Lines Matching +full:6 +full:e +full:- +full:7
18 #include <linux/pinctrl/pinconf-generic.h>
24 #include "pinctrl-utils.h"
37 #define LPC18XX_SCU_PIN_EZI BIT(6)
38 #define LPC18XX_SCU_PIN_ZIF BIT(7)
48 #define LPC18XX_SCU_I2C0_ZIF BIT(7)
68 TYPE_ND, /* Normal-drive */
69 TYPE_HD, /* High-drive */
70 TYPE_HS, /* High-speed */
206 #define LPC18XX_ANALOG_PIN BIT(7)
248 LPC_P(1,6, GPIO, CTIN, R, EMC, R, R, SGPIO, SDMMC, 0, ND);
249 LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND);
269 LPC_P(2,6, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND);
270 LPC_P(2,7, GPIO, CTOUT, UART3, EMC, R, R, TIMER3, R, 0, ND);
283 LPC_P(3,6, GPIO, SPI, SSP0, SPIFI, R, SSP0_ALT, R, R, 0, ND);
284 LPC_P(3,7, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND);
292 LPC_P(4,6, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND);
293 LPC_P(4,7, LCD, CLKIN, R, R, R, R, I2S1,I2S0_TX_SCK, 0, ND);
303 LPC_P(5,6, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
304 LPC_P(5,7, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND);
305 LPC_P(6,0, R, I2S0_RX_MCLK,R, R, I2S0_RX_SCK, R, R, R, 0, ND);
306 LPC_P(6,1, GPIO, EMC, UART0, I2S0_RX_WS, R, TIMER2, R, R, 0, ND);
307 LPC_P(6,2, GPIO, EMC, UART0, I2S0_RX_SDA, R, TIMER2, R, R, 0, ND);
308 LPC_P(6,3, GPIO, USB0, SGPIO, EMC, R, TIMER2, R, R, 0, ND);
309 LPC_P(6,4, GPIO, CTIN, UART0, EMC, R, R, R, R, 0, ND);
310 LPC_P(6,5, GPIO, CTOUT, UART0, EMC, R, R, R, R, 0, ND);
311 LPC_P(6,6, GPIO, EMC, SGPIO, USB0, R, TIMER2, R, R, 0, ND);
312 LPC_P(6,7, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
313 LPC_P(6,8, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND);
314 LPC_P(6,9, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
315 LPC_P(6,10, GPIO, MCTRL, R, EMC, R, R, R, R, 0, ND);
316 LPC_P(6,11, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND);
317 LPC_P(6,12, GPIO, CTOUT, R, EMC, R, R, R, R, 0, ND);
318 LPC_P(7,0, GPIO, CTOUT, R, LCD, R, R, R, SGPIO, 0, ND);
319 LPC_P(7,1, GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
320 LPC_P(7,2, GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND);
321 LPC_P(7,3, GPIO, CTIN, R, LCD,LCD_ALT, R, R, R, 0, ND);
322 LPC_P(7,4, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|4, ND);
323 LPC_P(7,5, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|3, ND);
324 LPC_P(7,6, GPIO, CTOUT, R, LCD, R, TRACE, R, R, 0, ND);
325 LPC_P(7,7, GPIO, CTOUT, R, LCD, R, TRACE, ENET, SGPIO, ADC1|6, ND);
332 LPC_P(8,6, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
333 LPC_P(8,7, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND);
341 LPC_P(9,6, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART0, 0, ND);
353 LPC_P(b,6, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, ADC0|6, ND);
360 LPC_P(c,6, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
361 LPC_P(c,7, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND);
375 LPC_P(d,6, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND);
376 LPC_P(d,7, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND);
386 LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
387 LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND);
