Lines Matching refs:rsi_dbg
241 rsi_dbg(INFO_ZONE, "***** Hardware scan start *****\n"); in rsi_mac80211_hw_scan_start()
265 rsi_dbg(INFO_ZONE, "Background scan started...\n"); in rsi_mac80211_hw_scan_start()
281 rsi_dbg(INFO_ZONE, "***** Hardware scan stop *****\n"); in rsi_mac80211_cancel_hw_scan()
289 rsi_dbg(INFO_ZONE, "Back ground scan cancelled\n"); in rsi_mac80211_cancel_hw_scan()
344 rsi_dbg(ERR_ZONE, "##### No MAC #####\n"); in rsi_indicate_tx_status()
395 rsi_dbg(ERR_ZONE, "===> Interface UP <===\n"); in rsi_mac80211_start()
421 rsi_dbg(ERR_ZONE, "===> Interface DOWN <===\n"); in rsi_mac80211_stop()
473 rsi_dbg(ERR_ZONE, in rsi_mac80211_add_interface()
493 rsi_dbg(ERR_ZONE, "Reject: Max VAPs reached\n"); in rsi_mac80211_add_interface()
504 rsi_dbg(ERR_ZONE, "Failed to set VAP capabilities\n"); in rsi_mac80211_add_interface()
537 rsi_dbg(INFO_ZONE, "Remove Interface Called\n"); in rsi_mac80211_remove_interface()
548 rsi_dbg(ERR_ZONE, "Opmode error : %d\n", opmode); in rsi_mac80211_remove_interface()
584 rsi_dbg(INFO_ZONE, in rsi_channel_change()
603 rsi_dbg(INFO_ZONE, "blk data q %d\n", channel); in rsi_channel_change()
616 rsi_dbg(INFO_ZONE, "unblk data q %d\n", channel); in rsi_channel_change()
638 rsi_dbg(ERR_ZONE, "%s: No virtual interface found\n", __func__); in rsi_config_power()
642 rsi_dbg(INFO_ZONE, in rsi_config_power()
677 rsi_dbg(INFO_ZONE, "%s: Configuring Power\n", __func__); in rsi_mac80211_config()
715 rsi_dbg(INFO_ZONE, "RTS threshold\n"); in rsi_mac80211_config()
717 rsi_dbg(INFO_ZONE, in rsi_mac80211_config()
769 rsi_dbg(INFO_ZONE, "Switched to channel - %d\n", channel->hw_value); in rsi_switch_channel()
796 rsi_dbg(INFO_ZONE, "%s: Changed Association status: %d\n", in rsi_mac80211_bss_info_changed()
819 rsi_dbg(INFO_ZONE, "Configuring UAPSD\n"); in rsi_mac80211_bss_info_changed()
831 rsi_dbg(INFO_ZONE, "RSSI threshold & hysteresis are: %d %d\n", in rsi_mac80211_bss_info_changed()
837 rsi_dbg(INFO_ZONE, "%s: Changed Beacon interval: %d\n", in rsi_mac80211_bss_info_changed()
857 rsi_dbg(INFO_ZONE, "===> BEACON ENABLED <===\n"); in rsi_mac80211_bss_info_changed()
860 rsi_dbg(INFO_ZONE, "===> BEACON DISABLED <===\n"); in rsi_mac80211_bss_info_changed()
910 rsi_dbg(INFO_ZONE, in rsi_mac80211_conf_tx()
974 rsi_dbg(ERR_ZONE, "%s: Cipher 0x%x key_type: %d key_len: %d\n", in rsi_hal_key_config()
1060 rsi_dbg(ERR_ZONE, "%s: RSI set_key\n", __func__); in rsi_mac80211_set_key()
1064 rsi_dbg(ERR_ZONE, "%s: RSI del key\n", __func__); in rsi_mac80211_set_key()
1122 rsi_dbg(ERR_ZONE, "No station mapped\n"); in rsi_mac80211_ampdu_action()
1129 rsi_dbg(INFO_ZONE, in rsi_mac80211_ampdu_action()
1191 rsi_dbg(ERR_ZONE, "%s: Unknown AMPDU action\n", __func__); in rsi_mac80211_ampdu_action()
1289 rsi_dbg(INFO_ZONE, "CQM: Notifying event: %d\n", event); in rsi_perform_cqm()
