Lines Matching full:direct

31  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
50 * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
109 * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
130 ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as drives are exposed\n"); in mpt3sas_init_warpdrive_properties()
135 ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as number of drives > 1\n"); in mpt3sas_init_warpdrive_properties()
140 ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in computing number of drives\n"); in mpt3sas_init_warpdrive_properties()
148 ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n"); in mpt3sas_init_warpdrive_properties()
154 ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in retrieving RVPG0\n"); in mpt3sas_init_warpdrive_properties()
161 * assumed for WARPDRIVE, disable direct I/O in mpt3sas_init_warpdrive_properties()
164 …ioc_warn(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): num_mem=%d, ma… in mpt3sas_init_warpdrive_properties()
175 …ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle r… in mpt3sas_init_warpdrive_properties()
180 /* Disable direct I/O if member drive lba exceeds 4 bytes */ in mpt3sas_init_warpdrive_properties()
183 …ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle (… in mpt3sas_init_warpdrive_properties()
194 * Assumption for WD: Direct I/O is not supported if the volume is in mpt3sas_init_warpdrive_properties()
198 …ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): type=%d, s_sz=… in mpt3sas_init_warpdrive_properties()
209 …ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid stripe … in mpt3sas_init_warpdrive_properties()
219 …ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid block s… in mpt3sas_init_warpdrive_properties()
226 ioc_info(ioc, "WarpDrive : Direct IO is Enabled for the drive with handle(0x%04x)\n", in mpt3sas_init_warpdrive_properties()
229 * WARPDRIVE: Though the following fields are not used for direct IO, in mpt3sas_init_warpdrive_properties()
249 * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O