Lines Matching full:will
24 `phosphor-power-sequencer` application will take no action.
27 device will normally change the chassis power good (pgood) signal from true to
28 false. `phosphor-power-sequencer` will isolate the failure to the power supply
29 rail. `phosphor-power-sequencer` will log a power supply error. This error will
37 The system loses all power. It will be completely off until utility power is
46 If the blackout affects all chassis, the system loses all power. It will behave
49 If the blackout only affects some chassis, the following steps will occur:
51 - The `phosphor-chassis-power` application will do the following:
56 - The `Available` property will be set to false for chassis that are
60 - If the BMC was reset by hardware due to the blackout, the following will
62 - `phosphor-power-sequencer` will read the pgood signal for each chassis and
66 will be set to 0.
67 - `phosphor-chassis-state-manager` will obtain the previous on/off state of
69 - `phosphor-chassis-state-manager` will determine if a power problem has
73 - If a power problem has occurred, `phosphor-chassis-state-manager` will do
77 again. The chassis with `Available` set to false will **not** be powered