Lines Matching full:since
34 # counter may be obtained through @query-replay command (since
37 # Since: 1.3
50 # Since: 2.10
58 # Since: 2.10
72 # (since: 4.0)
76 # metadata (since: 4.0)
79 # for compat >= 1.1 (since 5.2)
84 # compat >= 1.1 (since 2.2)
86 # @refcount-bits: width of a refcount entry in bits (since 2.3)
89 # encrypted (since 2.10)
91 # @bitmaps: A list of qcow2 bitmap details (since 4.0)
93 # @compression-type: the image cluster compression method (since 5.1)
95 # Since: 1.7
122 # Since: 1.7
147 # Since: 8.0
163 # Since: 6.1
175 # Since: 8.0
185 # @luks: Since 2.7
187 # @rbd: Since 6.1
189 # @file: Since 8.0
191 # Since: 1.7
201 # Since: 1.7
211 # Since: 6.1
221 # Since: 2.7
234 # Since: 6.1
244 # Since: 8.0
257 # Since: 1.7
289 # @compressed: true if the image is compressed (Since 1.7)
300 # information (since 1.7)
302 # Since: 8.0
320 # Since: 1.3
340 # Since: 8.0
357 # Since: 8.0
398 # Since: 1.4
424 # @compressed: true if the data is stored compressed (since 8.2)
432 # backing layer could impact this region (since 6.1)
439 # Since: 2.6
457 # Since: 2.3
471 # @node-name: the name of the block driver node (Since 2.0)
487 # (since: 1.2)
491 # @detect_zeroes: detect and optimize zero writes (Since 2.1)
505 # @image: the info of image used (since: 1.6)
507 # @bps_max: total throughput limit during bursts, in bytes (Since 1.7)
509 # @bps_rd_max: read throughput limit during bursts, in bytes (Since
512 # @bps_wr_max: write throughput limit during bursts, in bytes (Since
516 # (Since 1.7)
519 # (Since 1.7)
522 # bytes (Since 1.7)
525 # seconds. (Since 2.6)
528 # in seconds. (Since 2.6)
531 # in seconds. (Since 2.6)
534 # seconds. (Since 2.6)
537 # period, in seconds. (Since 2.6)
540 # period, in seconds. (Since 2.6)
542 # @iops_size: an I/O size in bytes (Since 1.7)
544 # @group: throttle group name (Since 2.4)
546 # @cache: the cache mode used for the block device (since: 2.3)
549 # disabled. (Since 2.3)
552 # one or more dirty bitmaps) (Since 4.2)
554 # Since: 0.14
585 # Since: 1.0
594 # @name: the name of the dirty bitmap (Since 2.4)
598 # @granularity: granularity of the dirty bitmap in bytes (since 1.4)
601 # guest. (since 4.0)
605 # (since 4.0)
608 # be stored on disk, or both. (since 4.0)
613 # it, use @block-dirty-bitmap-remove. (Since 4.0)
615 # Since: 1.3
636 # Since: 4.0
652 # Since: 4.0
681 # Since: 4.0
695 # block device. (since 2.10)
716 # Since: 0.14
750 # support persistent bitmaps. (since 5.1)
752 # Since: 2.10
765 # Since: 0.14
869 # operations in the defined interval, in nanoseconds (since 8.1)
881 # operations in the defined interval, in nanoseconds (since 8.1)
893 # operations in the defined interval, in nanoseconds (since 8.1)
905 # operations in the defined interval (since 8.1).
907 # Since: 2.5
931 # devices (since 8.1)
933 # @unmap_bytes: The number of bytes unmapped by the device (Since 4.2)
942 # performed by the zoned devices (since 8.1)
945 # the device (since 0.15)
948 # device (Since 4.2)
950 # @rd_total_time_ns: Total time spent on reads in nanoseconds (since
953 # @wr_total_time_ns: Total time spent on writes in nanoseconds (since
957 # in nanoseconds (since 8.1)
960 # nanoseconds (since 0.15).
963 # nanoseconds (Since 4.2)
971 # another request (Since 2.3).
974 # another request (Since 2.3).