388 LPC_P(e,2,ADCTRIG, CAN0, R, EMC, GPIO, R, R, R, 0, ND);
389 LPC_P(e,3, R, CAN0,ADCTRIG, EMC, GPIO, R, R, R, 0, ND);
390 LPC_P(e,4, R, NMI, R, EMC, GPIO, R, R, R, 0, ND);
391 LPC_P(e,5, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
392 LPC_P(e,6, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
393 LPC_P(e,7, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
394 LPC_P(e,8, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
395 LPC_P(e,9, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
396 LPC_P(e,10, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND);
397 LPC_P(e,11, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
398 LPC_P(e,12, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND);
399 LPC_P(e,13, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
400 LPC_P(e,14, R, R, R, EMC, GPIO, R, R, R, 0, ND);
401 LPC_P(e,15, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND);
408 LPC_P(f,6, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|3, ND);
409 LPC_P(f,7, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|7, ND);
458 LPC18XX_PIN_P(1,6),
459 LPC18XX_PIN_P(1,7),
479 LPC18XX_PIN_P(2,6),
480 LPC18XX_PIN_P(2,7),
493 LPC18XX_PIN_P(3,6),
494 LPC18XX_PIN_P(3,7),
502 LPC18XX_PIN_P(4,6),
503 LPC18XX_PIN_P(4,7),
513 LPC18XX_PIN_P(5,6),
514 LPC18XX_PIN_P(5,7),
515 LPC18XX_PIN_P(6,0),
516 LPC18XX_PIN_P(6,1),
517 LPC18XX_PIN_P(6,2),
518 LPC18XX_PIN_P(6,3),
519 LPC18XX_PIN_P(6,4),
520 LPC18XX_PIN_P(6,5),
521 LPC18XX_PIN_P(6,6),
522 LPC18XX_PIN_P(6,7),
523 LPC18XX_PIN_P(6,8),
524 LPC18XX_PIN_P(6,9),
525 LPC18XX_PIN_P(6,10),
526 LPC18XX_PIN_P(6,11),
527 LPC18XX_PIN_P(6,12),
528 LPC18XX_PIN_P(7,0),
529 LPC18XX_PIN_P(7,1),
530 LPC18XX_PIN_P(7,2),
531 LPC18XX_PIN_P(7,3),
532 LPC18XX_PIN_P(7,4),
533 LPC18XX_PIN_P(7,5),
534 LPC18XX_PIN_P(7,6),
535 LPC18XX_PIN_P(7,7),
542 LPC18XX_PIN_P(8,6),
543 LPC18XX_PIN_P(8,7),
551 LPC18XX_PIN_P(9,6),
563 LPC18XX_PIN_P(b,6),
570 LPC18XX_PIN_P(c,6),
571 LPC18XX_PIN_P(c,7),
585 LPC18XX_PIN_P(d,6),
586 LPC18XX_PIN_P(d,7),
596 LPC18XX_PIN_P(e,0),
597 LPC18XX_PIN_P(e,1),
598 LPC18XX_PIN_P(e,2),
599 LPC18XX_PIN_P(e,3),
600 LPC18XX_PIN_P(e,4),
601 LPC18XX_PIN_P(e,5),
602 LPC18XX_PIN_P(e,6),
603 LPC18XX_PIN_P(e,7),
604 LPC18XX_PIN_P(e,8),
605 LPC18XX_PIN_P(e,9),
606 LPC18XX_PIN_P(e,10),
607 LPC18XX_PIN_P(e,11),
608 LPC18XX_PIN_P(e,12),
609 LPC18XX_PIN_P(e,13),
610 LPC18XX_PIN_P(e,14),
611 LPC18XX_PIN_P(e,15),
618 LPC18XX_PIN_P(f,6),
619 LPC18XX_PIN_P(f,7),
639 {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
660 return -EINVAL; in lpc18xx_pconf_get_usb1()
667 return -EINVAL; in lpc18xx_pconf_get_usb1()
671 return -ENOTSUPP; in lpc18xx_pconf_get_usb1()
692 return -EINVAL; in lpc18xx_pconf_get_i2c0()
711 return -EINVAL; in lpc18xx_pconf_get_i2c0()
717 return -ENOTSUPP; in lpc18xx_pconf_get_i2c0()
729 return -EINVAL; in lpc18xx_pin_to_gpio()
731 return pin - range->pin_base + range->base; in lpc18xx_pin_to_gpio()
748 return -EINVAL; in lpc18xx_get_pintsel()
770 return -ENOTSUPP; in lpc18xx_pconf_get_gpio_pin_int()
776 * PINTSEL registers. *arg indicates which interrupt number (0-7). in lpc18xx_pconf_get_gpio_pin_int()
