Lines Matching refs:power
28 # The power limits are documented in
29 # open-power/witherspoon-xml/master/witherspoon.xml.
36 [Documentation] Run base power tests with DCMI power monitoring off.
44 [Documentation] Run base power tests with DCMI power monitoring on.
52 [Documentation] Set power via REST and check using IPMI.
55 # A convenient power level bewtwwn maximum and minimum.
58 # Set the power limit via REST.
61 # Read the power limit using IPMI.
68 [Documentation] Set power via IPMI then check via REST.
71 # A convenient power level bewtwwn maximum and minimum.
80 ... msg=Reading power limit with REST failed after setting it with IPMI.
84 [Documentation] Activate power monitoring via REST then check via IPMI.
93 [Documentation] Deactivate power monitoring via REST and check via IPMI.
105 [Documentation] Set power levels and verify limits.
118 [Documentation] Set power and check limit.
122 # good_power A valid power setting, usually at a limit.
123 # outside_bounds_power A power level that is beyond the limit.
127 # Attempt set power limit out of range.
139 ${cmd}= Catenate dcmi power get_limit | grep State
146 # Save the power limit setting.
158 # Restore the system's initial power limit setting.