docs/specs/ppc-spapr-xive.rst

13 - *Legacy Compatibility Mode*
20 - *XIVE native exploitation mode*
34 ---------------
37 property ``ibm,arch-vec-5-platform-support`` in byte 23 and the OS
38 Selection for XIVE is indicated in the ``ibm,architecture-vec-5``
43 ``ic-mode`` which can be set on the command line. It can take the
53 ---------------
80 ic-mode                            kernel_irqchip
81 --------------  ----------------------------------------------
94 ic-mode                            kernel_irqchip
95 --------------  ----------------------------------------------
105     mode (XICS), either don't set the ic-mode machine property or try
106     ic-mode=xics or ic-mode=dual``
116 ic-mode                            kernel_irqchip
117 --------------  ----------------------------------------------
131     with ``KVM is incompatible with ic-mode=dual,kernel-irqchip=on``
140 ic-mode                            kernel_irqchip
141 --------------  ----------------------------------------------
151     mode (XICS), either don't set the ic-mode machine property or try
152     ic-mode=xics or ic-mode=dual``
154     with ``KVM is incompatible with ic-mode=dual,kernel-irqchip=on``
158 ---------------------------
163 - ``device_type``
165   value should be "power-ivpe".
167 - ``compatible``
169   value should be "ibm,power-ivpe".
171 - ``reg``
173   contains the base address and size of the thread interrupt
177 - ``ibm,xive-eq-sizes``
182 - ``ibm,xive-lisn-ranges``
188 - ``ibm,plat-res-int-priorities``
194 ----------------
199 - ``0x0000 .. 0x0FFF`` 4K CPU IPIs (only used under XIVE)
200 - ``0x1000 .. 0x1000`` 1 EPOW
201 - ``0x1001 .. 0x1001`` 1 HOTPLUG
202 - ``0x1002 .. 0x10FF`` unused
203 - ``0x1100 .. 0x11FF`` 256 VIO devices
204 - ``0x1200 .. 0x127F`` 32x4 LSIs for PHB devices
205 - ``0x1280 .. 0x12FF`` unused
206 - ``0x1300 .. 0x1FFF`` PHB MSIs (dynamically allocated)
209 ---------------
238    00000000 MSI --    00000010   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... ]
239    00000001 MSI --    00000010   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... ]
240    00000002 MSI --    00000010   2/6    220/16384 @1fc2f0000 ^1 [ 80000010 ... ]
241    00000003 MSI --    00000010   3/6    201/16384 @1fc390000 ^1 [ 80000010 ... ]
242    00000004 MSI -Q  M 00000000
243    00000005 MSI -Q  M 00000000
244    00000006 MSI -Q  M 00000000
245    00000007 MSI -Q  M 00000000
246    00001000 MSI --    00000012   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... ]
247    00001001 MSI --    00000013   0/6    380/16384 @1fe3e0000 ^1 [ 80000010 ... ]
248    00001100 MSI --    00000100   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... ]
249    00001101 MSI -Q  M 00000000
250    00001200 LSI -Q  M 00000000
251    00001201 LSI -Q  M 00000000
252    00001202 LSI -Q  M 00000000
253    00001203 LSI -Q  M 00000000
254    00001300 MSI --    00000102   1/6    305/16384 @1fc230000 ^1 [ 80000010 ... ]
255    00001301 MSI --    00000103   2/6    220/16384 @1fc2f0000 ^1 [ 80000010 ... ]
256    00001302 MSI --    00000104   3/6    201/16384 @1fc390000 ^1 [ 80000010 ... ]
260 - The ``LISN`` column outputs the interrupt number of the source in
261   range ``[ 0x0 ... 0x1FFF ]`` and its type : ``MSI`` or ``LSI``
262 - The ``PQ`` column reflects the state of the PQ bits of the source :
264   - ``--`` source is ready to take events
265   - ``P-`` an event was sent and an EOI is PENDING
266   - ``PQ`` an event was QUEUED
267   - ``-Q`` source is OFF
273 - The ``EISN`` column is the event data that will be queued in the event
275 - The ``CPU/PRIO`` column is the tuple defining the CPU number and
277 - The ``EQ`` column outputs :
279   - the current index of the event queue/ the max number of entries
280   - the O/S event queue address
281   - the toggle bit
282   - the last entries that were pushed in the event queue.