977 # merged into another request (since 8.1)
980 # another request (Since 4.2)
982 # @idle_time_ns: Time since the last I/O operation, in nanoseconds.
984 # operations yet (Since 2.5).
987 # performed by the device (Since 2.5)
990 # performed by the device (Since 2.5)
993 # write operations performed by the zoned devices (since 8.1)
996 # performed by the device (Since 2.5)
999 # performed by the device (Since 4.2)
1002 # performed by the device (Since 2.5)
1005 # performed by the device (Since 2.5)
1008 # operations performed by the zoned device (since 8.1)
1011 # performed by the device (Since 2.5)
1014 # performed by the device (Since 4.2)
1017 # last access statistics (Since 2.5)
1020 # latency and last access statistics (Since 2.5)
1023 # intervals of time (Since 2.5)
1025 # @rd_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
1027 # @wr_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
1030 # (since 8.1)
1032 # @flush_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
1034 # Since: 0.14
1073 # Since: 4.2
1094 # Since: 5.2
1109 # Since: 4.2
1128 # @node-name: The node name of the device. (Since 2.3)
1131 # block device. (since 3.0)
1135 # @driver-specific: Optional driver-specific stats. (Since 4.2)
1143 # (Since 2.0)
1145 # Since: 0.14
1165 # mode. (Since 2.3)
1169 # Since: 0.14
1299 # @auto: inherit the error handling policy of the backend (since: 2.7)
1301 # Since: 1.3
1319 # (since: 2.4)
1321 # @bitmap: only copy data described by the dirty bitmap. (since: 4.2)
1324 # Since: 1.3
1345 # Since: 4.2
1362 # Since: 3.0
1376 # Since: 8.2
1389 # values are allowed since QEMU 2.7
1400 # pending I/O. (Since 1.3)
1403 # itself as soon as possible. (Since 1.3)
1407 # @io-status: the status of the job (since 1.3)
1409 # @ready: true if the job may be completed (since 2.2)
1411 # @status: Current job state/status (since 2.12)
1414 # CONCLUDED state. (since 2.12)
1417 # NULL state and disappearing from the query list. (since 2.12)
1420 # Not set if the job completed successfully. (since 2.12.1)
1422 # Since: 1.1
1441 # Since: 1.1
1455 # @node-name: graph node name to get the image resized (Since 2.0)
1462 # Since: 0.14
1489 # Since: 1.1
1501 # @node-name: graph node name to generate the snapshot from (Since
1508 # @snapshot-node-name: the graph node name of the new image (Since
1531 # Since: 2.5
1557 # and 64 KiB. Default 0. (Since 9.2)
1559 # Since: 6.0
1569 # the device name will be used. (Since 2.7)
1584 # (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
1588 # provided, Must NOT be present otherwise. (Since 4.2)
1591 # (default: false) (since 2.8)
1598 # default 'report' (no limitations, since this applies to a
1605 # true. (Since 2.12)
1611 # Defaults to true. (Since 2.12)
1616 # name is autogenerated. (Since: 4.2)
1619 # copied to the target. (Since 9.1)
1621 # @x-perf: Performance options. (Since 6.0)
1631 # Since: 4.2
1659 # Since: 1.6
1672 # Since: 2.3
1686 # Since: 0.14
1715 # backing file of a destination of a blockdev-mirror. (since 5.0)
1717 # Since: 2.5
1764 # Since: 2.1
1780 # block-job-complete command after getting the ready event. (Since
1790 # the device name will be used. (Since 2.7)
1796 # (since: 3.1)
1805 # specified, this is the active layer. (since: 3.1)
1825 # valid filename or protocol. (Since 2.1)
1830 # image header will be updated (default false; since 9.0).
1835 # request should be retried. (default: report; Since: 5.0)
1840 # autogenerated. (Since: 2.9)
1846 # true. (Since 3.1)
1852 # Defaults to true. (Since 3.1)
1862 # Since: 1.3
1900 # Since: 1.6
1926 # Since: 2.3
1946 # key) if true. Default is false (Since 5.0)
1950 # Since: 2.0
2015 # Since: 4.0
2034 # Since: 4.0
2065 # Since: 4.0
2086 # Since: 4.0
2098 # Since: 4.0
2112 # Since: 4.0
2131 # Since: 1.3
2152 # the device name will be used. (Since 2.7)
2164 # @node-name: the new block driver state node name in the graph (Since
2170 # although implicitly created filters on it are kept. (Since 2.1)
2184 # between 512 and 64M (since 1.4).
