drivers/scsi/qla1280.h

114 struct device_reg {  struct
115 	uint16_t id_l;		/* ID low */
116 	uint16_t id_h;		/* ID high */
117 	uint16_t cfg_0;		/* Configuration 0 */
125 	uint16_t cfg_1;		/* Configuration 1 */
132 	uint16_t ictrl;		/* Interface control */
138 	uint16_t istatus;	/* Interface status */
142 	uint16_t semaphore;	/* Semaphore */
143 	uint16_t nvram;		/* NVRAM register. */
149 	uint16_t flash_data;	/* Flash BIOS data */
150 	uint16_t flash_address;	/* Flash BIOS address */
152 	uint16_t unused_1[0x06];
155 	uint16_t cdma_cfg;
160 	uint16_t cdma_ctrl;
161 	uint16_t cdma_status;
162 	uint16_t cdma_fifo_status;
163 	uint16_t cdma_count;
164 	uint16_t cdma_reserved;
165 	uint16_t cdma_address_count_0;
166 	uint16_t cdma_address_count_1;
167 	uint16_t cdma_address_count_2;
168 	uint16_t cdma_address_count_3;
170 	uint16_t unused_2[0x06];
172 	uint16_t ddma_cfg;
177 	uint16_t ddma_ctrl;
178 	uint16_t ddma_status;
179 	uint16_t ddma_fifo_status;
180 	uint16_t ddma_xfer_count_low;
181 	uint16_t ddma_xfer_count_high;
182 	uint16_t ddma_addr_count_0;
183 	uint16_t ddma_addr_count_1;
184 	uint16_t ddma_addr_count_2;
185 	uint16_t ddma_addr_count_3;
187 	uint16_t unused_3[0x0e];
189 	uint16_t mailbox0;	/* Mailbox 0 */
190 	uint16_t mailbox1;	/* Mailbox 1 */
191 	uint16_t mailbox2;	/* Mailbox 2 */
192 	uint16_t mailbox3;	/* Mailbox 3 */
193 	uint16_t mailbox4;	/* Mailbox 4 */
194 	uint16_t mailbox5;	/* Mailbox 5 */
195 	uint16_t mailbox6;	/* Mailbox 6 */
196 	uint16_t mailbox7;	/* Mailbox 7 */
198 	uint16_t unused_4[0x20];/* 0x80-0xbf Gap */
200 	uint16_t host_cmd;	/* Host command and control */
204 	uint16_t unused_5[0x5];	/* 0xc2-0xcb Gap */
206 	uint16_t gpio_data;
207 	uint16_t gpio_enable;
209 	uint16_t unused_6[0x11];	/* d0-f0 */
210 	uint16_t scsiControlPins;	/* f2 */