Lines Matching +full:output +full:- +full:enable
1 # SPDX-License-Identifier: GPL-2.0-only
15 output in order to save power and prolong battery life. This applies
16 to both voltage regulators (where voltage output is controllable) and
17 current sinks (where current output is controllable).
31 Say yes here to enable debugging support.
38 managed regulators and simple non-configurable regulators.
65 They provide two I2C-controlled DC/DC step-down converters with
66 sleep mode and separate enable pins.
73 It delivers digitally programmable output,
85 tristate "Active-semi act8865 voltage regulator"
90 This driver controls a active-semi act8865 voltage output
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
110 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
114 Say y here to support Freescale i.MX on-chip ANATOP LDOs
122 If you have a AnalogicTech AAT2870 say Y to enable the
126 bool "ST-Ericsson AB8500 Power Regulators"
129 This driver supports the regulators found on the ST-Ericsson mixed
170 AS3722 PMIC. This will enable support for all the software
178 ATC260x PMICs. This will enable support for all the software
182 tristate "Awinic AW37503 Dual Output Power regulators"
186 This driver supports AW37503 single inductor - dual output
190 tristate "X-POWERS AXP20X PMIC Regulators"
201 BCM590xx PMUs. This will enable support for the software
210 This will enable support for the software controllable buck
214 will be called bd71815-regulator.
222 This will enable support for the software controllable buck
226 will be called bd71828-regulator.
234 This will enable support for the software controllable buck
238 will be called bd718x7-regulator.
245 ROHM BD9571MWV PMIC. This will enable support for the software
249 will be called bd9571mwv-regulator.
259 will be called bd9576-regulator.
276 will be called cros-ec-regulator.
290 This driver supports the voltage regulators of DA9052-BC and
291 DA9053-AA/Bx PMIC.
301 will be called da9055-regulator.
311 will be called da9062-regulator.
321 will be called da9063-regulator.
329 DA9121 is a single channel dual-phase buck converter controlled
332 DA9121 Single-channel dual-phase 10A buck converter
333 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
334 DA9217 Single-channel dual-phase 6A buck converter
335 DA9122 Dual-channel single-phase 5A buck converter
336 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
337 DA9220 Dual-channel single-phase 3A buck converter
338 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
341 will be called da9121-regulator.
349 The DA9210 is a multi-phase synchronous step down
350 converter 12A DC-DC Buck controlled through an I2C
360 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
361 step down converter 12A or 16A DC-DC Buck controlled through an I2C
368 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
381 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
382 regulator that delivers a digitally programmable output from an
383 input voltage supply of 2.5V to 5.5V. The output voltage is
403 and the platform has to provide a mapping of GPIO-states
412 Hi6421 is a multi-function device which, on regulator part, provides
422 Hi6421v530 is a multi-function device which, on regulator part,
462 One boost output voltage is configurable and always on.
498 provides two step-down converters and two general-purpose LDO
508 chip contains six step-down DC/DC converters which can support
516 provides four step-down converters. It supports software based
526 tristate "LTC3589 8-output voltage regulator"
530 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
531 8-output regulators controlled via I2C.
534 tristate "LTC3676 8-output voltage regulator"
539 8-output regulators controlled via I2C.
553 This driver controls a Maxim 1586 or 1587 voltage output
564 The MAX5970/5978 is a smart switch with no output regulation, but
572 via I2C bus. Both MAX77540 and MAX77541 are dual-phase
573 high-efficiency buck converter. Say Y here to
574 enable the regulator driver.
582 This driver controls Maxim MAX77620 voltage output regulator
584 chip to control Step-Down DC-DC and LDOs. Say Y here to
585 enable the regulator driver.
601 via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
603 enable the regulator driver
610 This driver controls a Maxim 8649 voltage output regulator via
617 This driver controls a Maxim 8660/8661 voltage output
625 This driver controls a Maxim 8893 voltage output
632 This driver controls a Maxim 8907 voltage output regulator
634 chip to control Step-Down DC-DC and LDOs.
646 This driver controls a Maxim 8952 voltage output regulator
647 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
656 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
657 switching regulator delivers up to 9A of output current. Each
667 S5PV210, and Exynos-4 chips to control VCC_CORE and
674 This driver controls a Maxim 8998 voltage output regulator
679 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
683 This driver controls a Maxim MAX20086-MAX20089 camera power
688 tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter"
692 This driver controls the Maxim MAX20411 family of high-efficiency,
693 syncrhonous step-down converters.
701 Exynos-4 chips to control VARM and VINT voltages.
710 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
728 It includes support for control of output voltage. This
758 suspend-to-ram/standby transition.