2187 # (since 1.4).
2194 # default 'report' (no limitations, since this applies to a
2201 # Default is true. (Since 2.4)
2204 # 'background' (Since: 3.0)
2210 # true. (Since 3.1)
2216 # Defaults to true. (Since 3.1)
2218 # Since: 1.3
2237 # Since: 2.4
2255 # for block-dirty-bitmap-add. (Since: 2.10)
2259 # with block-dirty-bitmap-enable. Default is false. (Since: 4.0)
2261 # Since: 2.4
2275 # Since: 4.1
2290 # supported since 4.1.
2292 # Since: 4.0
2308 # Since: 2.4
2332 # Since: 2.4
2355 # Since: 2.4
2376 # Since: 4.0
2397 # Since: 4.0
2429 # Since: 4.0
2449 # Since: 2.10
2470 # Since: 2.10
2483 # the device name will be used. (Since 2.7)
2514 # default 'report' (no limitations, since this applies to a
2520 # autogenerated. (Since: 2.9)
2523 # 'background' (Since: 3.0)
2529 # true. (Since 3.1)
2535 # Defaults to true. (Since 3.1)
2537 # Since: 2.6
2566 # @id: The name or QOM path of the guest device (since: 2.8)
2580 # @bps_max: total throughput limit during bursts, in bytes (Since 1.7)
2582 # @bps_rd_max: read throughput limit during bursts, in bytes (Since
2585 # @bps_wr_max: write throughput limit during bursts, in bytes (Since
2589 # (Since 1.7)
2592 # (Since 1.7)
2595 # bytes (Since 1.7)
2599 # Defaults to 1. (Since 2.6)
2603 # Defaults to 1. (Since 2.6)
2607 # Defaults to 1. (Since 2.6)
2611 # Defaults to 1. (Since 2.6)
2615 # as well. Defaults to 1. (Since 2.6)
2619 # as well. Defaults to 1. (Since 2.6)
2621 # @iops_size: an I/O size in bytes (Since 1.7)
2623 # @group: throttle group name (Since 2.4)
2629 # Since: 1.1
2646 # Limit parameters for throttling. Since some limit combinations are
2697 # Since: 2.11
2725 # Since: 2.11
2804 # the device name will be used. (Since 2.7)
2812 # @base or @bottom is also set. (Since 2.8)
2816 # cannot be filter node. (Since 6.0)
2829 # valid filename or protocol. (Since 2.1)
2834 # image header will be updated (default false; since 9.0).
2840 # io-status (see BlockInfo). (Since 1.3)
2845 # autogenerated. (Since: 6.0)
2851 # true. (Since 3.1)
2857 # Defaults to true. (Since 3.1)
2862 # Since: 1.1
2891 # the name of the parameter), but since QEMU 2.7 it can have other
2901 # Since: 1.1
2933 # the name of the parameter), but since QEMU 2.7 it can have other
2939 # final synchronization (since 1.3)
2945 # Since: 1.1
2964 # the name of the parameter), but since QEMU 2.7 it can have other
2971 # Since: 1.3
2988 # the name of the parameter), but since QEMU 2.7 it can have other
2995 # Since: 1.3
3019 # the name of the parameter), but since QEMU 2.7 it can have other
3026 # Since: 1.3
3046 # Since: 2.12
3063 # Since: 2.12
3074 # Since: 8.2
3088 # Since: 8.2
3100 # Since: 8.2
3114 # Since: 2.9
3134 # Since: 2.1
3148 # @io_uring: Use linux io_uring (since 5.0)
3150 # Since: 2.9
3166 # Since: 2.9
3177 # @throttle: Since 2.11
3179 # @nvme: Since 2.12
3181 # @copy-on-read: Since 3.0
3183 # @blklogwrites: Since 3.0
3185 # @blkreplay: Since 4.2
3187 # @compress: Since 5.0
3189 # @copy-before-write: Since 6.2
