meta-arm-bsp/documentation/juno.md

1 # Juno Development Platform Support in meta-arm-bsp
14 ```bash$ bitbake core-image-minimal```
19 tmp/deploy/images/juno/firmware-image-juno.tar.gz
21 Its content must be written on the Juno firmware SD card.
23 - insert the sdcard of the Juno in an SD card reader and mount it:
27 - erase its content and put the new one:
28 ```bash$ sudo rm -rf /mnt/*```
29 ```bash$ sudo tar --no-same-owner -xzf tmp/deploy/images/juno/firmware-image-juno.tar.gz -C /mnt/```
32 - reinsert the SD card in the Juno board
39 This partition should be initialized with the content of the filesystem
41 tmp/deploy/images/juno/core-image-minimal-juno.tar.bz2
44 - Format a USB disk, create two primary partitions (ext4).
45 - mount the secondary partition
46 - untar tmp/deploy/images/juno/core-image-minimal-juno.tar.bz2 on to the
50 You must insert the SD card and the USB drive and power-on the Juno board.
52 screen -L /dev/tty.usbserial 115200
57 - serial
58 - usb
59 - network
60 - watchdog
61 - rtc
62 - mmc
65 - i2c
66 - dma
67 - pci
68 - sata
69 - sound
72 - framebuffer: not functional
74 - GPU (no user land libraries).
75     The mali-midgard-kernel can be used to have a kernel driver