Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/usb/gadget/udc/Kconfig

5 #    (b) the gadget driver using it.
42 	   Say "y" to link the driver statically, or "m" to build a
54 	   Say "y" to link the driver statically, or "m" to build a
66 	  fifo_mode = 0 is used to let the driver autoconfigure the endpoints.
88 	   Say "y" to link the driver statically, or "m" to build a
101 	   Say "y" to link the driver statically, or "m" to build a
109 	   Faraday usb device controller FUSB300 driver
124 	   endpoints (plus endpoint zero).  This driver supports the
128 	   Say "y" to link the driver statically, or "m" to build a
144 	   Say "y" to link the driver statically, or "m" to build a
148 # if there's only one gadget driver, using only two bulk endpoints,
166 	   Say "y" to link the driver statically, or "m" to build a
178 	   Say "y" to link the driver statically, or "m" to build a
189 	   Say "y" to link the driver statically, or "m" to build a
202 	   Say "y" to link the driver statically, or "m" to build a
213 	   Say "y" to link the driver statically, or "m" to build a
227 	   Say "y" to link the driver statically, or "m" to build a
251 	  This enables core driver support for Synopsys USB 2.0 Device
254 	  This will be enabled when PCI or Platform driver for this UDC is
271 	  This driver works with UDCs integrated into Broadcom's Northstar2
287 	   Say "y" to link the driver statically, or "m" to build a
309 	   CONFIG_USB_SNP_CORE option to build the core driver.
311 	   Say "y" to link the driver statically, or "m" to build a
322 	   programmable endpoints. This driver supports the
326 	   Set CONFIG_USB_GADGET to "m" to build this driver as a
338 	  Say "y" to link the driver statically, or "m" to build a
348 	  driver itself.
350 	  If unsure, say "N" here.  The driver works fine in PIO mode.
373 	   Say "y" to link the driver statically, or "m" to build a
387 	   Say "y" to link the driver statically, or "m" to build a
395 	  This is a USB device driver for EG20T PCH.
400 	  This driver enables USB device function.
403 	  This driver supports both control transfer and bulk transfer modes.
404 	  This driver dose not support interrupt transfer or isochronous
407 	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
413 	  This driver can be used with Intel's Quark X1000 SOC platform
420 	  USB peripheral controller driver for Xilinx USB2 device.
426 	  Say "y" to link the driver statically, or "m" to build a
437 	  To compile this driver as a module, choose M here: the module will
445 	 Enables NVIDIA Tegra USB 3.0 device mode controller driver.
447 	 Say "y" to link the driver statically, or "m" to build a
452 	tristate "Aspeed UDC driver support"
456 	  Enables Aspeed USB2.0 Device Controller driver for AST260x
460 	  Say "y" to link the driver statically, or "m" to build a
476 	  This host controller driver emulates USB, looping all data transfer
477 	  requests back to a USB "gadget driver" in the same host.  The host
482 	  This may help in some stages of creating a driver to embed in a
484 	  driver without its hardware or drivers being involved.
486 	  Since such a gadget side driver needs to interoperate with a host
487 	  side Linux-USB device driver, this may help to debug both sides
490 	  Say "y" to link the driver statically, or "m" to build a