704 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);  in brcmf_sdio_kso_control()
766 		brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,  in brcmf_sdio_kso_control()
789 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_htclk()
831 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");  in brcmf_sdio_htclk()
868 		brcmf_dbg(SDIO, "CLKCTL: turned ON\n");  in brcmf_sdio_htclk()
892 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");  in brcmf_sdio_htclk()
905 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_sdclk()
922 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_clkctl()
957 	brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate);  in brcmf_sdio_clkctl()
969 	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",  in brcmf_sdio_bus_sleep()
985 				brcmf_dbg(SDIO, "no clock, set ALP\n");  in brcmf_sdio_bus_sleep()
1011 	brcmf_dbg(SDIO, "new state %s\n",  in brcmf_sdio_bus_sleep()
1014 	brcmf_dbg(SDIO, "Exit: err=%d\n", err);  in brcmf_sdio_bus_sleep()
1060 	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);  in brcmf_sdio_readshared()
1116 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_hostmail()
1131 		brcmf_dbg(SDIO, "mailbox indicates firmware halted\n");  in brcmf_sdio_hostmail()
1137 		brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n",  in brcmf_sdio_hostmail()
1158 			brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",  in brcmf_sdio_hostmail()
1241 		brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries);  in brcmf_sdio_rxfail()
1446 		brcmf_dbg(SDIO, "seq %d, expected %d\n", rx_seq, rd->seq_num);  in brcmf_sdio_hdparse()
1528 	brcmf_dbg(SDIO, "start: glomd %p glom %p\n",  in brcmf_sdio_rxglom()
1584 			brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",  in brcmf_sdio_rxglom()
1588 				brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",  in brcmf_sdio_rxglom()
1607 			brcmf_dbg(GLOM, "try superframe read, packet chain:\n");  in brcmf_sdio_rxglom()
1609 				brcmf_dbg(GLOM, "    %p: %p len 0x%04x (%d)\n",  in brcmf_sdio_rxglom()
1762 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_read_control()
1865 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_readframes()
1877 			brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",  in brcmf_sdio_readframes()
1880 			brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);  in brcmf_sdio_readframes()
2019 				brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",  in brcmf_sdio_readframes()
2064 		brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);  in brcmf_sdio_readframes()
2066 		brcmf_dbg(DATA, "processed %d frames\n", rxcount);  in brcmf_sdio_readframes()
2303 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_txpkt()
2340 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_sendfromq()
2403 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_tx_ctrlframe()
2475 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_stop()
2512 		brcmf_dbg(INTR, "disable SDIO interrupts\n");  in brcmf_sdio_bus_stop()
2592 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_dpc()
2610 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",  in brcmf_sdio_dpc()
2677 		brcmf_dbg(SDIO, "Dongle reports CHIPACTIVE\n");  in brcmf_sdio_dpc()
2804 	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);  in brcmf_sdio_bus_txdata()
2822 	brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));  in brcmf_sdio_bus_txdata()
2940 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_txctl()
2957 			brcmf_dbg(SDIO, "ctrl_frame timeout\n");  in brcmf_sdio_bus_txctl()
2964 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",  in brcmf_sdio_bus_txctl()
3043 		brcmf_dbg(INFO, "no trap in firmware\n");  in brcmf_sdio_trap_info()
3092 		brcmf_dbg(INFO, "firmware not built with -assert\n");  in brcmf_sdio_assert_info()
3095 		brcmf_dbg(INFO, "no assert in dongle\n");  in brcmf_sdio_assert_info()
3130 		brcmf_dbg(INFO, "firmware not built with -assert\n");  in brcmf_sdio_checkdied()
3253 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_rxctl()
3271 		brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",  in brcmf_sdio_bus_rxctl()
3277 		brcmf_dbg(CTL, "cancelled\n");  in brcmf_sdio_bus_rxctl()
3280 		brcmf_dbg(CTL, "resumed for unknown reason?\n");  in brcmf_sdio_bus_rxctl()
3305 	brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr,  in brcmf_sdio_verifymemory()
3351 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_download_code_file()
3371 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_download_nvram()
3395 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);  in brcmf_sdio_download_firmware()
3442 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_sr_init()
3489 	brcmf_dbg(INFO, "SR enabled\n");  in brcmf_sdio_sr_init()
3499 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_kso_init()
3609 	brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase,  in brcmf_sdio_bus_get_memdump()
3644 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_isr()
3670 	brcmf_dbg(TIMER, "Enter\n");  in brcmf_sdio_bus_watchdog()
3734 				brcmf_dbg(SDIO, "idle\n");  in brcmf_sdio_bus_watchdog()
3816 		brcmf_dbg(INFO, "No SDIO driver strength init needed for chip %s rev %d pmurev %d\n",  in brcmf_sdio_drivestrengthinit()
3838 		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",  in brcmf_sdio_drivestrengthinit()
4159 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_bus_reset()
4217 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);  in brcmf_sdio_firmware_callback()
4266 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);  in brcmf_sdio_firmware_callback()
4278 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4291 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4305 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4318 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4333 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4412 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);  in brcmf_sdio_firmware_callback()
4450 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_probe()
4529 	brcmf_dbg(INFO, "completed!!\n");  in brcmf_sdio_probe()
4555 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_remove()
4601 	brcmf_dbg(TRACE, "Disconnected\n");  in brcmf_sdio_remove()