openpower-pels/registry/README.md

144 severity or if there are any callouts. As such, this is an optional field and if
246 [passing in the callouts via JSON](../README.md#callouts).
321 The callout fields allow one to specify the PEL callouts (either a hardware FRU,
323 These callouts can vary based on system type, as well as a user specified
327 callouts in the registry.
329 There is room for up to 10 callouts in a PEL.
331 The callouts based on system type can be added in two ways, by using either a
335 the callouts specific to that system under the `System`.
337 Suppose if multiple systems have same callouts, the `Systems` key can be used.
339 callouts common to those systems can be listed under the key.
483 This example shows that the callouts were selected based on the 'PROC_NUM'
486 in the previous example, so these callouts can also depend on the system type.
488 If it's desired to use a different set of callouts when there isn't a match on
549 #### Symbolic FRU callouts with dynamic trusted location codes