest until you
4604 also pass the ``-S`` option to QEMU.
4608 -gdb tcp::3117
4615 .. parsed-literal::
4617 (gdb) target remote | exec |qemu_system| -gdb stdio ...
4621 "-s shorthand for -gdb tcp::" DEFAULT_GDBSTUB_PORT "\n",
4624 ``-s``
4625 Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234
4630 "-d item1,... enable logging of specified items (use '-d help' for a list of log items)\n",
4633 ``-d item1[,...]``
4634 Enable logging of specified items. Use '-d help' for a list of log
4639 "-D logfile output log to logfile (default stderr)\n",
4642 ``-D logfile``
4647 "-dfilter range,.. filter debug output to range of addresses (useful for -d cpu,exec,etc..)\n",
4650 ``-dfilter range1[,...]``
4652 The filter spec can be either start+size, start-size or start..end
4658 -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,0xffffffc000060000-0x1000
4666 "-seed number seed the pseudo-random number generator\n",
4669 ``-seed number``
4670 Force the guest to use a deterministic pseudo-random number
4676 "-L path set the directory for the BIOS, VGA BIOS and keymaps\n",
4679 ``-L path``
4682 To list all the data directories, use ``-L help``.
4685 DEF("enable-kvm", 0, QEMU_OPTION_enable_kvm, \
4686 "-enable-kvm enable KVM full virtualization support\n",
4690 ``-enable-kvm``
4695 DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid,
4696 "-xen-domid id specify xen guest domain id\n",
4698 DEF("xen-attach", 0, QEMU_OPTION_xen_attach,
4699 "-xen-attach attach to existing xen domain\n"
4702 DEF("xen-domid-restrict", 0, QEMU_OPTION_xen_domid_restrict,
4703 "-xen-domid-restrict restrict set of available xen operations\n"
4708 ``-xen-domid id``
4711 ``-xen-attach``
4717 DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \
4718 "-no-reboot exit instead of rebooting\n", QEMU_ARCH_ALL)
4720 ``-no-reboot``
4724 DEF("no-shutdown", 0, QEMU_OPTION_no_shutdown, \
4725 "-no-shutdown stop before shutdown\n", QEMU_ARCH_ALL)
4727 ``-no-shutdown``
4734 "-action reboot=reset|shutdown\n"
4736 "-action shutdown=poweroff|pause\n"
4738 "-action panic=pause|shutdown|exit-failure|none\n"
4740 "-action watchdog=reset|shutdown|poweroff|inject-nmi|pause|debug|none\n"
4744 ``-action event=action``
4747 same behaviors that are modified by the ``-no-reboot`` and ``-no-shutdown``
4752 ``-action panic=none``
4753 ``-action reboot=shutdown,shutdown=pause``
4754 ``-device i6300esb -action watchdog=pause``
4759 "-loadvm [tag|id]\n" \
4763 ``-loadvm file``
4769 "-daemonize daemonize QEMU after initializing\n", QEMU_ARCH_ALL)
4772 ``-daemonize``
4780 DEF("option-rom", HAS_ARG, QEMU_OPTION_option_rom, \
4781 "-option-rom rom load a file, rom, into the option ROM space\n",
4784 ``-option-rom file``
4790 "-rtc [base=utc|localtime|<datetime>][,clock=host|rt|vm][,driftfix=none|slew]\n" \
4795 ``-rtc [base=utc|localtime|datetime][,clock=host|rt|vm][,driftfix=none|slew]``
4798 required for correct date in MS-DOS or Windows. To start at a
4800 ``2006-06-17T16:01:21`` or ``2006-06-17``. The default base is UTC.
4818 Windows guest and will re-inject them.
4822 …"-icount [shift=N|auto][,align=on|off][,sleep=on|off][,rr=record|replay,rrfile=<filename>[,rrsnaps…
4825 " or disable real time cpu sleeping, and optionally enable\n" \
4826 " record-and-replay mode\n", QEMU_ARCH_ALL)
4828 ``-icount [shift=N|auto][,align=on|off][,sleep=on|off][,rr=record|replay,rrfile=filename[,rrsnapsho…
4872 DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \
4873 "-watchdog-action reset|shutdown|poweroff|inject-nmi|pause|debug|none\n" \
4877 ``-watchdog-action action``
4882 ``inject-nmi`` (inject a NMI into the guest), ``pause`` (pause the
4889 ``-watchdog-action shutdown`` is not recommended for production use.
