Lines Matching +full:uart +full:- +full:16550 +full:- +full:compatible
1 # SPDX-License-Identifier: GPL-2.0
3 # The 8250/16550 serial drivers. You shouldn't be in this list unless
8 tristate "8250/16550 and compatible serial support"
23 non-standard serial ports, since the configuration information will
51 If you did not notice yet and/or you have userspace from pre-3.7, it
55 bool "8250/16550 PNP device support" if EXPERT
63 bool "Support for variants of the 16550A serial port"
67 The 8250 driver can probe for many variants of the venerable 16550A
78 capabilities of the Fintek F81216A LPC to 4 UART as well similar
82 standard 16550A serial port, however the device may not function
88 bool "Console on 8250/16550 and compatible serial port"
127 bool "DMA support for 16550 compatible UART controllers" if EXPERT
132 compatible UART controllers that support DMA signaling.
138 tristate "8250/16550 PCI device support"
146 Note that serial ports on NetMos 9835 Multi-I/O cards are handled
150 tristate "8250/16550 Exar/Commtech PCI/PCIe device support"
164 tristate "8250/16550 PCMCIA device support"
167 Say Y here to enable support for 16-bit PCMCIA serial devices,
169 multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
170 credit-card size devices often used with laptops.)
178 tristate "MEN MCB UART device support"
190 int "Maximum number of 8250/16550 serial ports"
196 PCI enumeration and any ports that may be added at run-time
197 via hot-plug, or any ISA multi-port serial cards.
200 int "Number of 8250/16550 serial ports to register at runtime"
207 with the module parameter "nr_uarts", or boot-time parameter
211 bool "Extended 8250/16550 serial driver options"
214 If you wish to use any non-standard features of the standard "dumb"
229 FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
237 # Multi-port serial cards
259 tristate "Aspeed Virtual UART"
266 If you want to use the virtual UART (VUART) device on Aspeed
267 BMC platforms, enable this option. This enables the 16550A-
268 compatible device on the local LPC bus, giving a UART device
276 mini-HOWTO, available from <https://www.tldp.org/docs.html#howto>
282 tristate "Support Exar ST16C554/554D Quad UART"
285 The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
286 tinkering with your Envoy TU301, or have a machine with this UART,
339 Say Y here if you have a IODATA RSA-DV II/S ISA card and
341 You will need to provide module parameter "probe_rsa", or boot-time
358 tristate "BCM2835 auxiliar mini UART support"
362 Support for the BCM2835 auxiliar mini UART.
364 Features and limitations of the UART are
376 Missing receive time-out interrupt
382 tristate "Freescale 16550 UART support" if COMPILE_TEST && !(PPC || ARM || ARM64)
386 Selecting this option enables a workaround for a break-detection
387 erratum for Freescale 16550 UARTs in the 8250 driver. It also
391 tristate "DFL bus driver for Altera 16550 UART"
395 driver for the Altera 16550 UART. One or more Altera 16550 UARTs
408 present in the Synopsys DesignWare APB UART.
420 tristate "SGI IOC3 8250 UART support"
427 provides basic serial support by directly driving the UART chip
441 tristate "Support for OMAP internal UART (8250 based driver)"
486 tristate "Support for UniPhier on-chip UART"
490 If you have a UniPhier based board and want to use the on-chip
512 Selecting this option will enable handling of the UART found on
514 - Intel Baytrail SoC
515 - Intel Braswell SoC
516 - Intel Quark X1000 SoC
528 Selecting this option will enable handling of the UART found on
574 This option is used for all 8250 compatible serial ports that