Lines Matching full:chassis

1 description: Implement to provide the chassis power management
8           The desired power transition to start on this chassis. This will be
11           - xyz.openbmc_project.State.Chassis.Error.BMCNotReady
17           A read-only property describing the current chassis power state. A
18           user can determine if a chassis is in transition by comparing the
24           A read-only property describing the current chassis power status. This
26           power coming into the chassis. Note that this is different then the
28           the chassis, not the actual state of the chassis power.
33           The last time at which the chassis power changed state, as tracked by
35           can be used to tell when the chassis was last powered on or off.
40           The desired power transition for the chassis
44                 Chassis power should be off
47                 Chassis power should be on
50                 Chassis power should be cycled from off to on. There will be a 5
55           The current state of the chassis power
59                 Chassis power is off
62                 Firmware is transitioning the chassis to an Off state
65                 Chassis power is on
68                 Firmware is transitioning the chassis to an On state
72           The current status of the chassis power
76                 Chassis power status is unknown
79                 Chassis power status is in a brownout condition.
82                 Chassis power is being provided via an uninterruptible power
92                 Chassis power status is in a good condition
97           - name: Chassis
98             value: chassis