mellanox/mlxsw/reg.h

88  * Note: Must be set for Spectrum.
320  * For Spectrum-2 when set_vid=0 and smpe_valid=1, the smpe will modify the vid.
334  * For Spectrum: use FID for both Dynamic and Static entries.
400  * For Spectrum-2 when set_vid=0 and smpe_valid=1, the smpe will modify the vid.
414  * For Spectrum: use FID for both Dynamic and Static entries.
459  * For Spectrum this value must be set to 0x1FFF
739  * Reserved on Spectrum.
815  * Reserved when SwitchX/-2 or Spectrum-1.
837  * Reserved when Spectrum-1.
847  * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2
1706  * Note: Reserved when SwitchX/-2 or Spectrum-1.
1765  * For Spectrum family, this affects the values of SPVM.i
1779  * For Spectrum family, this affects the values of SPVM.e,u,pt.
1946  * Spectrum-1.
1956  * Spectrum-1.
2274  * Note: Reserved when legacy bridge model is used and on Spectrum-2.
2282  * Note: Reserved when legacy bridge model is used and on Spectrum-2.
2555  * Must be set to 1 for Spectrum.
2715  * For Spectrum and Spectrum-2, this is always type 2 - "flexible"
2722 	MLXSW_REG_PTAR_KEY_TYPE_FLEX2 = 0x51, /* Spectrum-2 */
2876  * For Spectrum, the index points to the KVD Linear.
3033  * This register is not supported by SwitchX/-2 and Spectrum.
3329  * A-TCAM. This register is not supported by SwitchX/-2 and Spectrum.
3362  * For Spectrum-2 range is 1..cap_kvd_size - 1
3420  * Note: In Spectrum-2, a region of 8 key blocks must be set to either
4073  * Supported only on Spectrum-1
4089  * Note: Used for max shaper configuration. For Spectrum, packets mode
4156  * For Spectrum-1: Range is: 5..25
4157  * For Spectrum-2: Range is: 11..25
4437  * Supported only on Spectrum-1.
5690  * Spectrum, as it maps untagged packets based on the default switch priority.
5783  * Note: In Spectrum, reserved for buffer[9].
5795  * Note: In Spectrum, reserved for buffer[9].
6457  * Note: Mirroring to a mirroring agent is only supported in Spectrum.
6762  * Reserved for SwitchX-2. For Spectrum, editing of interface properties
6844  * In Spectrum, all MAC addresses must have the same 38 MSBits.
6876  * Note: Reserved when legacy bridge model is used and on Spectrum-1.
6930 	/* IPinIP generic - used for Spectrum-2 underlay RIF */
6967  * Reserved for Spectrum-2.
6974  * Reserved for Spectrum.
7260 	 * Reserved for Spectrum.
7265 	 * Reserved for Spectrum.
7269 	 * Reserved for Spectrum.
7292  * For Spectrum, the index is to the KVD linear.
7365  * For Spectrum: Pointer to KVD linear space.
8013  * For Spectrum, pointer to KVD Linear.
8509  * For Spectrum, Index to KVD Linear.
8583  * pointer to the IPv6 DIP which is configured by RIPS. For Spectrum, the index
8653  * For Spectrum, the index is to the KVD linear.
8697  * Spectrum-1: 32-64, 512, 1024, 2048, 4096
8698  * Spectrum-2/3: 32-128, 256, 512, 1024, 2048, 4096
10031  * Reserved when Spectrum-1.
10303  * In Spectrum-2, the field is reversed, positive values mean to decrease the
10321  * Reserved on Spectrum-1.
10331  * Reserved on Spectrum-1.
10787  * Reserved when IB switches and when SwitchX/-2, Spectrum-2
10796  * Reserved when IB switches and when SwitchX/-2, Spectrum-2
10804  * Reserved when SwitchX/-2, Switch-IB/2, Spectrum-1 and Quantum.
10812  * Note: This register is not supported by current FW versions for Spectrum-1.
10916  * Reserved when Spectrum-2.
10955  * Reserved when Spectrum-2.
11025  * For Spectrum-1 the PLL clock is 156.25Mhz and PLL clock time is 6.4nSec.
11931  * Note: For Spectrum the NVE parsing must be enabled in MPRS.
11971 	/* Flow label is static. In Spectrum this means '0'. Spectrum-2
11995  * Reserved when nve_flh=1 and for Spectrum.
12009  * Spectrum uses LAG hash (SLCRv2). Spectrum-2 uses ECMP hash (RECRv2).
12046  * Reserved when Spectrum-2. See TNPC.
12053  * Reserved when Spectrum-2.
12060  * Reserved when Spectrum.
12072  * Underlay source IPv6 address of the NVE. For Spectrum, must not be
12126  * For Spectrum the index is to the KVD linear.
12322  * Reserved when Spectrum.
12883  * For Spectrum this is used for egress mirroring.