Lines Matching +full:system +full:- +full:on +full:- +full:chip
1 # SPDX-License-Identifier: GPL-2.0
7 depends on HAS_IOMEM
11 depends on SERIAL_CORE
19 comment "Non-8250 serial port support"
23 depends on ARM_AMBA || COMPILE_TEST
33 bool "Support for console on AMBA serial port"
34 depends on SERIAL_AMBA_PL010=y
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
38 console (the system console is the device which receives all kernel
42 (/dev/tty0) will still be used as the system console by default, but
50 depends on ARM_AMBA
60 bool "Support for console on AMBA serial port"
61 depends on SERIAL_AMBA_PL011=y
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
66 console (the system console is the device which receives all kernel
70 (/dev/tty0) will still be used as the system console by default, but
78 depends on ARM64 || ARM || RISCV
85 This is enabled with "earlycon=smh" on the kernel command line.
89 bool "Early console using RISC-V SBI"
90 depends on RISCV_SBI_V01
95 Support for early debug console using RISC-V SBI. This enables
97 with "earlycon=sbi" on the kernel command line. The console is
101 tristate "BCM1xxx on-chip DUART serial support"
102 depends on SIBYTE_SB1xxx_SOC=y
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
109 is implemented. Depending on the SOC configuration there may be
113 the module will be called sb1250-duart.
116 bool "Support for console on a BCM1xxx DUART serial port"
117 depends on SERIAL_SB1250_DUART=y
122 system console (the system console is the device which receives all
129 bool "AT91 on-chip serial port support"
130 depends on COMMON_CLK
131 depends on ARCH_AT91 || COMPILE_TEST
136 This enables the driver for the on-chip UARTs of the Atmel
140 bool "Support for console on AT91 serial port"
141 depends on SERIAL_ATMEL=y
145 Say Y here if you wish to use an on-chip UART on a Atmel
146 AT91 processor as the system console (the system
151 bool "Support DMA transfers on AT91 serial port"
152 depends on SERIAL_ATMEL
167 depends on SERIAL_ATMEL=y
184 depends on KGDB_SERIAL_CONSOLE
203 depends on ARCH_MESON || COMPILE_TEST
206 This enables the driver for the on-chip UARTs of the Amlogic
210 bool "Support for console on meson"
211 depends on SERIAL_MESON
216 system console (the system console is the device which
222 depends on ARCH_CLPS711X || COMPILE_TEST
226 This enables the driver for the on-chip UARTs of the Cirrus
230 bool "Support for console on CLPS711X serial port"
231 depends on SERIAL_CLPS711X=y
235 (/dev/tty0) will still be used as the system console by default, but
241 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
244 Support for the on-chip UARTs on the Samsung
247 these ports, depending on how the serial port pins are configured.
253 depends on SERIAL_SAMSUNG
260 bool "Support for console on Samsung SoC serial port"
261 depends on SERIAL_SAMSUNG
265 Allow selection of the S3C24XX on-board serial ports for use as
269 (/dev/tty0) will still be used as the system console by default, but
277 depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
282 provide all of these ports, depending on how the serial port
288 depends on MAILBOX
289 depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
297 bool "Support for console on a Tegra TCU serial port"
298 depends on SERIAL_TEGRA_TCU=y
303 system console (the system console is the device which receives all
311 depends on SPI
314 MAX3100 chip support
318 depends on SPI_MASTER
326 that can be controlled through I2C or high-speed SPI.
332 depends on MACH_DECSTATION && 32BIT
336 DZ11-family serial controllers for DECstations and VAXstations,
340 bool "Support console on DECstation DZ serial driver"
341 depends on SERIAL_DZ=y
346 system console (the system console is the device which receives all
350 Note that the firmware uses ttyS3 as the serial console on
357 depends on MACH_DECSTATION
370 bool "Support for console on a DECstation Z85C30 serial port"
