Lines Matching refs:brcmf_err
770 brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); in brcmf_sdio_kso_control()
806 brcmf_err("HT Avail request error: %d\n", err); in brcmf_sdio_htclk()
814 brcmf_err("HT Avail read error: %d\n", err); in brcmf_sdio_htclk()
824 brcmf_err("Devctl error setting CA: %d\n", err); in brcmf_sdio_htclk()
857 brcmf_err("HT Avail request error: %d\n", err); in brcmf_sdio_htclk()
861 brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n", in brcmf_sdio_htclk()
873 brcmf_err("HT Clock should be on\n"); in brcmf_sdio_htclk()
894 brcmf_err("Failed access turning clock off: %d\n", in brcmf_sdio_htclk()
944 brcmf_err("request for %d -> %d\n", in brcmf_sdio_clkctl()
995 brcmf_err("error while changing bus sleep state %d\n", in brcmf_sdio_bus_sleep()
1055 brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr); in brcmf_sdio_readshared()
1080 brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", in brcmf_sdio_readshared()
1088 brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n", in brcmf_sdio_readshared()
1140 brcmf_err("unexpected NAKHANDLED!\n"); in brcmf_sdio_hostmail()
1154 brcmf_err("Version mismatch, dongle reports %d, " in brcmf_sdio_hostmail()
1194 brcmf_err("Unknown mailbox data content: 0x%02x\n", in brcmf_sdio_hostmail()
1209 brcmf_err("%sterminate frame%s\n", in brcmf_sdio_rxfail()
1232 brcmf_err("count growing: last 0x%04x now 0x%04x\n", in brcmf_sdio_rxfail()
1239 brcmf_err("count never zeroed: last 0x%04x\n", lastrbc); in brcmf_sdio_rxfail()
1263 brcmf_err("sdio error, abort command and terminate frame\n"); in brcmf_sdio_txfail()
1388 brcmf_err("HW header checksum error\n"); in brcmf_sdio_hdparse()
1394 brcmf_err("HW header length error\n"); in brcmf_sdio_hdparse()
1399 brcmf_err("HW superframe header length error\n"); in brcmf_sdio_hdparse()
1403 brcmf_err("HW subframe header length error\n"); in brcmf_sdio_hdparse()
1412 brcmf_err("Glom descriptor found in superframe head\n"); in brcmf_sdio_hdparse()
1420 brcmf_err("HW header length too long\n"); in brcmf_sdio_hdparse()
1427 brcmf_err("Wrong channel for superframe\n"); in brcmf_sdio_hdparse()
1433 brcmf_err("Wrong channel for subframe\n"); in brcmf_sdio_hdparse()
1439 brcmf_err("seq %d: bad data offset\n", rx_seq); in brcmf_sdio_hdparse()
1457 brcmf_err("seq %d: next length error\n", rx_seq); in brcmf_sdio_hdparse()
1472 brcmf_err("seq %d: max tx seq number error\n", rx_seq); in brcmf_sdio_hdparse()
1537 brcmf_err("bad glomd len(%d), ignore descriptor\n", in brcmf_sdio_rxglom()
1549 brcmf_err("descriptor len %d bad: %d\n", in brcmf_sdio_rxglom()
1555 brcmf_err("sublen %d not multiple of %d\n", in brcmf_sdio_rxglom()
1571 brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", in brcmf_sdio_rxglom()
1630 brcmf_err("glom read of %d bytes failed: %d\n", in brcmf_sdio_rxglom()
1791 brcmf_err("%d-byte control read exceeds %d-byte buffer\n", in brcmf_sdio_read_control()
1798 brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", in brcmf_sdio_read_control()
1811 brcmf_err("read %d control bytes failed: %d\n", in brcmf_sdio_read_control()
1827 brcmf_err("last control frame is being processed.\n"); in brcmf_sdio_read_control()
1894 brcmf_err("RXHEADER FAILED: %d\n", in brcmf_sdio_readframes()
1938 brcmf_err("brcmu_pkt_buf_get_skb failed\n"); in brcmf_sdio_readframes()
1952 brcmf_err("read %d bytes from channel %d failed: %d\n", in brcmf_sdio_readframes()
1980 brcmf_err("frame length mismatch:read %d, should be %d\n", in brcmf_sdio_readframes()
2001 brcmf_err("readahead on control packet %d?\n", in brcmf_sdio_readframes()
