Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/usb/gadget/udc/Kconfig

1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 #  - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
21 # before discrete ones so they will be the initial/default value:
22 #   - integrated/SOC controllers first
23 #   - licensed IP used in both SOC and discrete versions
24 #   - discrete ones (including all PCI-only controllers)
25 #   - debug/dummy gadget+hcd is last.
42 	   Say "y" to link the driver statically, or "m" to build a
54 	   Say "y" to link the driver statically, or "m" to build a
62 	  USBA is the integrated high-speed USB Device controller on some
72 	  allowing the usage of ep1 - ep6
75 	  configuration allowing the usage of ep1 - ep3
78 	  the usage of ep1 - ep8
88 	   Say "y" to link the driver statically, or "m" to build a
96 	   Dual-Role(DR) USB controller, which supports device mode.
101 	   Say "y" to link the driver statically, or "m" to build a
128 	   Say "y" to link the driver statically, or "m" to build a
137 	   Intel's PXA 25x series XScale ARM-5TE processors include
139 	   controller in the IXP 4xx series is register-compatible.
141 	   It has fifteen fixed-function endpoints, as well as endpoint
144 	   Say "y" to link the driver statically, or "m" to build a
153 	default n if USB_ETH_RNDIS
154 	default y if USB_ZERO
155 	default y if USB_ETH
156 	default y if USB_G_SERIAL
166 	   Say "y" to link the driver statically, or "m" to build a
178 	   Say "y" to link the driver statically, or "m" to build a
189 	   Say "y" to link the driver statically, or "m" to build a
202 	   Say "y" to link the driver statically, or "m" to build a
213 	   Say "y" to link the driver statically, or "m" to build a
227 	   Say "y" to link the driver statically, or "m" to build a
266 	default ARCH_BCM_IPROC
287 	   Say "y" to link the driver statically, or "m" to build a
309 	   CONFIG_USB_SNP_CORE option to build the core driver.
311 	   Say "y" to link the driver statically, or "m" to build a
326 	   Set CONFIG_USB_GADGET to "m" to build this driver as a
338 	  Say "y" to link the driver statically, or "m" to build a
373 	   Say "y" to link the driver statically, or "m" to build a
378 	tristate "Toshiba TC86C001 'Goku-S'"
382 	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
387 	   Say "y" to link the driver statically, or "m" to build a
398 	  Using this interface, it is able to access system devices connected
408 	  for IVI(In-Vehicle Infotainment) use.
426 	  Say "y" to link the driver statically, or "m" to build a
427 	  dynamically linked module called "udc-xilinx" and force all
431 	tristate "MAX3420 (USB-over-SPI) support"
434 	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
447 	 Say "y" to link the driver statically, or "m" to build a
460 	  Say "y" to link the driver statically, or "m" to build a
464 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
469 # LAST -- dummy/emulated controller
484 	  driver without its hardware or drivers being involved.
487 	  side Linux-USB device driver, this may help to debug both sides
490 	  Say "y" to link the driver statically, or "m" to build a
495 # first and will be selected by default.