3191 # @snapshot-access: Since 7.0
3198 # Since: 2.9
3230 # commands via SG_IO; since 2.11)
3232 # @aio: AIO backend (default: threads) (since: 2.8)
3238 # automatically. (default: 0, since 6.2)
3242 # (default: auto, since 2.10)
3247 # (default: on, since: 4.0)
3252 # (since: 3.0)
3266 # Since: 2.9
3290 # (Since 2.4)
3294 # (default: false; since: 4.1)
3296 # Since: 2.9
3314 # Since: 2.12
3334 # (since 2.4)
3338 # Since: 2.9
3352 # Since: 2.9
3363 # decryption key (since 2.6). Mandatory except when doing a
3366 # @header: block device holding a detached LUKS header. (since 9.0)
3368 # Since: 2.9
3385 # Since: 2.9
3406 # Since: 2.9
3439 # @bitmap-directory: Qcow2 bitmap directory (since 3.0)
3441 # Since: 2.9
3466 # Since: 2.9
3477 # Since: 2.10
3487 # Since: 2.10
3502 # Since: 2.10
3513 # Since: 2.10
3523 # Since: 2.10
3542 # Since: 6.0
3579 # should consider enabling this option. (since 8.1)
3582 # image, defaults to 'cached' (since 2.2)
3585 # block caches in bytes (since 2.2)
3588 # (since 2.2)
3592 # size. The default value is the cluster size (since 2.12)
3595 # in bytes (since 2.2)
3600 # this feature. (since 2.5)
3603 # except when doing a metadata-only probe of the image. (since
3609 # file name is loaded from the image file. (since 4.0)
3611 # Since: 2.9
3638 # Since: 2.12
3652 # Since: 2.12
3664 # Since: 2.12
3675 # Since: 2.12
3694 # Since: 2.9
3708 # (since 2.11)
3710 # @l1_shrink_free_l2_clusters: discard the l2 tables. (since 2.11)
3712 # @cor_write: a write due to copy-on-read (since 2.11)
3715 # (since 4.1)
3717 # @none: triggers once at creation of the blkdebug node (since 4.1)
3719 # Since: 2.9
3756 # Since: 4.1
3774 # and flush operations" (since: 4.1)
3786 # Since: 2.9
3810 # Since: 2.9
3832 # (since 2.10)
3837 # for default (since 2.10)
3842 # 2), or 0 for default (since 2.10)
3847 # default (since 2.10)
3852 # 2), or 0 for default (since 2.10)
3860 # used). Defaults to none. (since 5.0)
3864 # blkdebug node is used). Defaults to none. (since 5.0)
3866 # Since: 2.9
3897 # Since: 3.0
3915 # Since: 2.9
3928 # Since: 4.2
3942 # Since: 2.9
3959 # (Since 2.1)
3962 # (Since 2.2)
3964 # Since: 2.9
3984 # @debug: libgfapi log level (default '4' which is Error) (Since 2.8)
3986 # @logfile: libgfapi log file (default /dev/stderr) (Since 2.8)
3988 # Since: 2.9
4004 # Since: 7.2
4018 # Since: 7.2
4033 # Since: 7.2
4047 # Since: 7.2
4064 # (since 8.1)
4066 # Since: 7.2
4079 # Since: 2.9
4089 # Since: 2.9
4124 # Since: 2.9
4140 # Since: 3.0
4148 # @luks-any: Used for opening either luks or luks2 (Since 8.0)
4150 # Since: 6.1
4161 # Since: 6.1
4171 # Since: 6.1
4180 # Since: 6.1
4189 # Since: 6.1
4198 # Since: 8.0
4207 # Since: 6.1
4216 # Since: 6.1
4230 # formatted) or if its parent image is not encrypted. (Since 8.0)
4232 # Since: 6.1
4247 # Since: 6.1
4260 # @namespace: Rados namespace name in the Ceph pool. (Since 5.0)
4269 # @encrypt: Image encryption options. (Since 6.1)
4274 # to Ceph configuration option "auth_client_required". (Since