1413 rsi_dbg(INFO_ZONE, "Station Add: %pM\n", sta->addr); in rsi_mac80211_sta_add()
1425 rsi_dbg(ERR_ZONE, "Reject: Max Stations exists\n"); in rsi_mac80211_sta_add()
1438 rsi_dbg(INFO_ZONE, "Station exists\n"); in rsi_mac80211_sta_add()
1449 rsi_dbg(ERR_ZONE, in rsi_mac80211_sta_add()
1463 rsi_dbg(INFO_ZONE, "New Station\n"); in rsi_mac80211_sta_add()
1466 rsi_dbg(INFO_ZONE, "Indicate bss status to device\n"); in rsi_mac80211_sta_add()
1528 rsi_dbg(INFO_ZONE, "Station Remove: %pM\n", sta->addr); in rsi_mac80211_sta_remove()
1537 rsi_dbg(INFO_ZONE, "Indicate bss status to device\n"); in rsi_mac80211_sta_remove()
1558 rsi_dbg(ERR_ZONE, "%s: No station found\n", __func__); in rsi_mac80211_sta_remove()
1598 rsi_dbg(ERR_ZONE, in rsi_mac80211_set_antenna()
1601 rsi_dbg(ERR_ZONE, in rsi_mac80211_set_antenna()
1606 rsi_dbg(INFO_ZONE, "%s: Antenna map Tx %x Rx %d\n", in rsi_mac80211_set_antenna()
1616 rsi_dbg(INFO_ZONE, "(%s) Antenna path configured successfully\n", in rsi_mac80211_set_antenna()
1626 rsi_dbg(ERR_ZONE, "%s: Failed.\n", __func__); in rsi_mac80211_set_antenna()
1684 rsi_dbg(INFO_ZONE, "country = %s dfs_region = %d\n", in rsi_reg_notify()
1700 rsi_dbg(INFO_ZONE, "RSI region code = %d\n", adapter->dfs_region); in rsi_reg_notify()
1750 rsi_dbg(INFO_ZONE, "Remain on channel expired\n"); in rsi_roc_timeout()
1770 rsi_dbg(INFO_ZONE, "***** Remain on channel *****\n"); in rsi_mac80211_roc()
1773 rsi_dbg(INFO_ZONE, "%s: channel: %d duration: %dms\n", in rsi_mac80211_roc()
1777 rsi_dbg(INFO_ZONE, "Stop on-going ROC\n"); in rsi_mac80211_roc()
1785 rsi_dbg(ERR_ZONE, "Failed to set band\n"); in rsi_mac80211_roc()
1792 rsi_dbg(ERR_ZONE, "Failed to set the channel\n"); in rsi_mac80211_roc()
1799 rsi_dbg(INFO_ZONE, "%s: Ready on channel :%d\n", in rsi_mac80211_roc()
1814 rsi_dbg(INFO_ZONE, "Cancel remain on channel\n"); in rsi_mac80211_cancel_roc()
1846 rsi_dbg(INFO_ZONE, "Mapping wowlan triggers\n"); in rsi_wow_map_triggers()
1868 rsi_dbg(INFO_ZONE, "Config WoWLAN to device\n"); in rsi_config_wowlan()
1874 rsi_dbg(ERR_ZONE, "WoW triggers not enabled\n"); in rsi_config_wowlan()
1881 rsi_dbg(ERR_ZONE, "%s:No valid WoW triggers\n", __func__); in rsi_config_wowlan()
1885 rsi_dbg(ERR_ZONE, in rsi_config_wowlan()
1890 rsi_dbg(INFO_ZONE, "TRIGGERS %x\n", triggers); in rsi_config_wowlan()
1916 rsi_dbg(INFO_ZONE, "%s: mac80211 suspend\n", __func__); in rsi_mac80211_suspend()
1919 rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n"); in rsi_mac80211_suspend()
1936 rsi_dbg(INFO_ZONE, "%s: mac80211 resume\n", __func__); in rsi_mac80211_resume()
2003 rsi_dbg(INIT_ZONE, "%s: Performing mac80211 attach\n", __func__); in rsi_mac80211_attach()
2007 rsi_dbg(ERR_ZONE, "%s: ieee80211 hw alloc failed\n", __func__); in rsi_mac80211_attach()
2072 rsi_dbg(ERR_ZONE, "Max Stations Allowed = %d\n", common->max_stations); in rsi_mac80211_attach()