phosphor-regulators/config_files/Rainier.json

3         "phosphor-regulators configuration file for IBM Rainier systems"
24             "comments": ["Rule to set output voltage of a PMBus regulator"],
43                 "Rule to set output voltage of PAGE 0 of a PMBus regulator"
54                 "Rule to set output voltage of PAGE 1 of a PMBus regulator"
65                 "Rule to set output voltage of a PMBus regulator using",
99                 "Rule to set IOUT_OC_WARN_LIMIT for a PMBus regulator"
106                         "asserts at the roll-over bug identified in the",
128                         "Set VOUT_MODE to exponent of -9 for VDD regulator",
138                         "limit below 0.5V so the regulator does not trip."
149                         "limit above 1.1V so the regulator does not trip."
222                         "limit below 0.6V so the regulator does not trip."
233                         "limit above 1.0V so the regulator does not trip."
273                         "limit below 0.7V so the regulator does not trip."
284                         "limit above 1.1V so the regulator does not trip."
324                         "limit below 0.8V so the regulator does not trip."
335                         "limit above 1.0V so the regulator does not trip."
375                         "limit below 0.81V so the regulator does not trip."
386                         "limit above 0.91V so the regulator does not trip."
468                         "Note: regulator does not support VOUT_MODE, so the",
475                         "exponent": -8
481                         "Note: regulator does not support VOUT_MODE, so the",
488                         "exponent": -8
624                 "Rule to determine if the current system is a 2S4U/2S2U.",
625                 "2S systems have more regulators on the Nisqually system",
626                 "planar than 1S systems.  Must return true if system is a",
627                 "2S4U/2S2U and false if system is a 1S4U."
634                         "system planar has the value for 2S4U or 2S2U"
639                                 "fru": "system/chassis/motherboard",
646                                 "fru": "system/chassis/motherboard",
667                         "Nisqually system planar is not the value for",
674                                     "fru": "system/chassis/motherboard",
681                                     "fru": "system/chassis/motherboard",
694                 "Rule to determine if the VRM FRU for DCM-1 is present.",
702                         "Check whether the VRM FRU is present OR the DCM-1",
704                         "case the VRM presence line is not working.  If DCM-1",
710                                 "fru": "system/chassis/motherboard/vdd_vrm1",
716                                 "fru": "system/chassis/motherboard/dcm1/cpu0",
749 …                                          "fru": "system/chassis/motherboard/pcieslot8/pcie_card8",
759 …                                          "fru": "system/chassis/motherboard/pcieslot8/pcie_card8",
779                 "pass 1 regulator has a different I2C address.",
798 …                                          "fru": "system/chassis/motherboard/pcieslot9/pcie_card9",
810 …                                          "fru": "system/chassis/motherboard/pcieslot9/pcie_card9",
825 …                                          "fru": "system/chassis/motherboard/pcieslot9/pcie_card9",
832 …                                          "fru": "system/chassis/motherboard/pcieslot9/pcie_card9",
858                 "pass 1 regulator has a different I2C address.",
877 …                                        "fru": "system/chassis/motherboard/pcieslot10/pcie_card10",
889 …                                        "fru": "system/chassis/motherboard/pcieslot10/pcie_card10",
904 …                                        "fru": "system/chassis/motherboard/pcieslot10/pcie_card10",
911 …                                        "fru": "system/chassis/motherboard/pcieslot10/pcie_card10",
955 …                                        "fru": "system/chassis/motherboard/pcieslot11/pcie_card11",
965 …                                        "fru": "system/chassis/motherboard/pcieslot11/pcie_card11",
984             "inventory_path": "system/chassis",
989                         "In schematic: bus 4 (1-based), address 0xE2 (8-bit)"
993                     "fru": "system/chassis/motherboard",
1011                         "In schematic: bus 9 (1-based), address 0x36 (8-bit)",
1017                     "fru": "system/chassis/motherboard",
1029                         "In schematic: bus 4 (1-based), address 0x38 (8-bit)",
1035                     "fru": "system/chassis/motherboard",
1047                         "In schematic: bus 10 (1-based), address 0xE2 (8-bit)"
1051                     "fru": "system/chassis/motherboard/vdd_vrm0",
1070                         "In schematic: bus 10 (1-based), address 0xE0 (8-bit)"
1074                     "fru": "system/chassis/motherboard/vdd_vrm0",
1093                         "In schematic: bus 11 (1-based), address 0xE2 (8-bit)"
1097                     "fru": "system/chassis/motherboard/vdd_vrm1",
1119                         "In schematic: bus 11 (1-based), address 0xE0 (8-bit)"
1123                     "fru": "system/chassis/motherboard/vdd_vrm1",
1145                         "In schematic: bus 10 (1-based), address 0xE4 (8-bit)"
1149                     "fru": "system/chassis/motherboard",
1180                         "In schematic: bus 10 (1-based), address 0xE6 (8-bit)"
1184                     "fru": "system/chassis/motherboard",
1215                         "In schematic: bus 11 (1-based), address 0xE4 (8-bit)"
1219                     "fru": "system/chassis/motherboard",
1251                         "In schematic: bus 11 (1-based), address 0xE6 (8-bit)"
1255                     "fru": "system/chassis/motherboard",
1287                         "In schematic: bus 10 (1-based), address 0xE8 (8-bit)"
1291                     "fru": "system/chassis/motherboard",
1310                         "In schematic: bus 11 (1-based), address 0xE8 (8-bit)"
1314                     "fru": "system/chassis/motherboard",
1334                         "In schematic: bus 7 (1-based) mux channel 3,",
1335                         "address 0xEC (8-bit).",
1340                     "fru": "system/chassis/motherboard/pcieslot8/pcie_card8",
1358                         "In schematic: bus 7 (1-based) mux channel 2,",
1359                         "address 0xEC (8-bit).",
1364                     "fru": "system/chassis/motherboard/pcieslot9/pcie_card9",
1382                         "In schematic: bus 12 (1-based) mux channel 1,",
1383                         "address 0xEC (8-bit).",
1388                     "fru": "system/chassis/motherboard/pcieslot11/pcie_card11",
1406                         "In schematic: bus 12 (1-based) mux channel 0,",
1407                         "address 0xEC (8-bit).",
1412                     "fru": "system/chassis/motherboard/pcieslot10/pcie_card10",