Lines Matching full:scsi
13 #define AHA152X_REVID "Adaptec 152x SCSI driver; $Revision: 2.7 $"
16 #define SCSISEQ (HOSTIOPORT0+0x00) /* SCSI sequence control */
17 #define SXFRCTL0 (HOSTIOPORT0+0x01) /* SCSI transfer control 0 */
18 #define SXFRCTL1 (HOSTIOPORT0+0x02) /* SCSI transfer control 1 */
19 #define SCSISIG (HOSTIOPORT0+0x03) /* SCSI signal in/out */
20 #define SCSIRATE (HOSTIOPORT0+0x04) /* SCSI rate control */
22 #define SCSIID SELID /* SCSI ID */
23 #define SCSIDAT (HOSTIOPORT0+0x06) /* SCSI latched data */
24 #define SCSIBUS (HOSTIOPORT0+0x07) /* SCSI data bus */
25 #define STCNT0 (HOSTIOPORT0+0x08) /* SCSI transfer count 0 */
26 #define STCNT1 (HOSTIOPORT0+0x09) /* SCSI transfer count 1 */
27 #define STCNT2 (HOSTIOPORT0+0x0a) /* SCSI transfer count 2 */
28 #define SSTAT0 (HOSTIOPORT0+0x0b) /* SCSI interrupt status 0 */
29 #define SSTAT1 (HOSTIOPORT0+0x0c) /* SCSI interrupt status 1 */
30 #define SSTAT2 (HOSTIOPORT0+0x0d) /* SCSI interrupt status 2 */
31 #define SCSITEST (HOSTIOPORT0+0x0e) /* SCSI test control */
32 #define SSTAT3 SCSITEST /* SCSI interrupt status 3 */
33 #define SSTAT4 (HOSTIOPORT0+0x0f) /* SCSI status 4 */
34 #define SIMODE0 (HOSTIOPORT1+0x10) /* SCSI interrupt mode 0 */
35 #define SIMODE1 (HOSTIOPORT1+0x11) /* SCSI interrupt mode 1 */
64 /* SCSI sequence control */
74 /* SCSI transfer control 0 */
82 /* SCSI transfer control 1 */
91 /* SCSI signal IN */
101 /* SCSI Phases */
110 /* SCSI signal OUT */
120 /* SCSI rate control */
125 /* SCSI ID */
130 /* SCSI transfer count */
139 /* SCSI interrupt status */
158 /* SCSI status 1 */
176 /* SCSI status 2 */
182 /* SCSI status 3 */
187 /* SCSI TEST control */
192 /* SCSI status 4 */
201 /* SCSI interrupt mode 0 */
210 /* SCSI interrupt mode 1 */
268 unsigned id:3; /* SCSI-id */
271 unsigned parity:1; /* SCSI-parity: 1=enabled 0=disabled */