779 ret = lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL0, val, arg); in lpc18xx_pconf_get_gpio_pin_int()
783 return lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL1, val, arg); in lpc18xx_pconf_get_gpio_pin_int()
795 return -EINVAL; in lpc18xx_pconf_get_pin()
800 return -EINVAL; in lpc18xx_pconf_get_pin()
809 return -EINVAL; in lpc18xx_pconf_get_pin()
816 return -EINVAL; in lpc18xx_pconf_get_pin()
820 if (pin_cap->type == TYPE_HD) in lpc18xx_pconf_get_pin()
821 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
831 return -EINVAL; in lpc18xx_pconf_get_pin()
837 if (pin_cap->type != TYPE_HD) in lpc18xx_pconf_get_pin()
838 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
856 return -ENOTSUPP; in lpc18xx_pconf_get_pin()
885 return -EINVAL; in lpc18xx_pconf_get()
887 reg = readl(scu->base + pin_cap->offset); in lpc18xx_pconf_get()
889 if (pin_cap->type == TYPE_I2C0) in lpc18xx_pconf_get()
891 else if (pin_cap->type == TYPE_USB1) in lpc18xx_pconf_get()
925 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_usb1()
926 return -ENOTSUPP; in lpc18xx_pconf_set_usb1()
965 return -ENOTSUPP; in lpc18xx_pconf_set_i2c0()
976 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_i2c0()
977 return -ENOTSUPP; in lpc18xx_pconf_set_i2c0()
991 return -EINVAL; in lpc18xx_pconf_set_gpio_pin_int()
995 return -ENOTSUPP; in lpc18xx_pconf_set_gpio_pin_int()
1001 reg_val = readl(scu->base + reg_offset); in lpc18xx_pconf_set_gpio_pin_int()
1004 writel(reg_val, scu->base + reg_offset); in lpc18xx_pconf_set_gpio_pin_int()
1035 if (pin_cap->type == TYPE_HD) { in lpc18xx_pconf_set_pin()
1036 dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n"); in lpc18xx_pconf_set_pin()
1037 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1054 if (pin_cap->type != TYPE_HD) { in lpc18xx_pconf_set_pin()
1055 dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n"); in lpc18xx_pconf_set_pin()
1056 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1061 case 20: param_val -= 5; in lpc18xx_pconf_set_pin()
1063 case 14: param_val -= 5; in lpc18xx_pconf_set_pin()
1065 case 8: param_val -= 3; in lpc18xx_pconf_set_pin()
1067 case 4: param_val -= 4; in lpc18xx_pconf_set_pin()
1070 dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val); in lpc18xx_pconf_set_pin()
1071 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1080 dev_err(pctldev->dev, "Property not supported\n"); in lpc18xx_pconf_set_pin()
1081 return -ENOTSUPP; in lpc18xx_pconf_set_pin()
1100 return -EINVAL; in lpc18xx_pconf_set()
1102 reg = readl(scu->base + pin_cap->offset); in lpc18xx_pconf_set()
1108 if (pin_cap->type == TYPE_I2C0) in lpc18xx_pconf_set()
1110 else if (pin_cap->type == TYPE_USB1) in lpc18xx_pconf_set()
1119 writel(reg, scu->base + pin_cap->offset); in lpc18xx_pconf_set()
1148 *groups = scu->func[function].groups; in lpc18xx_pmx_get_func_groups()
1149 *num_groups = scu->func[function].ngroups; in lpc18xx_pmx_get_func_groups()
1163 if (pin->type == TYPE_USB1) { in lpc18xx_pmx_set()
1170 if (pin->type == TYPE_I2C0) { in lpc18xx_pmx_set()
1177 if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) { in lpc18xx_pmx_set()
