net/usb/asix_devices.c

55 		netdev_dbg(dev->net, "Link Status is: %d\n", link);
183 	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
252 		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
389 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
437 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
454 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
458 	netdev_dbg(dev->net,
482 		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
519 			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
532 		netdev_dbg(dev->net,
555 		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
581 	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
585 	netdev_dbg(dev->net,
624 	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
857 			netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
880 		netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
895 		netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
978 	netdev_dbg(dev->net, "marvell_phy_init()\n");
981 	netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
989 		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
998 		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
1008 	netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
1029 	netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
1045 	netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
1062 		netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
1066 	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
1071 		netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
1077 	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
1088 	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
1098 		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
1105 	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
1154 	netdev_dbg(dev->net, "ax88178_link_reset()\n");
1175 	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
1226 	netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
1264 		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);