Lines Matching refs:a
14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * including a substantially similar Disclaimer requirement for further
47 * a C header file for use in the kernel portion of the Aic79xx driver.
137 SEND_REJECT, /* sending a message reject */
154 * that require a kernel based
166 * request to issue a message.
171 * either a command complete
187 * A command with a non-zero
191 * for commands with a zero
194 * to abort a command loses
1469 * The maximum number of commands to issue during a
1705 * as a constant outside of this register
1792 * Bitmask of ids to respond as a target.
1879 * coexistence of 8bit and 16bit devices on a wide bus.
1930 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT0.
1984 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT1.
2712 * Rev A has only a single bit (high bit of field) of slew adjustment.
2737 * The SCSI ID to use for Selection Out and seen during a reselection..
3456 * at the address specified by OVLYADDR. To write a full instruction word,
3508 * Incrementing index for writes to DINDIR. Can be used as a scratch register.
3810 * to send to a target.
3847 * target/channel/lun of a
3986 * is enabled, before issuing a CMDCMPLT interrupt for a completed
3995 * The maximum number of commands to coalesce into a single interrupt.
4106 * we are using a CDB pointer. Otherwise contains
4227 * Some 160 devices incorrectly accept 0xfe as a
4238 * The first is to allocate a dmamap for each transaction.
4256 /* PKT_OVERRUN_BUFSIZE must be a multiple of 256 less than 64K */