371 depends on SERIAL_ZS=y
376 system console (the system console is the device which receives all
380 Note that the firmware uses ttyS1 as the serial console on the
381 Maxine and ttyS3 on the others using this driver.
387 depends on FOOTBRIDGE
390 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
395 bool "Console on DC21285 serial port"
396 depends on SERIAL_21285=y
399 If you have enabled the serial port on the 21285 footbridge you can
403 (/dev/tty0) will still be used as the system console by default, but
411 depends on ARCH_PXA || ARCH_MMP
416 If you have a machine based on an Intel XScale PXA2xx CPU you
424 depends on !SERIAL_8250 || COMPILE_TEST
427 bool "Console on PXA serial port (DEPRECATED)"
428 depends on SERIAL_PXA
432 If you have enabled the serial port on the Intel XScale PXA
436 (/dev/tty0) will still be used as the system console by default, but
447 depends on ARCH_SA1100
451 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
457 bool "Console on SA1100 serial port"
458 depends on SERIAL_SA1100
461 If you have enabled the serial port on the SA1100/SA1110 StrongARM
465 (/dev/tty0) will still be used as the system console by default, but
473 depends on ARCH_MXC || COMPILE_TEST
478 If you have a machine based on a Motorola IMX CPU you
482 tristate "Console on IMX serial port"
483 depends on SERIAL_IMX
486 If you have enabled the serial port on the Freescale IMX
490 (/dev/tty0) will still be used as the system console by default, but
496 bool "Earlycon on IMX serial port"
497 depends on ARCH_MXC || COMPILE_TEST
498 depends on OF
504 If you have enabled the earlycon on the Freescale IMX
509 depends on HAS_IOMEM
518 bool "Support for console on Xilinx uartlite serial port"
519 depends on SERIAL_UARTLITE=y
523 Say Y here if you wish to use a Xilinx uartlite as the system
524 console (the system console is the device which receives all kernel
529 depends on SERIAL_UARTLITE
533 Set this to the number of uartlites in your system, or the number
538 depends on SPARC
545 depends on SPARC
547 This driver supports the Zilog8530 serial ports found on many Sparc
551 bool "Console on Sun Zilog8530 serial port"
552 depends on SERIAL_SUNZILOG=y
555 on your Sparc system as the console, you can do so by answering
560 depends on SPARC && PCI
563 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
567 bool "Console on Sun SU serial port"
568 depends on SERIAL_SUNSU=y
571 on your Sparc system as the console, you can do so by answering
576 depends on GSC
588 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
589 3. Add device ttyB0 to /etc/securetty (if you want to log on as
590 root on this console.)
594 bool "Support for console on serial MUX"
595 depends on SERIAL_MUX=y
601 depends on SPARC && PCI
603 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
608 bool "Console on Sun Siemens SAB82532 serial port"
609 depends on SERIAL_SUNSAB=y
612 on your Sparc system as the console, you can do so by answering
617 depends on SPARC64
619 This driver supports the console device found on SUN4V Sparc
624 depends on SGI_HAS_ZILOG
627 This driver supports the Zilog8530 serial ports found on SGI
631 bool "Console on SGI Zilog8530 serial port"
