redfish/extended/test_power_capping.robot

2 Documentation     Energy scale power capping tests.
6 #  PL     Power Limit
35     [Documentation]  Change active power limit with system power on and
36     ...  Power limit active.
39     Set DCMI Power Limit And Verify  ${max_power}
41     Redfish Power On  stack_mode=skip
67     ${power}=  Get DCMI Power Limit
68     Should Be True  ${power} == ${max_power}
69     ...  msg=DCMI power limit should be ${max_power}.
71     Activate DCMI Power And Verify
73     Set DCMI Power Limit And Verify  ${near_max_power_50}
77     [Documentation]  Change active power limit with system power on and
78     ...  deactivate power limit prior to change.
83     Redfish Power On  stack_mode=skip
85     Set DCMI Power Limit And Verify  ${power_setting}
88     Deactivate DCMI Power And Verify
90     ${cmd}=  Catenate  dcmi power set_limit limit ${near_max_power_50}
92     ${power}=  Get DCMI Power Limit
94     Should Be True  ${power} == ${near_max_power_50}
95     ...  msg=Could not set power limit when power limiting deactivated.
99     [Documentation]  Set power limit and activate power limit before
100     ...  BMC state is power on.
105     Redfish Power On  stack_mode=skip
107     Set DCMI Power Limit And Verify  ${power_setting}
108     Deactivate DCMI Power And Verify
110     ${power}=  Get DCMI Power Limit
111     Should Be True  ${power} == ${power_setting}
112     ...  msg=dcmi power limit not set to ${power_setting} as expected.
114     Smart Power Off
116     Activate DCMI Power And Verify
118     Redfish Power On
120     ${power}=  Get DCMI Power Limit
121     Should Be True  ${power} == ${power_setting}
122     ...  msg=Power limit setting of watts not retained at Runtime.
124     Deactivate DCMI Power And Verify
128     [Documentation]  Set and activate power limit with system power off.
133     Set DCMI Power Limit And Verify  ${power_setting}
134     Deactivate DCMI Power and Verify
136     Smart Power Off
138     # Check deactivated and the power limit.
139     Fail If DCMI Power Is Not Deactivated
140     ${power}=  Get DCMI Power Limit
141     Should Be True  ${power} == ${power_setting}
142     ...  msg=DCMI power not set at ${power_setting} as expected
144     Activate DCMI Power And Verify
145     Set DCMI Power Limit And Verify  ${power_setting}
147     Redfish Power On
149     Fail If DCMI Power Is Not Activated
151     ${power}=  Get DCMI Power Limit
152     Should Be True  ${power} == ${power_setting}
153     ...  msg=Power limit setting not retained at Runtime.
157     [Documentation]  Change power limit at runtime.
162     Set DCMI Power Limit And Verify  ${near_max_power_50}
164     Smart Power Off
166     Redfish Power On  stack_mode=skip
168     Set DCMI Power Limit And Verify  ${power_setting}
170     # Check that DCMI power limit setting = ${power_setting}.
171     ${power}=  Get DCMI Power Limit
172     Should Be True  ${power} == ${power_setting}
173     ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
175     Set DCMI Power Limit And Verify  ${max_power}
179     [Documentation]  Disable/enable power limit at runtime.
184     Smart Power Off
186     Set DCMI Power Limit And Verify  ${power_setting}
187     Activate DCMI Power And Verify
189     # Power on the system.
190     Redfish Power On
192     # Check that DCMI power limit setting = ${power_setting}.
193     ${power}=  Get DCMI Power Limit
194     Should Be True  ${power} == ${power_setting}
195     ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
197     Deactivate DCMI Power And Verify
199     Activate DCMI Power And Verify
201     ${power}=  Get DCMI Power Limit
202     Should Be True  ${power} == ${power_setting}
203     ...  msg=DCMI power limit not set to ${power_setting} watts as expected.
211     #  Power Off if system if not already off.
213     #  Deactivate power and set limit.
215     Smart Power Off
218     ${cmd}=  Catenate  dcmi power get_limit | grep State
220     # Response is either "Power Limit Active" or "No Active Power Limit".
225     # Save the power limit setting.
226     ${initial_power_setting}=  Get DCMI Power Limit
229     # Set power limiting deactivated.
230     Deactivate DCMI Power And Verify
232     # Set initial power setting value.
233     Set DCMI Power Limit And Verify  ${max_power}
239     # Power off the OS and wait for power off state.
241     # Return the system's initial power limit setting.
245     Smart Power Off
248     ...  Set DCMI Power Limit And Verify  ${initial_power_setting}
251     ...  Deactivate DCMI Power And Verify  ELSE  Activate DCMI Power And Verify