4279 # (Since 3.0)
4284 # Since: 2.9
4309 # Since: 2.9
4325 # Since: 2.9
4340 # Since: 2.9
4354 # Since: 2.9
4386 # Since: 2.9
4422 # Since: 2.9
4444 # data in a secure way. See @cookie for the format. (since 2.10)
4446 # Since: 2.9
4467 # data in a secure way. See @cookie for the format. (since 2.10)
4469 # Since: 2.9
4483 # Since: 2.9
4498 # Since: 2.9
4516 # (Since 7.0)
4522 # this option x-context would have made more sense) (since 3.0)
4529 # successful reconnect will immediately fail. Default 0 (Since
4536 # Default 0 (Since 7.0)
4542 # Since: 2.9
4562 # Since: 2.9
4578 # Since: 2.11
4596 # Since: 6.0
4616 # Since: 7.1
4640 # influence the filter. (Since 7.0)
4643 # Default is @break-guest-write. (Since 7.1)
4649 # Default 0. (Since 7.1)
4654 # (Since 9.2)
4656 # Since: 6.2
4672 # @node-name: the node name of the new node (Since 2.0). This option
4693 # node (default: false, since 3.1)
4695 # @detect-zeroes: detect and optimize zero writes (Since 2.1)
4699 # read-only=true. (Since 2.10)
4701 # Since: 2.9
4783 # Since: 2.9
4800 # @null: No block device should be referenced (since 2.10)
4802 # Since: 2.9
4814 # Since: 2.9
4899 # Since: 6.1
4914 # Since: 2.9
4954 # not adding an extent size hint (default: 1 MB, since 5.1)
4956 # Since: 2.12
4978 # Since: 2.12
4993 # @header: Block device holding a detached LUKS header. (since 9.0)
4997 # @preallocation: Preallocation mode for the new image (since: 4.2)
5000 # Since: 2.12
5018 # Since: 2.12
5035 # Since: 2.12
5056 # Since: 2.12
5072 # Since: 2.12
5086 # Since: 5.1
5100 # (since: 4.0)
5104 # metadata (default: false; since: 4.0)
5107 # (default: false; since 5.2)
5131 # (default: zlib, since 5.1)
5133 # Since: 2.12
5169 # Since: 2.12
5191 # @encrypt: Image encryption options. (Since 6.1)
5193 # Since: 2.12
5219 # Since: 4.0
5230 # Since: 4.0
5266 # (Since 6.2)
5271 # Since: 4.0
5293 # Since: 2.12
5311 # Since: 2.12
5325 # Since: 2.12
5352 # Since: 2.12
5369 # Since: 2.12
5389 # Since: 2.12
5404 # Since: 2.12
5437 # Since: 3.0
5449 # Since: 5.1
5464 # Since: 5.1
5476 # Since: 5.1
5508 # Since: 5.1
5529 # Since: 2.1
5546 # @node-name: node name (Since: 2.4)
5559 # after this event and must be repaired (Since 2.2; before, every
5572 # Since: 1.7
5587 # @qom-path: path to the device object in the QOM tree (since 9.2)
5596 # not present if the drive is empty. (Since: 2.8)
5605 # (since: 2.2)
5609 # applications) (since: 2.2)
5616 # Since: 0.13
5643 # values are allowed since QEMU 2.7
5657 # Since: 1.1
5683 # values are allowed since QEMU 2.7
5692 # Since: 1.1
5715 # values are allowed since QEMU 2.7
5721 # Since: 1.3
5744 # values are allowed since QEMU 2.7
5756 # Since: 1.3
5784 # Since: 2.12
5813 # Since: 2.2
5834 # Since: 2.3
5858 # Since: 2.3
5903 # Since: 2.7
5955 # Since: 2.12
5991 # Since: 2.6
6009 # Since: 2.0
6025 # @type: quorum operation type (Since 2.6)
6040 # Since: 2.0
6070 # Since: 1.7
6093 # Since: 1.7
6132 # Since: 1.7
6162 # Since: 8.0