Lines Matching full:scan
10 /* Scan Commands, Responses, Notifications */
13 * enum iwl_scan_subcmd_ids - scan commands
29 * struct iwl_ssid_ie - directed scan network information element
46 /* scan offload */
55 /* Default watchdog (in MS) for scheduled scan iteration */
166 * struct iwl_scan_schedule_lmac - schedule of scan offload
168 * @iterations: num of scan iterations
169 * @full_scan_mul: number of partial scans before each full scan
211 * @flags: bits 1-20: directed scan to i'th ssid
214 * @iter_count: scan iteration on this channel
275 * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
278 * 2 - every second scan will be full scan(and so on).
286 * enum iwl_mvm_lmac_scan_flags - LMAC scan flags
289 * @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
290 * @IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan
332 * @n_channels: num of channels to scan
335 * @fragmented_dwell: dwell time for fragmented passive scan
341 * @suspend_time: pause scan this long (TUs) when returning to service channel
344 * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz
345 * @direct_scan: list of SSIDs for directed active scan
347 * @iter_num: number of scan iterations
351 * @channel_opt: channel optimization options, for full and partial scan
382 * struct iwl_scan_results_notif - scan results for one channel -
407 * @results: an array of scan results, only "scanned_channels" of them are valid
422 * @last_schedule_iteration: last scan iteration executed before scan abort
437 /* UMAC Scan API */
505 * @active: default dwell time for active scan
506 * @passive: default dwell time for passive scan
507 * @fragmented: default dwell time for fragmented scan
518 * struct iwl_scan_config_v1 - scan configuration command
525 * @dwell: dwells for the scan
551 * struct iwl_scan_config_v2 - scan configuration command
558 * @dwell: dwells for the scan
580 * struct iwl_scan_config - scan configuration command
599 * enum iwl_umac_scan_flags - UMAC scan flags
600 * @IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
601 * can be preempted by other scan requests with higher priority.
602 * The low priority scan will be resumed when the higher proirity scan is
605 * when scan starts.
640 * enum iwl_umac_scan_general_flags2 - UMAC scan general flags #2
652 * enum iwl_umac_scan_general_flags_v2 - UMAC scan general flags version 2
658 * during scan iterations
661 * @IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1: fragmented scan LMAC1
662 * @IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC2: fragmented scan LMAC2
663 * @IWL_UMAC_SCAN_GEN_FLAGS_V2_MATCH: does this scan check for profile matching
668 * @IWL_UMAC_SCAN_GEN_FLAGS_V2_NTF_START: send notification of scan start
673 * 5.2Ghz bands scan, trigger scan on 6GHz band to discover
676 * bands scan, if not APs were discovered, allow scan to conitnue and scan
679 * &IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN is enabled and scan is
706 * enum iwl_umac_scan_general_params_flags2 - UMAC scan general flags2
708 * @IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_LB: scan event scheduling
710 * @IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_HB: scan event scheduling
713 * valid antennas, and use the same antenna as in previous scan
723 * @flags: bitmap - 0-19: directed scan to i'th ssid.
727 * @iter_interval: interval between two scan iterations on one channel.
762 * @interval: interval in seconds between scan iterations
763 * @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop
783 * struct iwl_scan_req_umac_tail - the rest of the UMAC scan request command
786 * @delay: delay in TUs before starting the first scan iteration
789 * @direct_scan: list of SSIDs for directed active scan
804 * @count: num of channels in scan request
816 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
819 * @scan_start_mac_id: report the scan start TSF time according to this mac TSF
821 * @active_dwell: dwell time for active scan per LMAC
822 * @passive_dwell: dwell time for passive scan per LMAC
823 * @fragmented_dwell: dwell time for fragmented passive scan
830 * to total scan time
834 * @scan_priority: scan internal prioritization &enum iwl_scan_priority
836 * Relevant only for fragmented scan.
927 * @preq: scan probe request params
928 * @ssid_num: number of valid SSIDs in direct scan array
949 * @preq: scan probe request params
972 * @count: num of channels in scan request
995 * @count: num of channels in scan request
1014 * @scan_start_mac_or_link_id: report the scan start TSF time according to this
1016 * @active_dwell: dwell time for active scan per LMAC
1026 * can add to the total scan time
1033 * scan coverage.
1055 * @delay: initial delay of the periodic scan in seconds
1094 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
1096 * @scan_params: scan parameters
1106 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
1108 * @scan_params: scan parameters
1118 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
1129 * @IWL_UMAC_SCAN_ABORT_STATUS_SUCCESS: scan was successfully aborted
1130 * @IWL_UMAC_SCAN_ABORT_STATUS_IN_PROGRESS: scan abort is in progress
1141 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
1143 * @last_iter: last scan iteration number
1170 * the channels passed in the scan offload request.
1184 * matches passed in the scan offload request
1185 * @last_scan_age: age of the last offloaded scan
1188 * @gp2_invoked: GP2 when scan offload was invoked
1214 * the channels passed in the scan offload request.
1228 * matches passed in the scan offload request
1229 * @last_scan_age: age of the last offloaded scan
1232 * @gp2_invoked: GP2 when scan offload was invoked
1254 * @uid: scan id, &enum iwl_umac_scan_uid_offsets
1260 * @start_tsf: TSF timer in usecs of the scan start time for the mac specified
1262 * @results: array of scan results, length in @scanned_channels