639 	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",  in xhci_shutdown()
801 			xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",  in xhci_disable_hub_port_wake()
874 	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",  in xhci_suspend()
1052 		xhci_dbg(xhci, "Stop HCD\n");  in xhci_resume()
1060 		xhci_dbg(xhci, "// Disabling event ring interrupts\n");  in xhci_resume()
1065 		xhci_dbg(xhci, "cleaning up memory\n");  in xhci_resume()
1068 		xhci_dbg(xhci, "xhci_stop completed - status = %x\n",  in xhci_resume()
1075 		xhci_dbg(xhci, "Initialize the xhci_hcd\n");  in xhci_resume()
1081 		xhci_dbg(xhci, "Start the primary HCD\n");  in xhci_resume()
1084 			xhci_dbg(xhci, "Start the secondary HCD\n");  in xhci_resume()
1163 	xhci_dbg(xhci, "%s: starting usb%d port polling.\n",  in xhci_resume()
1278 			xhci_dbg(hcd_to_xhci(hcd),  in xhci_unmap_temp_buf()
1400 			xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",  in xhci_check_args()
1407 			xhci_dbg(xhci, "xHCI %s called with udev and "  in xhci_check_args()
1528 		xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");  in xhci_urb_enqueue()
1570 		xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",  in xhci_urb_enqueue()
1799 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);  in xhci_drop_endpoint()
1802 		xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",  in xhci_drop_endpoint()
1841 	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",  in xhci_drop_endpoint()
1892 		xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",  in xhci_add_endpoint()
1955 	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",  in xhci_add_endpoint()
2910 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);  in xhci_check_bandwidth()
3002 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);  in xhci_reset_bandwidth()
3061 		xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",  in xhci_endpoint_disable()
3159 		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",  in xhci_endpoint_reset()
3190 		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",  in xhci_endpoint_reset()
3264 		xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",  in xhci_calculate_streams_entries()
3293 			xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",  in xhci_calculate_streams_and_bitmask()
3387 	xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",  in xhci_alloc_streams()
3393 		xhci_dbg(xhci, "xHCI controller does not support streams.\n");  in xhci_alloc_streams()
3443 	xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",  in xhci_alloc_streams()
3494 		xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",  in xhci_alloc_streams()
3682 		xhci_dbg(xhci, "The device to be reset with slot ID %u does "  in xhci_discover_or_reset_device()
3699 		xhci_dbg(xhci, "The device to be reset with slot ID %u does "  in xhci_discover_or_reset_device()
3717 	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);  in xhci_discover_or_reset_device()
3726 		xhci_dbg(xhci, "Couldn't allocate command structure.\n");  in xhci_discover_or_reset_device()
3735 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");  in xhci_discover_or_reset_device()
3758 		xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",  in xhci_discover_or_reset_device()
3761 		xhci_dbg(xhci, "Not freeing device rings.\n");  in xhci_discover_or_reset_device()
3766 		xhci_dbg(xhci, "Successful reset device command.\n");  in xhci_discover_or_reset_device()
3952 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");  in xhci_alloc_dev()
4076 			xhci_dbg(xhci, "Slot already in default state\n");  in xhci_setup_device()
4411 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",  in xhci_set_usb2_hardware_lpm()
5030 		xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");  in xhci_update_hub_device()
5051 		xhci_dbg(xhci, "xHCI version %x needs hub "  in xhci_update_hub_device()
5069 		xhci_dbg(xhci, "xHCI version %x doesn't need hub "  in xhci_update_hub_device()
5076 	xhci_dbg(xhci, "Set up %s for hub device.\n",  in xhci_update_hub_device()
5219 	xhci_dbg(xhci, "Resetting HCD\n");  in xhci_gen_setup()
5224 	xhci_dbg(xhci, "Reset complete\n");  in xhci_gen_setup()
5240 		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");  in xhci_gen_setup()
5250 		xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");  in xhci_gen_setup()
5254 	xhci_dbg(xhci, "Calling HCD init\n");  in xhci_gen_setup()
5259 	xhci_dbg(xhci, "Called HCD init\n");  in xhci_gen_setup()