4893 ``-device i6300esb -watchdog-action pause``
4898 "-echr chr set terminal escape character instead of ctrl-a\n",
4901 ``-echr numeric_ascii_value``
4904 the ``-nographic`` option. ``0x01`` is equal to pressing
4905 ``Control-a``. You can select a different character from the ascii
4906 control keys where 1 through 26 map to Control-a through Control-z.
4908 escape character to Control-t.
4910 ``-echr 0x14``; \ ``-echr 20``
4915 "-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]\n" \
4916 "-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]\n" \
4917 "-incoming unix:socketpath\n" \
4920 "-incoming fd:fd\n" \
4921 "-incoming file:filename[,offset=offset]\n" \
4922 "-incoming exec:cmdline\n" \
4925 "-incoming defer\n" \
4929 ``-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]``
4931 ``-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]``
4934 ``-incoming unix:socketpath``
4937 ``-incoming fd:fd``
4940 ``-incoming file:filename[,offset=offset]``
4944 ``-incoming exec:cmdline``
4948 ``-incoming defer``
4954 DEF("only-migratable", 0, QEMU_OPTION_only_migratable, \
4955 "-only-migratable allow only migratable devices\n", QEMU_ARCH_ALL)
4957 ``-only-migratable``
4963 "-nodefaults don't create default devices\n", QEMU_ARCH_ALL)
4965 ``-nodefaults``
4968 device, VGA adapter, floppy and CD-ROM drive and others. The
4969 ``-nodefaults`` option will disable all those default devices.
4974 "-runas user change to user id user just before starting the VM\n" \
4979 ``-runas user``
4982 ``-run-with user=...`` instead.
4985 DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env,
4986 "-prom-env variable=value\n"
4990 ``-prom-env variable=value``
4995 qemu-system-sparc -prom-env 'auto-boot?=false' \
4996 -prom-env 'boot-device=sd(0,2,0):d' -prom-env 'boot-args=linux single'
5000 qemu-system-ppc -prom-env 'auto-boot?=false' \
5001 -prom-env 'boot-device=hd:2,\yaboot' \
5002 -prom-env 'boot-args=conf=hd:2,\yaboot.conf'
5005 "-semihosting semihosting mode\n",
5009 ``-semihosting``
5010 Enable :ref:`Semihosting` mode (ARM, M68K, Xtensa, MIPS, RISC-V only).
5016 See the -semihosting-config option documentation for further
5019 DEF("semihosting-config", HAS_ARG, QEMU_OPTION_semihosting_config,
5020 …"-semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,userspace=on|off][,arg…
5025 ``-semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,userspace=on|off][,arg…
5026 Enable and configure :ref:`Semihosting` (ARM, M68K, Xtensa, MIPS, RISC-V
5047 bare-metal test case code).
5051 multiple times to build up a list. The old-style
5052 ``-kernel``/``-append`` method of passing a command line is
5054 ``--semihosting-config arg`` and the ``-kernel``/``-append`` are
5058 DEF("old-param", 0, QEMU_OPTION_old_param,
5059 "-old-param old param mode\n", QEMU_ARCH_ARM)
5061 ``-old-param``
5066 "-sandbox on[,obsolete=allow|deny][,elevateprivileges=allow|deny|children]\n" \
5078 " use 'resourcecontrol' to disable process affinity and schedular priority\n",
5081 ``-sandbox arg[,obsolete=string][,elevateprivileges=string][,spawn=string][,resourcecontrol=string]…
5083 filtering and 'off' will disable it. The default is 'off'.
5089 Disable set\*uid\|gid system calls
5092 Disable \*fork and execve
5095 Disable process affinity and schedular priority
5099 "-readconfig <file>\n"
5102 ``-readconfig file``
5108 DEF("no-user-config", 0, QEMU_OPTION_nouserconfig,
5109 "-no-user-config\n"
5110 " do not load default user-provided config files at startup\n",
5113 ``-no-user-config``
5114 The ``-no-user-config`` option makes QEMU not load any of the
5115 user-provided config files on sysconfdir.
5119 "-trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
5123 ``-trace [[enable=]pattern][,events=file][,file=file]``
5124 .. include:: ../qemu-option-trace.rst.inc
5128 "-plugin [file=]<file>[,<argname>=<argvalue>]\n"
5132 ``-plugin file=file[,argname=argvalue]``
5144 DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, "", QEMU_ARCH_ALL)
5147 DEF("run-with", HAS_ARG, QEMU_OPTION_run_with,
5148 "-run-with [async-teardown=on|off][,chroot=dir][user=username|uid:gid]\n"
5150 " async-teardown=on enables asynchronous teardown (Linux only)\n"
5153 " user=uid:gid ditto, but use specified user-ID and group-ID instead\n",
5156 ``-run-with [async-teardown=on|off][,chroot=dir][user=username|uid:gid]``
5159 ``async-teardown=on`` enables asynchronous teardown. A new process called
5172 in combination with -runas.
