Lines Matching +full:milbeaut +full:- +full:usio +full:- +full:uart
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
136 This enables the driver for the on-chip UARTs of the Atmel
145 Say Y here if you wish to use an on-chip UART on a Atmel
180 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
206 This enables the driver for the on-chip UARTs of the Amlogic
215 Say Y here if you wish to use a Amlogic MesonX UART as the
226 This enables the driver for the on-chip UARTs of the Cirrus
244 Support for the on-chip UARTs on the Samsung
256 Select the number of available UART ports for the Samsung S3C
265 Allow selection of the S3C24XX on-board serial ports for use as
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
287 tristate "NVIDIA Tegra Combined UART"
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
323 This selects support for an advanced UART from Maxim (Dallas).
326 that can be controlled through I2C or high-speed SPI.
336 DZ11-family serial controllers for DECstations and VAXstations,
680 bool "Enable LPC32XX high speed UART serial console"
741 the pmac_zilog and 8250 drivers to co-exist, but may cause
743 access the built-in serial ports on powermacs will need to
748 unable to use the 8250 module for PCMCIA or other 16C550-style
776 Say Y here if you wish to use a SCC or SMC CPM UART as the system
880 box, for instance in order to become a dial-in server. This driver
889 tristate "MSM on-chip serial port support"
900 tristate "QCOM on-chip GENI based serial port support"
915 bool "VIA VT8500 on-chip serial port support"
933 with the omap-serial driver. DMA support can be enabled from platform
952 tristate "SiFive UART support"
958 contains a SiFive UART IP block. This type of UART is present on
962 bool "Console on SiFive UART"
968 Select this option if you would like to use a SiFive UART as the
983 Support for UART on Lantiq and Intel SoCs.
988 bool "Console on Lantiq UART"
993 Select this option if you would like to use a Lantiq UART as the
1009 This selects support for an advanced UART from NXP (Philips).
1058 tristate "Support for timberdale UART"
1062 Add support for UART controller on timberdale.
1065 tristate "Broadcom BCM63xx/BCM33xx UART support"
1070 This enables the driver for the onchip UART core found on
1076 BCM7xxx (STB) - DOCSIS console
1102 tristate "Altera JTAG UART support"
1105 This driver supports the Altera JTAG UART port.
1108 bool "Altera JTAG UART console support"
1113 Enable a Altera JTAG UART port to be the system console.
1124 tristate "Altera UART support"
1127 This driver supports the Altera softcore UART port.
1130 int "Maximum number of Altera UART ports"
1135 UART ports. The usual default varies from board to board, and
1139 int "Default baudrate for Altera UART ports"
1144 Altera UART ports. The usual default varies from board to board,
1148 bool "Altera UART console support"
1153 Enable a Altera UART port to be the system console.
1156 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1160 This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1162 Enabling PCH_DMA, this PCH UART works as DMA mode.
1166 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1172 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1176 Say Y here if you wish to use the PCH UART as the system console
1187 UART (AUART) port.
1197 tristate "Cadence (Xilinx Zynq) UART support"
1201 This driver supports the Cadence UART. It is found e.g. in Xilinx
1205 bool "Cadence UART console support"
1210 Enable a Cadence UART port to be the system console.
1219 built-in UART of the SoC, say Y to this option.
1229 Enable a built-in UART port of the AR933X to be the system console.
1240 bool "MPS2 UART console support"
1246 bool "MPS2 UART port"
1250 This driver support the UART ports on ARM MPS2.
1253 tristate "ARC UART driver support"
1256 Driver for on-chip UART for ARC(Synopsys) for the legacy
1260 bool "Console on ARC UART"
1265 Enable system Console on ARC UART
1268 int "Number of ARC UART ports"
1305 Support for the on-chip lpuart on some Freescale SOCs.
1317 tristate "Freescale LINFlexD UART serial port support"
1321 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1324 bool "Console on Freescale LINFlexD UART serial port"
1329 If you have enabled the LINFlexD UART serial port on the Freescale
1337 Support for the on-chip USART on Conexant Digicolor SoCs.
1352 This driver is for the on-chip Asynchronous Serial Controller on
1369 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1383 bool "Spreadtrum UART console support"
1399 This driver is for the on-chip Serial Controller on
1418 This driver is for Marvell EBU SoC's UART. If you have a machine
1419 based on the Armada-3700 SoC and wish to use the on-board serial
1431 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1441 This driver is for Actions Semiconductor S500/S900 SoC's UART.
1442 Say 'Y' here if you wish to use the on-board serial port.
1452 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1460 This driver is for RDA8810PL SoC's UART.
1461 Say 'Y' here if you wish to use the on-board serial port.
1471 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1475 tristate "Milbeaut USIO/UART serial port support"
1480 This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
1483 int "Maximum number of CSIO/UART ports (1-8)"
1489 bool "Support for console on MILBEAUT USIO/UART serial port"
1495 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
1507 This driver is for the FPGA-based LiteUART serial controller from LiteX
1527 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1534 tristate "Sunplus UART support"
1543 called sunplus-uart.
1546 bool "Console on Sunplus UART"
1551 Select this option if you would like to use a Sunplus UART as the
1559 tristate "Nuvoton MA35D1 family UART support"
1563 This driver supports Nuvoton MA35D1 family UART ports. If you would
1570 bool "Console on a Nuvotn MA35D1 family UART port"
1574 Select this options if you'd like to use the UART port0 of the