Lines Matching refs:reading
25 [Documentation] Verify temperatures from IPMI sensor reading command using Redfish.
35 [Documentation] Verify temperatures from DCMI sensor reading command using Redfish.
86 [Documentation] Verify power reading via IPMI with host in off state
94 ... msg=Power reading not zero when power is off.
98 [Documentation] Test power reading via IPMI with host in booted state and
147 [Documentation] Test power reading via IPMI raw command and verify
207 [Documentation] Get IPMI or DCMI sensor reading and verify in Redfish.
212 # sensor_id Sensor id used to get reading in IPMI or DCMI.
233 # sensor_id Sensor id used to get reading in IPMI.
239 ${data}= Run IPMI Standard Command sensor reading ${ids}
241 # Example reading:
257 # sensor_id Sensor id used to get reading in DCMI.
263 # Example reading:
282 [Documentation] Get temperature reading from Redfish.
309 ${reading}= Set Variable ${data}[Reading]
311 ... Set To Dictionary ${redfish_value_dict} ${data}[DeviceName] ${reading}
318 [Documentation] Verify power reading using IPMI and Redfish.
320 # Example of power reading command output via IPMI.
321 # Instantaneous power reading: 235 Watts
324 # Average power reading over sample period: 235 Watts
327 # Power reading state is: deactivated
336 ... msg=Power reading above allowed threshold ${allowed_power_diff}.
340 [Documentation] Get dcmi power reading via IPMI raw command.
349 # Example of power reading via Redfish
363 ... msg=Power reading above allowed threshold ${allowed_power_diff}.