Lines Matching +full:db8500 +full:- +full:i2c
1 # SPDX-License-Identifier: GPL-2.0-only
38 managed regulators and simple non-configurable regulators.
61 depends on I2C
65 They provide two I2C-controlled DC/DC step-down converters with
74 the voltage is programmed via I2C interface.
85 tristate "Active-semi act8865 voltage regulator"
86 depends on I2C
90 This driver controls a active-semi act8865 voltage output
91 regulator via I2C bus.
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
104 depends on I2C
110 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
114 Say y here to support Freescale i.MX on-chip ANATOP LDOs
126 bool "ST-Ericsson AB8500 Power Regulators"
129 This driver supports the regulators found on the ST-Ericsson mixed
183 depends on I2C && GPIOLIB
186 This driver supports AW37503 single inductor - dual output
190 tristate "X-POWERS AXP20X PMIC Regulators"
214 will be called bd71815-regulator.
226 will be called bd71828-regulator.
238 will be called bd718x7-regulator.
249 will be called bd9571mwv-regulator.
259 will be called bd9576-regulator.
276 will be called cros-ec-regulator.
290 This driver supports the voltage regulators of DA9052-BC and
291 DA9053-AA/Bx PMIC.
301 will be called da9055-regulator.
311 will be called da9062-regulator.
321 will be called da9063-regulator.
325 depends on I2C && OF
329 DA9121 is a single channel dual-phase buck converter controlled
330 through an I2C interface.
332 DA9121 Single-channel dual-phase 10A buck converter
333 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
334 DA9217 Single-channel dual-phase 6A buck converter
335 DA9122 Dual-channel single-phase 5A buck converter
336 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
337 DA9220 Dual-channel single-phase 3A buck converter
338 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
341 will be called da9121-regulator.
345 depends on I2C
349 The DA9210 is a multi-phase synchronous step down
350 converter 12A DC-DC Buck controlled through an I2C
355 depends on I2C
360 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
361 step down converter 12A or 16A DC-DC Buck controlled through an I2C
368 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
373 DB8500 PRCMU
377 depends on I2C
381 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
384 programmed through an I2C interface.
388 depends on I2C && OF
393 (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
403 and the platform has to provide a mapping of GPIO-states
412 Hi6421 is a multi-function device which, on regulator part, provides
422 Hi6421v530 is a multi-function device which, on regulator part,
445 depends on I2C
452 depends on I2C
474 depends on I2C
481 depends on I2C
488 depends on I2C
498 provides two step-down converters and two general-purpose LDO
504 depends on I2C
508 chip contains six step-down DC/DC converters which can support
516 provides four step-down converters. It supports software based
526 tristate "LTC3589 8-output voltage regulator"
527 depends on I2C
530 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
531 8-output regulators controlled via I2C.
534 tristate "LTC3676 8-output voltage regulator"
535 depends on I2C
539 8-output regulators controlled via I2C.
545 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
551 depends on I2C
554 regulator via I2C bus. The provided regulator is suitable
559 depends on I2C
563 This driver controls a Maxim 5970/5978 switch via I2C bus.
572 via I2C bus. Both MAX77540 and MAX77541 are dual-phase
573 high-efficiency buck converter. Say Y here to
583 via I2C bus. The provided regulator is suitable for Tegra
584 chip to control Step-Down DC-DC and LDOs. Say Y here to
597 depends on I2C
601 via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
607 depends on I2C
611 I2C bus.
615 depends on I2C
618 regulator via I2C bus.
622 depends on I2C
626 regulator via I2C bus.
633 via I2C bus. The provided regulator is suitable for Tegra
634 chip to control Step-Down DC-DC and LDOs.
644 depends on I2C
647 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
652 depends on I2C
656 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
666 via I2C bus. The provided regulator is suitable for S5PC110,
667 S5PV210, and Exynos-4 chips to control VCC_CORE and
675 via I2C bus. The provided regulator is suitable for S3C6410
679 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
680 depends on I2C
683 This driver controls a Maxim MAX20086-MAX20089 camera power
684 protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
688 tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter"
689 depends on I2C
692 This driver controls the Maxim MAX20411 family of high-efficiency,
693 syncrhonous step-down converters.
