redfish/managers/test_bmc_ipv6.robot

45 Get IPv6 Address And Verify
46     [Documentation]  Get IPv6 Address And Verify.
50       Verify IPv6 On BMC  ${ipv6_network_configuration['Address']}
54 Get PrefixLength And Verify
55     [Documentation]  Get IPv6 prefix length and verify.
59       Verify IPv6 On BMC  ${ipv6_network_configuration['PrefixLength']}
63 Get IPv6 Default Gateway And Verify
64     [Documentation]  Get IPv6 default gateway and verify.
69     Verify IPv6 Default Gateway On BMC  ${ipv6_gateway}
72 Verify All Configured IPv6 And PrefixLength On BMC
73     [Documentation]  Verify IPv6 address and its prefix length on BMC.
77       Verify IPv6 And PrefixLength  ${ipv6_network_configuration['Address']}
82 Configure IPv6 Address And Verify
83     [Documentation]  Configure IPv6 address and verify.
94 Configure IPv6 Address On BMC And Verify On Both Interfaces
95     [Documentation]  Configure IPv6 address on both interfaces and verify.
105     Verify All The Addresses Are Intact  ${1}
106     Verify All The Addresses Are Intact  ${2}
109     # Verify Static IPv6 on eth0
115     # Verify Static IPv6 on eth1
122 Delete IPv6 Address And Verify
123     [Documentation]  Delete IPv6 address and verify.
131 Modify IPv6 Address And Verify
132     [Documentation]  Modify IPv6 address and verify.
142 Verify Persistency Of IPv6 After BMC Reboot
143     [Documentation]  Verify persistency of IPv6 after BMC reboot.
153     Verify IPv6 On BMC  ${test_ipv6_addr}
156 Enable SLAAC On BMC And Verify
157     [Documentation]  Enable SLAAC on BMC and verify.
160     Set SLAAC Configuration State And Verify  ${True}
163 Enable DHCPv6 Property On BMC And Verify
164     [Documentation]  Enable DHCPv6 property on BMC and verify.
167     Set And Verify DHCPv6 Property  Enabled
170 Disable DHCPv6 Property On BMC And Verify
171     [Documentation]  Disable DHCPv6 property on BMC and verify.
174     Set And Verify DHCPv6 Property  Disabled
177 Verify Persistency Of DHCPv6 On Reboot
178     [Documentation]  Verify persistency of DHCPv6 property on reboot.
181     Set And Verify DHCPv6 Property  Enabled
183     Verify DHCPv6 Property          Enabled
186 Verify Persistency Of DHCPv6 On BMC Reboot On Eth1
187     [Documentation]  Verify persistency of DHCPv6 property and
190     [Setup]  Set And Verify DHCPv6 Property  Enabled  ${2}
194     Verify DHCPv6 Property  Enabled  ${2}
196     Verify All The Addresses Are Intact  ${1}
197     Verify All The Addresses Are Intact  ${2}
201 Verify Persistency Of SLAAC On BMC Reboot On Eth0
202     [Documentation]  Verify persistency of SLAAC property on reboot on eth0.
205     Set SLAAC Configuration State And Verify  ${True}  [${HTTP_OK}]  ${1}  ${False}
207     Verify SLAAC Property          ${True}
210 Verify Persistency Of SLAAC On BMC Reboot On Eth1
211     [Documentation]  Verify persistency of SLAAC property on reboot on eth1.
214     Set SLAAC Configuration State And Verify  ${True}  [${HTTP_OK}]  ${2}  ${False}
216     Verify SLAAC Property          ${True}  ${2}
219 Configure Invalid Static IPv6 And Verify
220     [Documentation]  Configure invalid static IPv6 and verify.
230 Configure IPv6 Static Default Gateway And Verify
231     [Documentation]  Configure IPv6 static default gateway and verify.
240 Modify Static Default Gateway And Verify
241     [Documentation]  Modify static default gateway and verify.
248 Delete IPv6 Static Default Gateway And Verify
249     [Documentation]  Delete IPv6 static default gateway and verify.
256 Verify Coexistence Of Linklocalv6 And Static IPv6 On BMC
257     [Documentation]  Verify linklocalv6 And static IPv6 both exist.
265 Verify IPv6 Linklocal Address Is In Correct Format
266     [Documentation]  Verify linklocal address has network part as fe80 and
273 Verify BMC Gets SLAAC Address On Enabling SLAAC
274     [Documentation]  On enabling SLAAC verify SLAAC address comes up.
