Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/usb/gadget/udc/Kconfig

1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 #  - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 #   - integrated/SOC controllers first
23 #   - licensed IP used in both SOC and discrete versions
24 #   - discrete ones (including all PCI-only controllers)
25 #   - debug/dummy gadget+hcd is last.
43 	   dynamically linked module called "at91_udc" and force all
55 	   dynamically linked module called "lpc32xx_udc" and force all
62 	  USBA is the integrated high-speed USB Device controller on some
65 	  The fifo_mode parameter is used to select endpoint allocation mode.
68 	  mode and only 1 bank otherwise. For the rest of the endpoints
72 	  allowing the usage of ep1 - ep6
75 	  configuration allowing the usage of ep1 - ep3
78 	  the usage of ep1 - ep8
96 	   Dual-Role(DR) USB controller, which supports device mode.
102 	   dynamically linked module called "fsl_usb2_udc" and force
129 	   dynamically linked module called "omap_udc" and force all
137 	   Intel's PXA 25x series XScale ARM-5TE processors include
139 	   controller in the IXP 4xx series is register-compatible.
141 	   It has fifteen fixed-function endpoints, as well as endpoint
145 	   dynamically linked module called "pxa25x_udc" and force all
167 	   dynamically linked module called "r8a66597_udc" and force all
179 	   dynamically linked module called "renesas_usbhs" and force all
203 	   dynamically linked module called "renesas_usb3" and force all
214 	   dynamically linked module called "renesas_usbf" and force all
228 	   dynamically linked module called "pxa27x_udc" and force all
288 	   dynamically linked module called "m66592_udc" and force all
312 	   dynamically linked module called "amd5536udc" and force all
321 	   QE/CPM2 USB controller, which support device mode with 4
339 	  dynamically linked module called "net2272" and force all
350 	  If unsure, say "N" here.  The driver works fine in PIO mode.
374 	   dynamically linked module called "net2280" and force all
378 	tristate "Toshiba TC86C001 'Goku-S'"
388 	   dynamically linked module called "goku_udc" and to force all
408 	  for IVI(In-Vehicle Infotainment) use.
427 	  dynamically linked module called "udc-xilinx" and force all
431 	tristate "MAX3420 (USB-over-SPI) support"
434 	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
445 	 Enables NVIDIA Tegra USB 3.0 device mode controller driver.
448 	 dynamically linked module called "tegra_xudc" and force all
461 	  dynamically linked module called "aspeed_udc" and force all
464 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
469 # LAST -- dummy/emulated controller
487 	  side Linux-USB device driver, this may help to debug both sides
491 	  dynamically linked module called "dummy_hcd" and force all