700 via I2C bus. The provided regulator is suitable for
701 Exynos-4 chips to control VARM and VINT voltages.
707 This driver controls a Maxim 77693/77843 regulators via I2C bus.
710 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
717 via I2C bus. The provided regulator is suitable for
723 depends on I2C
726 This driver controls a Maxim 77826 regulator via I2C bus.
752 depends on I2C && OF
758 suspend-to-ram/standby transition.
762 depends on I2C && OF
772 depends on I2C
783 depends on I2C && OF
790 depends on I2C && OF
800 depends on I2C
878 2-channel buck with Thermal Shutdown and Overload Protection
879 6-channel High PSRR and Low Dropout LDO.
940 depends on I2C
962 depends on I2C && OF
970 "pf8x00-regulator".
974 depends on I2C && OF
982 depends on I2C
990 depends on I2C
997 depends on I2C
1016 This driver supports the MMIO-mapped reference voltage regulator,
1020 a module. The module will be named "qcom-refgen-regulator".
1032 "qcom_rpm-regulator".
1054 "qcom_smd-regulator".
1065 "qcom_spmi-regulator".
1081 depends on I2C
1090 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
1092 depends on I2C
1096 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
1108 outputs which can be controlled by i2c communication.
1118 outputs which can be controlled by i2c communication.
1132 depends on I2C
1140 depends on I2C
1178 depends on I2C
1184 I2C control interface.
1188 depends on I2C
1192 It's a step-down switching voltage regulator. Using a proprietary
1201 depends on I2C
1205 The RT5759 is a high-performance, synchronous step-down DC-DC
1211 depends on I2C
1221 tristate "Richtek RT6190 4-Switch BuckBoost controller"
1222 depends on I2C
1225 The RT6190 is a 4-Switch BuckBoost controller designed for converting
1233 depends on I2C
1242 depends on I2C
1246 The RTQ2134 is a multi-phase, programmable power management IC that
1247 integrate with four high efficient, synchronous step-down converter
1253 depends on I2C
1262 depends on I2C
1267 buck-boost. This device is suitable for automotive TFT-LCD panel.
1271 depends on I2C
1275 The RTQ2208 is a multi-phase, programmable power management IC that
1276 integrate with dual multi-configurable, synchronous buck converters
1285 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1292 output regulator via I2C bus. The chip is comprised of high efficient
1293 Buck converters including Dual-Phase Buck converter, Buck-Boost
1301 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1316 via I2C bus. SKY81452 has one voltage linear regulator can be
1320 will be called sky81452-regulator.
1324 depends on I2C
1336 multi-function device.
1347 will be called stm32-booster.
1359 will be called stm32-vrefbuf.
1381 tristate "TI Adaptive Body Bias on-chip LDO"
1384 Select this option to support Texas Instruments' on-chip Adaptive Body
1406 depends on I2C && OF
1413 depends on I2C && OF
1420 depends on I2C && OF
1427 depends on I2C
1431 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1433 The voltage output can be configure through I2C interface or PWM
1447 depends on I2C
1452 high-frequency synchronous step down dc-dc converter optimized
1453 for battery-powered portable applications.
1457 depends on I2C && OF
1461 high-frequency synchronous step-down converters with an I2C
1466 depends on I2C && OF
1470 pin-to-pin high-frequency synchronous step-down dc-dc converters
1471 with an I2C interface.
1473 If built as a module it will be called tps6287x-regulator.
1477 depends on I2C
1481 three step-down converters and two general-purpose LDO voltage regulators.
1482 It supports TI's software based Class-2 SmartReflex implementation.
1486 depends on I2C
1489 three step-down converters and two general-purpose LDO voltage regulators.
1490 It supports TI's software based Class-2 SmartReflex implementation.
1508 depends on I2C && GPIOLIB
1511 This driver supports TPS65132 single inductor - dual output
1519 provides three step-down converters and four general-purpose LDO
1528 provides six step-down converters and one general-purpose LDO
1559 provides three step-down converters and two general-purpose LDO
1589 The module will be called "tps68470-regulator".