Lines Matching refs:value

46 The last stored value in 'CPU selector' must refer to a possible CPU, otherwise
49 - writes to any other register are ignored until valid value is stored into it
51 On QEMU start, 'CPU selector' is initialized to a valid value, on reset it
52 keeps the current value.
60   If value last stored in 'Command field' is:
65     upper 32 bits of architecture specific CPU ID value
97   If value last stored in 'Command field' is one of:
100     contains 'CPU selector' value of a CPU with pending event[s]
102     lower 32 bits of architecture specific CPU ID value
148   value:
153     selected CPU ('CPU selector' value).
165     architecture specific CPU ID value for currently selected CPU.
175   If last stored 'Command field' value is:
178     stores value into OST event register
180     stores value into OST status register, triggers
201 #. Store 0x0 to the 'CPU selector' register, to ensure valid selector value
204    If read value is 0x0, the modern interface is enabled.
213 #. If both bit #1 and bit #2 are clear in the value read, there is no CPU
215 #. Otherwise, read the 'Command data' register. The value read is the
226    register return 'CPU selector' value of selected CPU
232 #. If the value read is not zero, goto 05.