1180 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); in lpc18xx_pmx_set()
1182 if (LPC18XX_ANALOG_ADC(pin->analog) == 0) in lpc18xx_pmx_set()
1187 reg = readl(scu->base + offset); in lpc18xx_pmx_set()
1188 reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK; in lpc18xx_pmx_set()
1189 writel(reg, scu->base + offset); in lpc18xx_pmx_set()
1194 if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) { in lpc18xx_pmx_set()
1195 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); in lpc18xx_pmx_set()
1197 reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2); in lpc18xx_pmx_set()
1199 writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2); in lpc18xx_pmx_set()
1205 if (function == pin->functions[func]) in lpc18xx_pmx_set()
1212 reg = readl(scu->base + pin->offset); in lpc18xx_pmx_set()
1214 writel(reg | func, scu->base + pin->offset); in lpc18xx_pmx_set()
1218 dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name, in lpc18xx_pmx_set()
1220 return -EINVAL; in lpc18xx_pmx_set()
1261 .name = "lpc18xx/43xx-scu",
1280 if (function == FUNC_DAC && p->analog == DAC) in lpc18xx_valid_pin_function()
1283 if (function == FUNC_ADC && p->analog) in lpc18xx_valid_pin_function()
1286 if (function == FUNC_I2C0 && p->type == TYPE_I2C0) in lpc18xx_valid_pin_function()
1289 if (function == FUNC_USB1 && p->type == TYPE_USB1) in lpc18xx_valid_pin_function()
1293 if (function == p->functions[i]) in lpc18xx_valid_pin_function()
1312 scu->func[func].ngroups = ngroups; in lpc18xx_create_group_func_map()
1313 scu->func[func].groups = devm_kcalloc(dev, in lpc18xx_create_group_func_map()
1316 if (!scu->func[func].groups) in lpc18xx_create_group_func_map()
1317 return -ENOMEM; in lpc18xx_create_group_func_map()
1320 scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name; in lpc18xx_create_group_func_map()
1331 scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL); in lpc18xx_scu_probe()
1333 return -ENOMEM; in lpc18xx_scu_probe()
1335 scu->base = devm_platform_ioremap_resource(pdev, 0); in lpc18xx_scu_probe()
1336 if (IS_ERR(scu->base)) in lpc18xx_scu_probe()
1337 return PTR_ERR(scu->base); in lpc18xx_scu_probe()
1339 scu->clk = devm_clk_get(&pdev->dev, NULL); in lpc18xx_scu_probe()
1340 if (IS_ERR(scu->clk)) { in lpc18xx_scu_probe()
1341 dev_err(&pdev->dev, "Input clock not found.\n"); in lpc18xx_scu_probe()
1342 return PTR_ERR(scu->clk); in lpc18xx_scu_probe()
1345 ret = lpc18xx_create_group_func_map(&pdev->dev, scu); in lpc18xx_scu_probe()
1347 dev_err(&pdev->dev, "Unable to create group func map.\n"); in lpc18xx_scu_probe()
1351 ret = clk_prepare_enable(scu->clk); in lpc18xx_scu_probe()
1353 dev_err(&pdev->dev, "Unable to enable clock.\n"); in lpc18xx_scu_probe()
1359 scu->pctl = devm_pinctrl_register(&pdev->dev, &lpc18xx_scu_desc, scu); in lpc18xx_scu_probe()
1360 if (IS_ERR(scu->pctl)) { in lpc18xx_scu_probe()
1361 dev_err(&pdev->dev, "Could not register pinctrl driver\n"); in lpc18xx_scu_probe()
1362 clk_disable_unprepare(scu->clk); in lpc18xx_scu_probe()
1363 return PTR_ERR(scu->pctl); in lpc18xx_scu_probe()
1370 { .compatible = "nxp,lpc1850-scu" },
1377 .name = "lpc18xx-scu",