Lines Matching refs:transmission
9 (www.pi433.de). It supports transmission and reception. It can be opened
10 by multiple applications for transmission and reception. While transmit
20 a) transmission
22 Each transmission can take place with a different configuration of the rf
24 takes care, that each transmission takes place with the parameterset of the
25 application, that requests the transmission. To allow the transmission to take
33 the air, the rf module is set to standby, the parameters for transmission gets
34 set, the hardware fifo of the rf chip gets preloaded and the transmission gets
38 transmission cycle ends.
48 interrupted by the transmission thread at any time to insert a transmission cycle.
50 as described for the transmission cycle the read out of the hardware fifo is done
67 PI433_IOC_RD_TX_CFG - get the transmission parameters from the driver
68 PI433_IOC_WR_TX_CFG - set the transmission parameters
72 The tx configuration is transferred via struct pi433_tx_cfg, the parameterset for transmission.
77 frequency used for transmission.
80 bit rate used for transmission.
113 fifo_level - transmission starts, if fifo is filled to
115 fifo_not_empty - transmission starts, as soon as there is one
168 frequency used for transmission.
171 bit rate used for transmission.