33 	struct device *dev;  member
674 		dev_err(pca9450->dev,  in pca9450_irq_handler()
680 		dev_warn(pca9450->dev, "PWRON interrupt.\n");  in pca9450_irq_handler()
683 		dev_warn(pca9450->dev, "WDOGB interrupt.\n");  in pca9450_irq_handler()
686 		dev_warn(pca9450->dev, "VRFLT1 interrupt.\n");  in pca9450_irq_handler()
689 		dev_warn(pca9450->dev, "VRFLT2 interrupt.\n");  in pca9450_irq_handler()
692 		dev_warn(pca9450->dev, "LOWVSYS interrupt.\n");  in pca9450_irq_handler()
695 		dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n");  in pca9450_irq_handler()
698 		dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n");  in pca9450_irq_handler()
706 				      of_device_get_match_data(&i2c->dev);  in pca9450_i2c_probe()
715 		dev_err(&i2c->dev, "No IRQ configured?\n");  in pca9450_i2c_probe()
719 	pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL);  in pca9450_i2c_probe()
733 		dev_err(&i2c->dev, "Unknown device type");  in pca9450_i2c_probe()
739 	pca9450->dev = &i2c->dev;  in pca9450_i2c_probe()
741 	dev_set_drvdata(&i2c->dev, pca9450);  in pca9450_i2c_probe()
746 		dev_err(&i2c->dev, "regmap initialization failed\n");  in pca9450_i2c_probe()
752 		dev_err(&i2c->dev, "Read device id error\n");  in pca9450_i2c_probe()
759 		dev_err(&i2c->dev, "Device id(%x) mismatched\n",  in pca9450_i2c_probe()
773 		config.dev = pca9450->dev;  in pca9450_i2c_probe()
775 		rdev = devm_regulator_register(pca9450->dev, desc, &config);  in pca9450_i2c_probe()
778 			dev_err(pca9450->dev,  in pca9450_i2c_probe()
785 	ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,  in pca9450_i2c_probe()
790 		dev_err(pca9450->dev, "Failed to request IRQ: %d\n",  in pca9450_i2c_probe()
800 		dev_err(&i2c->dev, "Unmask irq error\n");  in pca9450_i2c_probe()
808 		dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);  in pca9450_i2c_probe()
812 	if (of_property_read_bool(i2c->dev.of_node, "nxp,wdog_b-warm-reset"))  in pca9450_i2c_probe()
821 		dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");  in pca9450_i2c_probe()
825 	if (of_property_read_bool(i2c->dev.of_node, "nxp,i2c-lt-enable")) {  in pca9450_i2c_probe()
830 			dev_err(&i2c->dev,  in pca9450_i2c_probe()
841 	pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);  in pca9450_i2c_probe()
844 		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");  in pca9450_i2c_probe()
848 	dev_info(&i2c->dev, "%s probed.\n",  in pca9450_i2c_probe()