276     [Setup]  Set SLAAC Configuration State And Verify  ${False}
278     Set SLAAC Configuration State And Verify  ${True}
283 Verify Enable And Disable SLAAC On Both Interfaces
284     [Documentation]  Verify enable and disable SLAAC on both the interfaces.
287     [Template]  Set And Verify SLAAC Property On Both Interfaces
288     [Teardown]  Run Keywords  Set SLAAC Configuration State And Verify  ${slaac_channel_1}  [${HTTP_OK}]  ${1}
289     ...  AND  Set SLAAC Configuration State And Verify  ${slaac_channel_2}  [${HTTP_OK}]  ${2}
303     [Template]  Set And Verify DHCPv6 Property On Both Interfaces
304     [Teardown]  Run Keywords  Set And Verify DHCPv6 Property  ${dhcpv6_channel_1}  ${1}  AND
305     ...  Set And Verify DHCPv6 Property  ${dhcpv6_channel_2}  ${2}
314 Verify Autoconfig Is Present On Ethernet Interface
315     [Documentation]  Verify autoconfig is present on ethernet interface.
322 Verify Interface ID Of SLAAC And LinkLocal Addresses Are Same
335 Verify Persistency Of Link Local IPv6 On BMC Reboot
336     [Documentation]  Verify persistency of link local on BMC reboot.
354 Modify MAC and Verify BMC Reinitializing Linklocal
355     [Documentation]  Modify MAC and verify BMC reinitializing linklocal.
368     # Verify whether the linklocal has changed and is in the the correct format.
373 Add Multiple IPv6 Address And Verify
374     [Documentation]  Add multiple IPv6 address and verify.
383 Verify Coexistence Of Static IPv6 And SLAAC On BMC
384     [Documentation]  Verify static IPv6 And SLAAC both coexist.
387              Set SLAAC Configuration State And Verify  ${True}
395 Verify Coexistence Of Link Local And DHCPv6 On BMC
396     [Documentation]  Verify link local And dhcpv6 both coexist.
405 Verify Coexistence Of Link Local And SLAAC On BMC
406     [Documentation]  Verify link local And SLAAC both coexist.
408     [Setup]  Set SLAAC Configuration State And Verify  ${True}
415 Verify Coexistence Of All IPv6 Type Addresses On BMC
416     [Documentation]  Verify coexistence of link local, static, DHCPv6 and SLAAC ipv6 addresses.
420     ...      AND  Set And Verify DHCPv6 Property  Enabled
422     ...      AND  Set SLAAC Configuration State And Verify  ${True}
424     ...         AND  Set And Verify DHCPv6 Property  ${dhcpv6_channel_1}  ${1}
425     ...         AND  Set SLAAC Configuration State And Verify  ${slaac_channel_1}  [${HTTP_OK}]  ${1}
429     # Verify link local, static, DHCPv6 and SLAAC ipv6 addresses coexist.
430     Verify The Coexistence Of The Address Type  LinkLocal  Static  DHCPv6  SLAAC
433 Configure Link Local IPv6 Address And Verify
434     [Documentation]  Configure link local IPv6 address and verify.
439     # Verify the address origin contains link local.
448 Configure Valid IPv6 Address And Verify
449     [Documentation]  Configure valid IPv6 address and verify it is getting added as expected format.
464 Verify Coexistence Of IPv6 Addresses Type Combination On BMC
465     [Documentation]  Verify coexistence of IPv6 addresses type combination on BMC.
471     ...    Set And Verify DHCPv6 Property  ${dhcpv6_channel_1}  ${1}
472     ...    AND  Set SLAAC Configuration State And Verify  ${slaac_channel_1}  [${HTTP_OK}]  ${1}
473     [Template]  Verify IPv6 Addresses Coexist
482 Verify Eth0 Static IPv4 Functions Properly In The Presence Of DHCPv6
483     [Documentation]  Verify eth0 static IPv4 functions properly in the presence of DHCPv6.
485     [Setup]  Set And Verify DHCPv6 Property  Enabled
487     # Verify that on enabling DHCPv6 other configurations are not impacted.
491     Verify All The Addresses Are Intact  ${1}
492     Verify All The Addresses Are Intact  ${2}
496 Disable And Verify AutoConfig On Both Interfaces When AutoConfig Enabled
500     [Setup]  Set And Verify SLAAC Property On Both Interfaces  ${True}  ${True}
501     [Template]  Set And Verify SLAAC Property On Both Interfaces
507 Verify Eth1 DHCPv4 Functions Properly In The Presence Of Static IPv6
508     [Documentation]  Verify eth1 dhcpv4 functions properly in the presence of Static IPv6.
514     # Verify presence of static IPv6 address and origin.
520     # Verify eth1 DHCPv4 is enabled.