5184 "-msg [timestamp[=on|off]][,guest-name=[on|off]]\n"
5187 " guest-name=on enables guest name prefix but only if\n"
5188 " -name guest option is set (default: off)\n",
5191 ``-msg [timestamp[=on|off]][,guest-name[=on|off]]``
5197 ``guest-name=on|off``
5198 Prefix messages with guest name but only if -name guest option is set
5202 DEF("dump-vmstate", HAS_ARG, QEMU_OPTION_dump_vmstate,
5203 "-dump-vmstate <file>\n"
5205 " Use the scripts/vmstate-static-checker.py file to\n"
5210 ``-dump-vmstate file``
5211 Dump json-encoded vmstate information for current machine type to
5215 DEF("enable-sync-profile", 0, QEMU_OPTION_enable_sync_profile,
5216 "-enable-sync-profile\n"
5220 ``-enable-sync-profile``
5226 "-perfmap generate a /tmp/perf-${pid}.map file for perf\n",
5229 ``-perfmap``
5235 "-jitdump generate a jit-${pid}.dump file for perf\n",
5238 ``-jitdump``
5249 "-object TYPENAME[,PROP1=VALUE1,...]\n"
5256 ``-object typename[,prop1=value1,...]``
5261 …``-object memory-backend-file,id=id,size=size,mem-path=dir,share=on|off,discard-data=on|off,merge=…
5266 reference this memory region in other parameters, e.g. ``-numa``,
5267 ``-device nvdimm``, etc.
5272 The ``mem-path`` provides the path to either a shared memory or
5277 allows a co-operating external process to access the QEMU memory
5285 Setting the ``discard-data`` boolean option to on indicates that
5288 ``discard-data`` is only an optimization, and QEMU might not
5301 The ``host-nodes`` option binds the memory range to a list of
5321 QEMU mmap(2) ``mem-path``, and accepts common suffixes, eg
5322 ``2M``. Some backend store specified by ``mem-path`` requires an
5333 by ``mem-path`` is in host persistent memory that can be
5337 ``mem-path`` (e.g. in vNVDIMM label emulation and live
5338 migration). Also, we will map the backend-file with MAP\_SYNC
5340 ``mem-path`` in case of host crash or a power failure. MAP\_SYNC
5342 4.15) and the filesystem of ``mem-path`` mounted with DAX
5346 read-only or read-write (default).
5362 …``-object memory-backend-ram,id=id,merge=on|off,dump=on|off,share=on|off,prealloc=on|off,size=size…
5365 ``-m`` option that is traditionally used to define guest RAM.
5366 Please refer to ``memory-backend-file`` for a description of the
5369 …``-object memory-backend-memfd,id=id,merge=on|off,dump=on|off,share=on|off,prealloc=on|off,size=si…
5372 using vhost-user). The memory is allocated with memfd and
5375 The ``seal`` option creates a sealed-file, that will block
5389 Please refer to ``memory-backend-file`` for a description of the
5394 …``-object memory-backend-shm,id=id,merge=on|off,dump=on|off,share=on|off,prealloc=on|off,size=size…
5397 using vhost-user).
5399 ``memory-backend-shm`` is a more portable and less featureful version
5400 of ``memory-backend-memfd``. It can then be used in any POSIX system,
5403 Please refer to ``memory-backend-file`` for a description of the
5410 ``-object iommufd,id=id[,fd=fd]``
5415 vfio-pci of vdpa) will use to connect with the iommufd backend.
5417 The ``fd`` parameter is an optional pre-opened file descriptor
5422 ``-object rng-builtin,id=id``
5426 ``virtio-rng`` device. By default, the ``virtio-rng`` device
5429 ``-object rng-random,id=id,filename=/dev/random``
5433 ``virtio-rng`` device. The ``filename`` parameter specifies
5437 ``-object rng-egd,id=id,chardev=chardevid``
5441 entropy backend from the ``virtio-rng`` device. The ``chardev``
5445 ``-object tls-creds-anon,id=id,endpoint=endpoint,dir=/path/to/cred/dir,verify-peer=on|off``
5452 ``verify-peer`` is enabled (the default) then once the handshake
5454 is a no-op for anonymous credentials.
