Lines Matching full:will

59 When the system is being powered on, the `state` will be changed to 1 for the
65 that object path will change to 1. When all chassis whose `state` was set to 1
67 will change to 1.
70 `pgood` property for that chassis's object path will change to 0. The `pgood`
71 property for the system object path will remain set to 1 for a period of time.
72 Eventually the system will be powered off due to the power good fault. See
75 When the system is being powered off, the `state` will be changed to 0 for the
79 for that object path will change to 0. When all chassis have successfully
80 powered off, the `pgood` property for the system object path will change to 0.
97 property will be set.
112 - The chassis power good signal from the power sequencer will **not** be read.
114   `org.openbmc.control.Power` interface for the chassis will be set to 0.
115 - The chassis will **not** be powered on when the system is being powered on.
117   chassis will remain set to 0.
135 - The chassis power good signal from the power sequencer will **not** be read.
139     and `pgood` will be set to 0.
140   - If all other chassis have a `pgood` value of 0, the `pgood` value will be
143     will be set to 1 for this chassis.
144 - The chassis will **not** be powered on when the system is being powered on.
146   chassis will remain set to 0.
159 critical error has been detected in the chassis, and it will not be used when
164 - The chassis power good signal from the power sequencer will be read. The
166   will be set to the value of this signal.
167 - The chassis will **not** be powered on when the system is being powered on.
169   chassis will remain set to 0.
199 - The chassis power good signal from the power sequencer will **not** be read.
201   `org.openbmc.control.Power` interface for the chassis will be set to 0.
202 - The chassis will **not** be powered on when the system is being powered on.
204   chassis will remain set to 0. An error will be logged indicating that the
221 - The chassis power good signal from the power sequencer will be read. The
223   will be set to the value of this signal.
224 - The chassis will **not** be powered on when the system is being powered on.
226   chassis will remain set to 0. An error will be logged indicating that the