524     # Verify presence of DHCPv4 address origin.
530     # Verify static is not present in address origin when DHPCv4 enabled.
674 Verify IPv6 And PrefixLength
675     [Documentation]  Verify IPv6 address and prefix length on BMC.
688     # Verify if IPv6 and prefix length is configured on BMC.
741     # Verify ip address on CLI.
743         Verify IPv6 And PrefixLength  ${ipv6_addr2}  ${prefix_len}
745         Verify IPv6 And PrefixLength  ${ipv6_addr1}  ${prefix_len}
748     # Verify if existing static IPv6 addresses still exist.
750       Verify IPv6 On BMC  ${ipv6_network_configuration['Address']}
753     #Verify redfish and CLI data matches.
802     # Verify newly added ip address on CLI.
804       Verify IPv6 And PrefixLength  ${ipv6_addr}  ${prefix_len}
807     # Verify if existing static IPv6 addresses still exist.
809       Verify IPv6 On BMC  ${ipv6_network_configuration['Address']}
815     # Verify newly added ip address on BMC.
878     ${delete_status}=  Run Keyword And Return Status  Verify IPv6 On BMC  ${ipv6_addr}
889     [Documentation]  Modify and verify IPv6 address of BMC.
984     # Verify if new IPv6 address is configured on BMC.
985     Verify IPv6 On BMC  ${new_ipv6}
987     # Verify if old IPv6 address is erased.
989     ...  Verify IPv6 On BMC  ${ipv6}
995 Set SLAAC Configuration State And Verify
1013         Verify SLAAC Property  ${slaac_state}  ${channel_number}
1017 Verify SLAAC Property
1018     [Documentation]  Verify SLAAC property.
1025     # Verify SLAAC is set correctly.
1034 Set And Verify DHCPv6 Property
1035     [Documentation]  Set DHCPv6 property and verify.
1043     Verify DHCPv6 Property  ${dhcpv6_operating_mode}  ${channel_number}
1061 Verify DHCPv6 Property
1062     [Documentation]  Verify DHCPv6 settings is enabled or disabled.
1140     # Verify the added static default gateway is present in Redfish Get Output.
1157     [Documentation]  Modify and verify IPv6 address of BMC.
1206     # Verify if old static default gateway address is erased.
1257     [Documentation]  Verify both linklocalv6 and static IPv6 exist.
1259     # Verify the address origin contains static and linklocal.
1267     [Documentation]  Verify both static IPv6 and SLAAC coexist.
1269     # Verify the address origin contains static and slaac.
1278     [Documentation]  Verify both link local and SLAAC coexist.
1280     # Verify the address origin contains SLAAC and link local.
1291     [Documentation]  Verify both link local and dhcpv6 coexist.
1293     # Verify the address origin contains dhcpv6 and link local.
1319     # Verify the linklocal obtained is the same as on the machine.
1398 Verify All The Addresses Are Intact
1399     [Documentation]  Verify all the addresses and address origins remain intact.
1409     # Verify that it will not impact the IPv4 configuration.
1467 Set And Verify SLAAC Property On Both Interfaces
1468     [Documentation]  Set and verify SLAAC property on both interfaces.
1475     Set SLAAC Configuration State And Verify  ${slaac_value_1}  [${HTTP_OK}]  ${1}
1476     Set SLAAC Configuration State And Verify  ${slaac_value_2}  [${HTTP_OK}]  ${2}
1498     Verify All The Addresses Are Intact  ${1}
1499     Verify All The Addresses Are Intact  ${2}
1503 Set And Verify DHCPv6 Property On Both Interfaces
1504     [Documentation]  Set and verify DHCPv6 property on both interfaces.
1511     Set And Verify DHCPv6 Property  ${dhcpv6_value_1}  ${1}
1512     Set And Verify DHCPv6 Property  ${dhcpv6_value_2}  ${2}
1514     Verify All The Addresses Are Intact  ${1}
1515     Verify All The Addresses Are Intact  ${2}
1519 Verify IPv6 Addresses Coexist
1520     [Documentation]  Verify IPv6 address type coexist.
1530         Set And Verify DHCPv6 Property  Enabled
1532         Set And Verify DHCPv6 Property  Enabled
1533         Set SLAAC Configuration State And Verify  ${True}
1536         Set SLAAC Configuration State And Verify  ${True}
1544     # Verify coexistence.
1545     Verify The Coexistence Of The Address Type  ${ipv6_address_type1}  ${ipv6_address_type2}
1554     Set And Verify DHCPv6 Property  Disabled
1555     Set SLAAC Configuration State And Verify  ${False}