Lines Matching refs:monitoring

19 C++ objects. These objects implement the regulator configuration and monitoring
78 Regulator monitoring is enabled during the system boot after regulators are
86 starts a timer. The timer periodically calls C++ monitoring methods on all the
91 Regulator monitoring is disabled at the beginning of system shutdown before
103 When regulator monitoring is enabled, sensor values are read once per second.
122 values are read during monitoring. This can occur in the following cases:
136 - Sensor monitoring will continue with the next Rail or Device.
137 - The sensors for this Rail will be read again during the next monitoring cycle.
145 When regulator monitoring is disabled, the following changes will be made to all
153 When regulator monitoring is enabled, phase fault detection is performed every
170   next monitoring cycle.