632 depends on SERIAL_IP22_ZILOG=y
637 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
645 depends on SERIAL_SH_SCI
651 bool "Support for console on SuperH SCI(F)" if EXPERT
652 depends on SERIAL_SH_SCI=y
657 bool "Support for early console on SuperH SCI(F)" if EXPERT
658 depends on SERIAL_SH_SCI=y
665 depends on SERIAL_SH_SCI && DMA_ENGINE
670 depends on ARCH_LPC32XX || COMPILE_TEST
671 depends on OF
675 Those are UARTs completely different from the Standard UARTs on the
681 depends on SERIAL_HS_LPC32XX=y
685 ports on the LPC32XX as the console, you can do so by answering
699 depends on COLDFIRE
706 depends on SERIAL_MCF
715 depends on SERIAL_MCF
718 Enable a ColdFire internal serial port to be the system console.
722 depends on (M68K && MAC) || PPC_PMAC
725 This driver supports the Zilog z85C30 serial ports found on
731 depends on SERIAL_PMACZILOG
733 The pmac_zilog driver for the z85C30 chip on many powermacs
741 the pmac_zilog and 8250 drivers to co-exist, but may cause
743 access the built-in serial ports on powermacs will need to
746 If you enable this option, any z85c30 ports in the system will
748 unable to use the 8250 module for PCMCIA or other 16C550-style
751 Say N unless you need the z85c30 ports on your (Power)Mac
755 bool "Console on Mac or PowerMac z85c30 serial port"
756 depends on SERIAL_PMACZILOG=y
760 on your (Power)Mac as the console, you can do so by answering
765 depends on CPM2 || CPM1
768 This driver supports the SCC and SMC serial ports on Motorola
772 bool "Support for console on CPM SCC/SMC serial port"
773 depends on SERIAL_CPM=y
776 Say Y here if you wish to use a SCC or SMC CPM UART as the system
777 console (the system console is the device which receives all kernel
781 (/dev/tty0) will still be used as the system console by default, but
789 depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
800 depends on SERIAL_PIC32=y
803 If you have a PIC32, this driver supports the putting a console on one
810 depends on PPC_MPC52xx || PPC_MPC512x
819 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
820 depends on SERIAL_MPC52xx=y
828 depends on SERIAL_MPC52xx_CONSOLE=y
837 depends on PCI
838 depends on PPC_PSERIES || COMPILE_TEST
851 depends on HAS_TXX9_SERIAL
860 depends on SERIAL_TXX9
865 depends on SERIAL_TXX9=y
870 depends on !SERIAL_8250 && SERIAL_TXX9
874 depends on PCI
880 box, for instance in order to become a dial-in server. This driver
889 tristate "MSM on-chip serial port support"
890 depends on ARCH_QCOM || COMPILE_TEST
895 depends on SERIAL_MSM=y
900 tristate "QCOM on-chip GENI based serial port support"
901 depends on ARCH_QCOM || COMPILE_TEST
902 depends on QCOM_GENI_SE
907 depends on SERIAL_QCOM_GENI
915 bool "VIA VT8500 on-chip serial port support"
916 depends on ARCH_VT8500 || COMPILE_TEST
921 depends on SERIAL_VT8500=y
926 depends on (ARCH_OMAP2PLUS && !SERIAL_8250_OMAP) || COMPILE_TEST
929 If you have a machine based on an Texas Instruments OMAP CPU you
933 with the omap-serial driver. DMA support can be enabled from platform
937 bool "Console on OMAP serial port"
938 depends on SERIAL_OMAP=y
945 (/dev/tty0) will still be used as the system console by default, but
953 depends on OF
958 contains a SiFive UART IP block. This type of UART is present on
962 bool "Console on SiFive UART"
963 depends on SERIAL_SIFIVE=y
969 system console.
972 (/dev/tty0) will still be used as the system console by default, but
980 depends on (LANTIQ || X86) || COMPILE_TEST
983 Support for UART on Lantiq and Intel SoCs.
988 bool "Console on Lantiq UART"
989 depends on SERIAL_LANTIQ=y
994 system console.
998 depends on QUICC_ENGINE
1002 This driver supports the QE serial ports on Freescale embedded
1014 bool "Console on SCCNXP serial port"
1015 depends on SERIAL_SCCNXP=y
1018 Support for console on SCCNXP serial ports.
1026 depends on (SPI_MASTER && !I2C) || I2C
1034 depends on SERIAL_SC16IS7XX
1035 depends on I2C
1040 Enable SC16IS7xx driver on I2C bus,
1047 depends on SERIAL_SC16IS7XX
1048 depends on SPI_MASTER
1052 Enable SC16IS7xx driver on SPI bus,
1060 depends on X86_32 || COMPILE_TEST
1062 Add support for UART controller on timberdale.
1067 depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
1070 This enables the driver for the onchip UART core found on
1076 BCM7xxx (STB) - DOCSIS console
1079 bool "Console on BCM63xx serial port"
1080 depends on SERIAL_BCM63XX=y
1084 If you have enabled the serial port on the BCM63xx CPU
1089 depends on OF && SPARC
1095 bool "Console on GRLIB APBUART serial port"
1096 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1099 Support for running a console on the GRLIB APBUART
1109 depends on SERIAL_ALTERA_JTAGUART=y
1113 Enable a Altera JTAG UART port to be the system console.
1117 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1131 depends on SERIAL_ALTERA_UART
1140 depends on SERIAL_ALTERA_UART
1149 depends on SERIAL_ALTERA_UART=y
1153 Enable a Altera UART port to be the system console.
1157 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
1166 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1168 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1172 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1173 depends on SERIAL_PCH_UART=y
1176 Say Y here if you wish to use the PCH UART as the system console
1177 (the system console is the device which receives all kernel messages and
1182 depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
1191 depends on SERIAL_MXS_AUART=y
1194 Enable a MXS AUART port to be the system console.
1198 depends on OF
1206 depends on SERIAL_XILINX_PS_UART=y
1210 Enable a Cadence UART port to be the system console.
1214 depends on (HAVE_CLK && ATH79) || (MIPS && COMPILE_TEST)
1219 built-in UART of the SoC, say Y to this option.