5458 dh-params.pem providing diffie-hellman parameters to use for the
5465 ``-object tls-creds-psk,id=id,endpoint=endpoint,dir=/path/to/keys/dir[,username=username]``
5466 Creates a TLS Pre-Shared Keys (PSK) credentials object, which
5480 For server endpoints, dir may also contain a file dh-params.pem
5481 providing diffie-hellman parameters to use for the TLS server.
5488 …``-object tls-creds-x509,id=id,endpoint=endpoint,dir=/path/to/cred/dir,priority=priority,verify-pe…
5495 ``verify-peer`` is enabled (the default) then once the handshake
5502 dh-params.pem providing diffie-hellman parameters to use for the
5511 must be stored in PEM format, in filenames ca-cert.pem,
5512 ca-crl.pem (optional), server-cert.pem (only servers),
5513 server-key.pem (only servers), client-cert.pem (only clients),
5514 and client-key.pem (only clients).
5516 For the server-key.pem and client-key.pem files which contain
5530 https://gnutls.org/manual/html_node/Priority-Strings.html.
5532 ``-object tls-cipher-suites,id=id,priority=priority``
5549 https://gnutls.org/manual/html_node/Priority-Strings.html.
5552 The tls-cipher-suites object exposes the ordered list of permitted
5556 guest-side TLS.
5558 In the following example, the priority at which the host-side policy
5561 refer to /etc/crypto-policies/back-ends/gnutls.config.
5563 .. parsed-literal::
5566 -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
5567 -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
5569 …``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,positi…
5610 …``-object filter-mirror,id=id,netdev=netdevid,outdev=chardevid,queue=all|rx|tx[,vnet_hdr_support][…
5611 filter-mirror on netdev netdevid,mirror net packet to
5613 filter-mirror will mirror packet with vnet\_hdr\_len.
5615 …``-object filter-redirector,id=id,netdev=netdevid,indev=chardevid,outdev=chardevid,queue=all|rx|tx…
5616 filter-redirector on netdev netdevid,redirect filter's net
5618 filter.if it has the vnet\_hdr\_support flag, filter-redirector
5620 filter-redirector we need to differ outdev id from indev id, id
5624 …``-object filter-rewriter,id=id,netdev=netdevid,queue=all|rx|tx,[vnet_hdr_support][,position=head|…
5625 Filter-rewriter is a part of COLO project.It will rewrite tcp
5631 usage: colo secondary: -object
5632 filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object
5633 filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object
5634 filter-rewriter,id=rew0,netdev=hn0,queue=all
5636 …``-object filter-dump,id=id,netdev=dev[,file=filename][,maxlen=len][,position=head|tail|id=<id>][,…
5642 …``-object colo-compare,id=id,primary_in=chardevid,secondary_in=chardevid,outdev=chardevid,iothread…
5643 Colo-compare gets packet from primary\_in chardevid and
5646 primary packet to out\_dev, else it will notify COLO-framework to do
5652 colo-compare hold the packet. The expired\_scan\_cycle=@var{ms}
5657 notify Xen colo-frame to do checkpoint.
5659 COLO-compare must be used with the help of filter-mirror,
5660 filter-redirector and filter-rewriter.
5667 -netdev tap,id=hn0,vhost=off
5668 -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
5669 -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server=on,wait=off
5670 -chardev socket,id=compare1,host=3.3.3.3,port=9004,server=on,wait=off
5671 -chardev socket,id=compare0,host=3.3.3.3,port=9001,server=on,wait=off
5672 -chardev socket,id=compare0-0,host=3.3.3.3,port=9001
5673 -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server=on,wait=off
5674 -chardev socket,id=compare_out0,host=3.3.3.3,port=9005
5675 -object iothread,id=iothread1
5676 -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
5677 -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
5678 -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
5679 …-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,ioth…
5682 -netdev tap,id=hn0,vhost=off
5683 -device e1000,netdev=hn0,mac=52:a4:00:12:78:66
5684 -chardev socket,id=red0,host=3.3.3.3,port=9003
5685 -chardev socket,id=red1,host=3.3.3.3,port=9004
5686 -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
5687 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
5693 -netdev tap,id=hn0,vhost=off
5694 -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
5695 -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server=on,wait=off
5696 -chardev socket,id=compare1,host=3.3.3.3,port=9004,server=on,wait=off
5697 -chardev socket,id=compare0,host=3.3.3.3,port=9001,server=on,wait=off
5698 -chardev socket,id=compare0-0,host=3.3.3.3,port=9001
5699 -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server=on,wait=off
5700 -chardev socket,id=compare_out0,host=3.3.3.3,port=9005
5701 -chardev socket,id=notify_way,host=3.3.3.3,port=9009,server=on,wait=off
5702 -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
5703 -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
5704 -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
5705 -object iothread,id=iothread1
5706 …-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,noti…
5709 -netdev tap,id=hn0,vhost=off
5710 -device e1000,netdev=hn0,mac=52:a4:00:12:78:66
5711 -chardev socket,id=red0,host=3.3.3.3,port=9003
5712 -chardev socket,id=red1,host=3.3.3.3,port=9004
5713 -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
5714 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
5717 read the colo-compare git log.