2028 brcmf_err("%s: glom superframe w/o " in brcmf_sdio_readframes()
2508 brcmf_err("Failed to force clock for F2: err %d\n", in brcmf_sdio_bus_stop()
2661 brcmf_err("Dongle reports WR_OOSYNC\n"); in brcmf_sdio_dpc()
2666 brcmf_err("Dongle reports RD_OOSYNC\n"); in brcmf_sdio_dpc()
2671 brcmf_err("Dongle reports SBINT\n"); in brcmf_sdio_dpc()
2708 brcmf_err("sdio ctrlframe tx failed err=%d\n", in brcmf_sdio_dpc()
2724 brcmf_err("failed backplane access over SDIO, halting operation\n"); in brcmf_sdio_dpc()
2784 brcmf_err("brcmu_pktq_pdeq_tail() failed\n"); in brcmf_sdio_prec_enq()
2791 brcmf_err("brcmu_pktq_penq() failed\n"); in brcmf_sdio_prec_enq()
2831 brcmf_err("out of bus->txq !!!\n"); in brcmf_sdio_bus_txdata()
3132 brcmf_err("assertion in dongle\n"); in brcmf_sdio_checkdied()
3135 brcmf_err("firmware trap in dongle\n"); in brcmf_sdio_checkdied()
3274 brcmf_err("resumed on timeout\n"); in brcmf_sdio_bus_rxctl()
3319 brcmf_err("error %d on reading %d membytes at 0x%08x\n", in brcmf_sdio_verifymemory()
3324 brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n", in brcmf_sdio_verifymemory()
3356 brcmf_err("error %d on writing %d membytes at 0x%08x\n", in brcmf_sdio_download_code_file()
3376 brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", in brcmf_sdio_download_nvram()
3400 brcmf_err("dongle image file download failed\n"); in brcmf_sdio_download_firmware()
3408 brcmf_err("dongle nvram file download failed\n"); in brcmf_sdio_download_firmware()
3414 brcmf_err("error getting out of ARM core reset\n"); in brcmf_sdio_download_firmware()
3461 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); in brcmf_sdio_sr_init()
3467 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); in brcmf_sdio_sr_init()
3476 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); in brcmf_sdio_sr_init()
3483 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); in brcmf_sdio_sr_init()
3507 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); in brcmf_sdio_kso_init()
3517 brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); in brcmf_sdio_kso_init()
3620 brcmf_err("error %d on reading %d membytes at 0x%08x\n", in brcmf_sdio_bus_get_memdump()
3647 brcmf_err("bus is null pointer, exiting\n"); in brcmf_sdio_isr()
3657 brcmf_err("failed backplane access\n"); in brcmf_sdio_isr()
3662 brcmf_err("isr w/o interrupt configured!\n"); in brcmf_sdio_isr()
3807 brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", in brcmf_sdio_drivestrengthinit()
3853 brcmf_err("error writing for HT off\n"); in brcmf_sdio_buscoreprep()
3862 brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", in brcmf_sdio_buscoreprep()
3873 brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", in brcmf_sdio_buscoreprep()
3977 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", in brcmf_sdio_probe_attach()
3985 brcmf_err("brcmf_chip_attach failed!\n"); in brcmf_sdio_probe_attach()
4005 brcmf_err("Failed to get device parameters\n"); in brcmf_sdio_probe_attach()
4034 brcmf_err("error enabling KSO\n"); in brcmf_sdio_probe_attach()
4256 brcmf_err("Failed to force clock for F2: err %d\n", err); in brcmf_sdio_firmware_callback()
4376 brcmf_err("intr register failed:%d\n", err); in brcmf_sdio_firmware_callback()
4389 brcmf_err("brcmf_alloc failed\n"); in brcmf_sdio_firmware_callback()
4396 brcmf_err("brcmf_attach failed\n"); in brcmf_sdio_firmware_callback()
4469 brcmf_err("insufficient memory to create txworkqueue\n"); in brcmf_sdio_probe()
4478 brcmf_err("brcmf_sdio_probe_attach failed\n"); in brcmf_sdio_probe()
4540 brcmf_err("async firmware request failed: %d\n", ret); in brcmf_sdio_probe()