1225 bool "Console on AR933X serial port"
1226 depends on SERIAL_AR933X=y
1229 Enable a built-in UART port of the AR933X to be the system console.
1233 depends on SERIAL_AR933X
1241 depends on SERIAL_MPS2_UART
1247 depends on ARCH_MPS2 || COMPILE_TEST
1250 This driver support the UART ports on ARM MPS2.
1256 Driver for on-chip UART for ARC(Synopsys) for the legacy
1260 bool "Console on ARC UART"
1261 depends on SERIAL_ARC=y
1265 Enable system Console on ARC UART
1269 depends on SERIAL_ARC
1278 depends on PCI
1294 depends on SERIAL_RP2
1302 depends on HAS_DMA
1305 Support for the on-chip lpuart on some Freescale SOCs.
1308 bool "Console on Freescale lpuart serial port"
1309 depends on SERIAL_FSL_LPUART=y
1313 If you have enabled the lpuart serial port on the Freescale SoCs,
1318 depends on PRINTK
1321 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1324 bool "Console on Freescale LINFlexD UART serial port"
1325 depends on SERIAL_FSL_LINFLEXUART=y
1329 If you have enabled the LINFlexD UART serial port on the Freescale
1334 depends on OF
1337 Support for the on-chip USART on Conexant Digicolor SoCs.
1340 bool "Console on Conexant Digicolor serial port"
1341 depends on SERIAL_CONEXANT_DIGICOLOR=y
1344 If you have enabled the USART serial port on Conexant Digicolor
1350 depends on ARM || COMPILE_TEST
1352 This driver is for the on-chip Asynchronous Serial Controller on
1360 bool "Support for console on ST ASC"
1361 depends on SERIAL_ST_ASC=y
1367 depends on MCB
1369 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1370 on a MCB carrier.
1378 depends on COMMON_CLK
1384 depends on SERIAL_SPRD=y
1390 with "earlycon" on the kernel command line. The console is
1396 depends on ARCH_STM32 || COMPILE_TEST
1399 This driver is for the on-chip Serial Controller on
1407 bool "Support for console on STM32"
1408 depends on SERIAL_STM32=y
1414 depends on ARCH_MVEBU || COMPILE_TEST
1415 depends on COMMON_CLK
1419 based on the Armada-3700 SoC and wish to use the on-board serial
1425 bool "Console on Marvell EBU serial port"
1426 depends on SERIAL_MVEBU_UART
1431 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1432 (the system console is the device which receives all kernel messages
1438 depends on ARCH_ACTIONS || COMPILE_TEST
1442 Say 'Y' here if you wish to use the on-board serial port.
1446 bool "Console on Actions Semi Owl serial port"
1447 depends on SERIAL_OWL=y
1453 as the system console.
1457 depends on ARCH_RDA || COMPILE_TEST
1461 Say 'Y' here if you wish to use the on-board serial port.
1465 bool "Console on RDA Micro serial port"
1466 depends on SERIAL_RDA=y
1471 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1476 depends on ARCH_MILBEAUT || (COMPILE_TEST && OF)
1483 int "Maximum number of CSIO/UART ports (1-8)"
1485 depends on SERIAL_MILBEAUT_USIO
1489 bool "Support for console on MILBEAUT USIO/UART serial port"
1490 depends on SERIAL_MILBEAUT_USIO=y
1496 SoCs as the system console (the system console is the device which
1502 depends on HAS_IOMEM
1503 depends on OF
1504 depends on LITEX || COMPILE_TEST
1507 This driver is for the FPGA-based LiteUART serial controller from LiteX
1515 depends on SERIAL_LITEUART
1523 depends on SERIAL_LITEUART=y
1527 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1528 controller from LiteX SoC builder as the system console
1529 (the system console is the device which receives all kernel messages
1535 depends on ARCH_SUNPLUS || COMPILE_TEST
1538 Select this option if you would like to use Sunplus serial port on
1540 If you enable this option, Sunplus serial ports in the system will
1543 called sunplus-uart.
1546 bool "Console on Sunplus UART"
1547 depends on SERIAL_SUNPLUS
1552 system console.
1554 (/dev/tty0) will still be used as the system console by default, but
1560 depends on ARCH_MA35 || COMPILE_TEST
1566 module. If you enable this option, Ma35D1 serial ports in the system
1570 bool "Console on a Nuvotn MA35D1 family UART port"
1571 depends on SERIAL_NUVOTON_MA35D1=y
1577 (/dev/tty0) will still be used as the system console by default,