5719 ``-object cryptodev-backend-builtin,id=id[,queues=queues]``
5723 ``virtio-crypto`` device. The queues parameter is optional,
5727 .. parsed-literal::
5731 -object cryptodev-backend-builtin,id=cryptodev0 \\
5732 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
5735 ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
5736 Creates a vhost-user cryptodev backend, backed by a chardev
5738 reference this cryptodev backend from the ``virtio-crypto``
5740 The vhost-user uses a specifically defined protocol to pass
5744 vhost-user, the default of queues is 1.
5746 .. parsed-literal::
5750 -chardev socket,id=chardev0,path=/path/to/socket \\
5751 -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
5752 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
5755 ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
5757 ``-object secret,id=id,file=filename,format=raw|base64[,keyid=secretid,iv=string]``
5766 valid UTF-8 characters, so base64 is recommended for sending
5773 associated with a secret using the AES-256-CBC cipher. Use of
5776 defined secret that contains the AES-256 decryption key. This
5777 key should be 32-bytes long and be base64 encoded. The iv
5780 encrypted string of the 16-byte IV.
5784 .. parsed-literal::
5786 # |qemu_system| -object secret,id=sec0,data=letmein,format=raw
5790 # printf "letmein" > mypasswd.txt # QEMU\_SYSTEM\_MACRO -object
5793 For greater security, AES-256-CBC should be used. To illustrate
5803 # openssl rand -base64 32 > key.b64
5804 # KEY=$(base64 -d key.b64 | hexdump -v -e '/1 "%02X"')
5812 # openssl rand -base64 16 > iv.b64
5813 # IV=$(base64 -d iv.b64 | hexdump -v -e '/1 "%02X"')
5822 openssl enc -aes-256-cbc -a -K $KEY -iv $IV)
5828 .. parsed-literal::
5831 -object secret,id=secmaster0,format=base64,file=key.b64 \\
5832 -object secret,id=sec0,keyid=secmaster0,format=base64,\\
5835 …-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,han…
5841 bit (aka the C-bit) is utilized to mark if a memory page is
5842 protected. The ``cbitpos`` is used to provide the C-bit
5843 position. The C-bit position is Host family dependent hence user
5847 physical address space. The ``reduced-phys-bits`` is used to
5849 Similar to C-bit, the value is Host family dependent. On EPYC,
5852 The ``sev-device`` provides the device file to use for
5869 The ``dh-cert-file`` and ``session-file`` provides the guest
5870 owner's Public Diffie-Hillman key defined in SEV spec. The PDH
5875 The ``kernel-hashes`` adds the hashes of given kernel/initrd/
5877 boot with -kernel. The default is off. (Since 6.2)
5881 .. parsed-literal::
5885 -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1 \\
5886 -machine ...,memory-encryption=sev0 \\
5889 ``-object authz-simple,id=id,identity=string``
5902 .. parsed-literal::
5906 …-object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,…
5912 ``-object authz-listfile,id=id,filename=path,refresh=on|off``
5946 As with the ``authz-simple`` object, the format of the identity
5953 .. parsed-literal::
5957 -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=on \\
5960 ``-object authz-pam,id=id,service=string``
5972 .. parsed-literal::
5976 -object authz-pam,id=auth0,service=qemu-vnc \\
5980 ``/etc/pam.d/qemu-vnc`` that contains:
5994 …``-object iothread,id=id,poll-max-ns=poll-max-ns,poll-grow=poll-grow,poll-shrink=poll-shrink,aio-m…
6002 reference this IOThread from ``-device ...,iothread=id``.
6006 The ``query-iothreads`` QMP command lists IOThreads and reports
6018 The ``poll-max-ns`` parameter is the maximum number of
6022 The ``poll-grow`` parameter is the multiplier used to increase
6026 The ``poll-shrink`` parameter is the divisor used to decrease
6030 The ``aio-max-batch`` parameter is the maximum number of requests
6034 The IOThread parameters can be modified at run-time using the
6035 ``qom-set`` command (where ``iothread1`` is the IOThread's
6040 (qemu) qom-set /objects/iothread1 poll-max-ns 100000