765 Say y here to support the MP5416 PMIC. This will enable supports
793 Say y here to support the MPQ7920 PMIC. This will enable supports
803 Say y here to select this option to enable the power regulator of
813 Say y here to select this option to enable the power regulator of
822 Say y here to select this option to enable the power regulator of
831 Say y here to select this option to enable the power regulator of
840 Say y here to select this option to enable the power regulator of
849 Say y here to select this option to enable the power regulator of
858 Say y here to select this option to enable the power regulator of
867 Say y here to select this option to enable the power regulator of
876 Say Y here to enable MT6360 regulator support.
878 2-channel buck with Thermal Shutdown and Overload Protection
879 6-channel High PSRR and Low Dropout LDO.
885 Say Y here to enable MT6370 regulator support.
893 Say y here to select this option to enable the power regulator of
902 Say y here to select this option to enable the power regulator of
922 chips say Y here. This will enable support for all the software
970 "pf8x00-regulator".
1016 This driver supports the MMIO-mapped reference voltage regulator,
1020 a module. The module will be named "qcom-refgen-regulator".
1032 "qcom_rpm-regulator".
1054 "qcom_smd-regulator".
1065 "qcom_spmi-regulator".
1072 regulator used to enable the VBUS output.
1074 Say M here if you want to include support for enabling the VBUS output
1090 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
1096 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
1097 touchscreen unit. The regulator is used to enable power to the
1104 Select this option to enable the power regulator of RICOH
1114 Select this option to enable the power regulator of ROCKCHIP
1145 RT4803 will enter boost mode. Otherwise, enable internal bypass
1192 It's a step-down switching voltage regulator. Using a proprietary
1205 The RT5759 is a high-performance, synchronous step-down DC-DC
1206 converter that can deliver up to 9A output current from 3V to 6.5V
1215 This device automatically change voltage output mode from
1217 The wide output range is from 2025mV to 5200mV and can be used on most
1221 tristate "Richtek RT6190 4-Switch BuckBoost controller"
1225 The RT6190 is a 4-Switch BuckBoost controller designed for converting
1226 input voltage to output voltage that can be equal to, higher or lower
1228 4.5V to 36V, and the output voltage can be set from 3V to 36V by
1237 It can support up to 14A output current and adjustable output voltage
1246 The RTQ2134 is a multi-phase, programmable power management IC that
1247 integrate with four high efficient, synchronous step-down converter
1248 cores. It features wide output voltage range and the capability to
1267 buck-boost. This device is suitable for automotive TFT-LCD panel.
1275 The RTQ2208 is a multi-phase, programmable power management IC that
1276 integrate with dual multi-configurable, synchronous buck converters
1277 and two ldos. It features wide output voltage range from 0.4V to 2.05V
1284 This driver controls Samsung S2MPA01 voltage output regulator
1292 output regulator via I2C bus. The chip is comprised of high efficient
1293 Buck converters including Dual-Phase Buck converter, Buck-Boost
1300 This driver supports a Samsung S5M8767A voltage output regulator
1301 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1302 supports DVS mode with 8bits of output voltage control.
1315 This driver supports Skyworks SKY81452 voltage output regulator
1320 will be called sky81452-regulator.
1336 multi-function device.
1347 will be called stm32-booster.
1359 will be called stm32-vrefbuf.
1381 tristate "TI Adaptive Body Bias on-chip LDO"
1384 Select this option to support Texas Instruments' on-chip Adaptive Body
1409 This driver supports SY8106A single output regulator.
1416 This driver supports SY8824C single output regulator.
1423 This driver supports SY8827N single output regulator.
1431 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1433 The voltage output can be configure through I2C interface or PWM
1452 high-frequency synchronous step down dc-dc converter optimized
1453 for battery-powered portable applications.
1461 high-frequency synchronous step-down converters with an I2C
1470 pin-to-pin high-frequency synchronous step-down dc-dc converters
1473 If built as a module it will be called tps6287x-regulator.
1481 three step-down converters and two general-purpose LDO voltage regulators.
1482 It supports TI's software based Class-2 SmartReflex implementation.
1489 three step-down converters and two general-purpose LDO voltage regulators.
1490 It supports TI's software based Class-2 SmartReflex implementation.
1507 tristate "TI TPS65132 Dual Output Power regulators"
1511 This driver supports TPS65132 single inductor - dual output
1519 provides three step-down converters and four general-purpose LDO
1528 provides six step-down converters and one general-purpose LDO
1559 provides three step-down converters and two general-purpose LDO
1589 The module will be called "tps68470-regulator".
1611 This driver provides support for voltage regulators whose output